r/ft86 • • 12m ago

New Tires!

Thumbnail
gallery
1 Upvotes

put some all season falken 235 45 17, im definitely already loving them. (complete upgrade from the lexanis the previous owner had on it). went with all season because it doesn't snow much here.


r/ft86 • • 3h ago

New JDL header is rattling

Thumbnail reddit.com
1 Upvotes

r/ft86 • • 5h ago

PSA about HKS spark plug wrench set

11 Upvotes

TLDR: The 14mm socket included in the HKS wrench set is magnetic so it's good for taking spark plugs out but makes it nearly impossible to put them back in.


r/ft86 • • 7h ago

what lip is this

Post image
6 Upvotes

i bought my car with this lip and lost it upon a little oopsie, anyone know which exact lip it is? please


r/ft86 • • 8h ago

Intermittent floaty steering

Post image
1 Upvotes

Im experiencing the above my 2012 BRZ. Completely unmodded and on 17’ wheels with 225/45 Tyres (goodyear eagle f1 6 that are relatively new - ive tried various different tyre pressures too)
As per the title it seems to come and go and am begging to suspect its linked to epas however i have no warning lights.

It seems to exhibit signs of a very vague and overly light feel at centre and the steering will feel imprecise. Before anyone suggests alignment ive had this done three times to the recommended specs - to no avail.
Ive also replaced the control arms, track rod ends and drop links within the last year.
Overall when the steering behaviour appears the steering feels over assisted and as if there is play in the steering - almost mushy. In the wet and cold conditions it almost feels dangerously light!

Admittedly the front shock absorbers and springs need updating but surely the steering weight wouldnt vary so much despite this?
Strangely it seems to feel better early in the morning on first start up and when the car is fully warmed up commuting home…odd.

Does this point to signs of a failing rack or an epas problem? Or even a loose rack? I often hear some marques of being able to adjust the steering angle sensor but not so much on these cars.

Its definitely gotten worse as of late and im hitting my head against a brick wall getting a diagnosis on this without firing a parts canon at the car which hasnt worked so far…has anyone else experienced this?


r/ft86 • • 8h ago

Personal experience/opinions on additives? E.g. Liqui Moly Ceratec

0 Upvotes

I'm thinking of adding an anti friction additive just in case to reduce metal on metal contact as much as possible. I regularly do short trips which increase the accumulation of gas/condensation in my oil. Im currently running Valvoline 5w30 restore & protect and was wondering if adding something like Ceratec would be a good idea


r/ft86 • • 10h ago

Hey everyone! Heres my 18 tS

Post image
27 Upvotes

To keep a long story short, I've always wanted a tS since I watched the first tS get unloaded in Fairbanks Alaska, at the time I was in the army and had a ZN6. I said one day ill get one.

Fast forward to 2026, I daily drove a KLR650 and saved, then we bought our first house and I still wanted to get a tS. I told the wife 2027 will be the year but for giggles I looked online and found the holy grail (for me) a 40k mile 18 tS, 1 owner, and no wrecks. Instantly I told the wife and we both agreed we couldn't wait, so here she is #106 of 500!


r/ft86 • • 12h ago

Are people actively taking off pick up tube to check for debris these days?

2 Upvotes

Is anyone using the FEL pro Oil pan gasket instead of RTV?

I currently have my headers off as I've just drained and chained oil and had the oil pan off to swap it for one without a turbo drain.

I'm on the fence of pulling it back off to check my oil pick up... Are people doing this regularly to avoid a an engine failure?

I have a spare rod knocked engine I bought that's partially stripped and today I just pulled the pick up tube off randomly out of curiosity and what I saw shocked me. Chