r/ft86 • u/Subtlefocus • 6h ago
r/ft86 • u/Sea-Foundation-449 • 6h ago
Are manual twins tricky to shift smoothly? Experience with a Jeep Wrangler TJ
I taught myself how to drive stick a little over a year ago on a 2015 FR-S, and now I’m at the point I can shift quickly and smoothly enough that if you were in the passenger seat, you might mistakenly think you’re riding in an automatic. However, that didn’t come naturally to me. I spent hours and hours driving before I felt like I really started to get the hang of it
It feels to me like the timing, motions, and clutch modulation can be pretty tricky if you’re trying to be as smooth as possible, but having never driven any other manual car before, I just assumed that was pretty normal
Then a couple days ago I drove a manual Jeep Wrangler TJ (1997-2006), and I thought “Alright, at first I’m going to suck. I’ll have to find the bite point and learn how and when this thing likes to shift, and it’ll probably be a little rough at first”
But it wasn’t. It was stupidly easy to drive. It was a wildly different experience compared to my FR-S, and extremely forgiving and smooth
In terms of smoothness, is the Wrangler easy to operate or are the twins tricky to operate? How do they compare to other manuals?
r/ft86 • u/CoalFoggy • 4h ago
Farewell
This was my dream car since I was a teenager so when I started to earn my own money I made it my goal to get it. So I did. This has been a great 2.5 years and not once did I ever drive my 86 and not smile. Today I said goodbye to my dream car and that chapter has now closed for me. It’s genuinely been such a pleasure to be apart of this community and I’m gonna miss being apart of it. Thanks guys!!!!
r/ft86 • u/No-Crust-Racing • 15h ago
86/BRZ/FRS Free STLs
Your annual reminder that these 86 bits are all free for you to use/print yourself on makerworld.
A like and 5 start rating is always appreciated too 🤝
52mm Gauge Pod Vent Adaptor
https://makerworld.com/en/models/1664988-52mm-gauge-pod-vent-adaptor-brz-frs-86#profileId-1761919
Headlight Washer Covers
https://makerworld.com/en/models/2623106-86-frs-headlight-washer-cover#profileId-2895514
Spoiler hole plugs
https://makerworld.com/en/models/2912595-86-brz-frs-boot-trunk-plug-set#profileId-3257715
r/ft86 • u/Few_Investment_5320 • 17m ago
Hey everyone! Heres my 18 tS
To keep a long story short, I've always wanted a tS since I watched the first tS get unloaded in Fairbanks Alaska, at the time I was in the army and had a ZN6. I said one day ill get one.
Fast forward to 2026, I daily drove a KLR650 and saved, then we bought our first house and I still wanted to get a tS. I told the wife 2027 will be the year but for giggles I looked online and found the holy grail (for me) a 40k mile 18 tS, 1 owner, and no wrecks. Instantly I told the wife and we both agreed we couldn't wait, so here she is #106 of 500!
r/ft86 • u/Crazy-Strawberry2879 • 1h ago
Are people actively taking off pick up tube to check for debris these days?
Is anyone using the FEL pro Oil pan gasket instead of RTV?
I currently have my headers off as I've just drained and chained oil and had the oil pan off to swap it for one without a turbo drain.
I'm on the fence of pulling it back off to check my oil pick up... Are people doing this regularly to avoid a an engine failure?
I have a spare rod knocked engine I bought that's partially stripped and today I just pulled the pick up tube off randomly out of curiosity and what I saw shocked me. Chunks of RTV and just gunk all up in there... Oil could still flow but definitely restricted which I guess is why the engine failed It's made me paranoid about not pulling off mine now to double check...
Are people doing this or am I being super paranoid?
Help choosing new head unit
Just bought a 2013 FRS and ideally want to get a backup camera but the current head unit is the one in the picture.
Any recommendations on what mounting kit + head unit I should get? Something cheap is fine just need something that’ll work well.
r/ft86 • u/Drummer1324 • 2h ago
Looking to buy soon! Which would you guys get?
Hello! I’m looking to get a first gen manual BRZ/ FRS/ 86 soon to use mostly as a track car. Looking at prices in SoCal it looks to be around $10k for a car with 100-120k miles or around $15k ish for a car with about 50-60k miles. Do you think it’s worth it to spend the extra to get lower mileage? Just trying to narrow down where I’m looking a bit! Thanks! Also any recommendations for mods for tracking would be great. Looking to get as close to a stock car as possible and then add any mods as needed. Thanks!
Over 13 years and I still can’t help but stare at those lines every chance I get. Toyota really made something special with these cars ….except for:
…..the EPS bushing. Fuck that stupid little thing. If anyone in the SoCal area is able to replace that for me ( I have the replacement, just no space or tools to do the work) I’ll gladly pay you for your time and skill. Thanks!
r/ft86 • u/Due-Range6216 • 14h ago
Planing on buying a 2012 GT86 anything I should know?
Hey guys so I'm planning on buying a 2012 GT86 if our negotiation works out, anything I should know and should look out for?
r/ft86 • u/Illustrious_Camp_496 • 17h ago
It finally happened haha P0172 and P1180.
My car recently dropped into limp mode while idling—it still drives, but hesitates and stutters. I pulled codes P0172 and P1170, indicating it's running rich due to a fuel delivery fault. I went ahead and cleaned the MAF sensor and reusable intake filter just to rule out an air restriction, so at this point I'm leaning toward a failing or stuck-open fuel injector, especially since first-gen have been an issue to a few members on these early models.
Funny, took to shop to run codes and they verified these two. My traction light and CEL were on. Drove home and only CEL is on now.
🤷 🤷♀️ 🤷♂️
I’ll keep y’all posted. No one seems to have solved their issues. Instead, from threads I read, many users found new issues or future issues on their journey to this mystery.
‘14, mt, 92k mi and stock. 5k oil changes. Air filter I haven’t done in like 30k and I live in very dirty area.
24hrs later. 7:30am 11/18/26
I’m taking to local shop after work.
I cleaned maf, map, reoiled and cleaned TRD intake. Only CEL on. Car turned on fine. Noticed backfire at 2k rpm when revving from idle.
Will drive after work to shop and report as soon as soon as I can. Cheers.
Son's used BRZ won't start.
Hey all first time here looking to crowdsource advice. He used it last night fine. Temp dropped below freezing for the first time last night. Would not start this morning.
This afternoon still not starting. Here's a video off our attempts. The knocking is him using a hammer to tap the starter. Jump pack hooked up to it just in case.
Thinking, it must be related to the starter. Like a solenoid not engaging. It's an automatic, so we can see that the flex plate is not rotating.
Do you think just replacing the starter is the likely best first option to try? Tyia
r/ft86 • u/Distinct-Pie9705 • 16h ago
What are some good short shifters for a 2013 frs?
Lmk if u guys think it’s even worth it and what to buy but I heard it makes it feel like a mx5 shifter and way more direct.
r/ft86 • u/DR0PaGEARdisappear • 22h ago
Can't find a replacment anywhere?
I got the OLM spec d headlights and the driver side ballast burnt out. I confirmed by switching it to the passenger side which was working and vise versa. Any chance someone knows where to get a replacement?
Headlights are only a year old and I RARELY drive at night so the ballast should not have burnt out this fast. I already messaged olm but it says they arnt in stock so im sure they cant do anything anyways. Also dont have purchase recept I forget what website I got them from.
Im sure alot of you already know this but spec d is JUNK.. clear coat is already failing and now this. 500$ for this junk.. Should have just got oem brz headlights
r/ft86 • u/Eva-Unit0013 • 1d ago
What are those and which tool do I need
Hello, I wanted to buy a new head unit for my gt86 and I have never seen those screws. Do I need an special tool for those?
r/ft86 • u/Sensitive-Hotel3165 • 1d ago
Oil reading help
Took my 86 to Toyota for an oil change since my current living situation doesn’t allow for me to do my own maintenance
Anyway, I was suspicious of them and checked the dipstick as any good owner would. I know these are notoriously hard to read but based on this pic, how over filled am I?
This is a dead cold engine, 55° F outside, on level ground on the lower reading side of the dip stick
I read it cold every time to establish a consistent baseline, last time I did the oil it was exactly at full when cold (top dot)
Thanks
r/ft86 • u/Upset_Implement_6597 • 1d ago
Audio upgrades
All stock audio currently. Bought an ENA-2S1 amp and waiting for it to ship.
Do I need to get new speaker too, to get the most out of the amp? Not entirely sure if the limiting equipment in the stock brz is the speakers or head unit power
r/ft86 • u/gisio836 • 2d ago
I made a mistake
TL;DR: Don’t buy a low mileage FT86 that sat for 4+ years. Especially if you are young.
As a 19 year old, I worked my ass off to be able to afford the car I always wanted. An FRS/86. So I finally saved up the money, got a decent loan, and went out and got one.
The car was everything I wanted, it came with tons of tasteful mods that most FT86 owners have on their own builds (headers, tune, wheels, coilovers, cat back, i could go on for a while) The PPI was great, everything looked great, no codes, and it ran great. The dealer serviced the car (fluids, brakes, etc.), and the car came with only 13,000 miles, I figured I would be out of the money pit of a car that I owned previously. Boy was I wrong. 3-4 weeks into owning the car that I loved, I get a check engine light. It’s a P0011 (Bank 1 Over-Advanced cam timing). After a few key cycles, the code went away, I thought everything was fine and it was just a random occurrence. I was wrong.
Week after week, this code comes back. I’ve tried swapping the sensors, thicker viscosity oil, playing with the connector. Nothing worked.
I get a shop to do some diag. I’m told that I have a failing cam sprocket and it needs replaced ASAP, or else my piston will eventually start marking contact with the valves. Every shop I’ve gone to wants at least $4,000 to replace all 4. The ECM is also now probably burnt from incorrect cam positions. I still owe money on the car. I thought I found a unicorn for a decent price. Now I’m worse off than I was with my previous situation. I end up finally reaching the original tuner of the car, he says he thinks it sat for at least 4 years and there could be a plethora of issues, but this is an extremely rare case for a low mileage example. He tells me he has only seen this code on fully rebuilt motors and high mileage examples. I’m now in a position where I probably have to get rid of it, and chin the rest of the loan. I can’t afford the repair, and I have no other solutions. Any extra opinion/story with this code would be appreciated. I loved it while it lasted, even if it was only a handful of months.
“Experience is the hardest kind of teacher. It gives you the test first and the lesson afterward.” - Vernon Sanders Law
r/ft86 • u/AdAlone4082 • 1d ago
Have you seen this before? (looking for help)
Pre-face: I own a Base model 2017 GT86 that had spun a bearing not too long ago. Decided this was the perfect time to manual swap it while I was in there. Bought all the cool little odds and ends to make it work. It didn't. I definitely missed something. Mechanically the car is sound.
List of parts swapped in:
2017 BRZ limited Bay Harness
2017 BRZ limited Dash Harness
Manual Transmission Components (Driveshaft, Clutch Assy, Transmission)
Dual climate control HVAC Assy
2017 BRZ limited push to start components (ECU, Button, Receiver, Tachometer, Steering column)
2013 FRS ABS, (2017 BRZ limited ABS on order will be swapped)
Current issue(s):
- Radiator fan will not turn on sometimes. When first tested only came on after driving, now it doesn't at all.
- Actions taken:
- -Attempted to swap fuses/relays from old working fuse box to new one, did not work.
- -Assumed fan motors gave out because it will not power on with A/C full blast. New radiator fan does the same.
- Current thoughts: check voltage readings between the connectors and the fuse box (no visual damage had been found)
- ABS does not read at all.
- Actions taken/Current thoughts:
- Ordered a matching year ABS because I believe it's a pin-out mismatch and isn't receiving power causing it to through every ABS code.
- Key FOB kinda not recognized.
- Key FOB will start the car when presented to the button, but all remote controls do not get responded too. (I can push the buttons and the light on the FOB comes on but nothing happens.)
- Actions taken:
- -Swapped battery in the key FOB, no change.
- Current thoughts: Despite all of the electronics from the kit (as pictured with the immobilizer set) being installed. There is a miscommunication or interference between all the computers.
- Passenger Side Window does not work.
- Actions taken: None
- Current thoughts: The connector or wires are damaged somewhere along the harness.
Edit:
5. Headlights stuck on Highbeams. When normal running lights should be on turns off on daytime and off setting is enabled. Fog lights also don't work or Side markers.
Actions taken: fuses checked and swapped, Dimmer relay swapped but didn't solve the issue.
Current Thoughts: Dimmer relay is "Stuck" on High setting
Disclaimer: I have not probed anything on the car to check for voltages because I do not own a multimeter. I know I will need one to test for constant voltage just haven't gotten around to it yet and will do soon.
The car is drive-able and shifts great, with the exception of the fans issue. Just wanted to se if anyone has done something similar and has experienced this or if I could get some guidance from peeps knowledgeable in the platforms systems.
TLDR; I swapped 2017 BRZ limited parts and a manual into my Base GT86 and now some of it works. But idk bout the rest.
Pictures included are of the parts purchased and installed:
Thanks for the help. I did swap all by myself and suprised i even made it this far
r/ft86 • u/NeilEnsuc • 1d ago
Climate Control Lights
Has anyone else had some of these go out? If so, are they a pain to change?
r/ft86 • u/Takoyaki_18 • 1d ago
Does GR86 oem steering wheel fit FRS? (Anyone tried?)
My FRS steering wheel is peeling and needs to be replaced. I like the GR86 steering wheel, anyone know if I can use that steering wheel and reuse my FRS air bag? As for the buttons, I would use the black cover (SU003-06965)
Is it a direct swap, has anyone else done this?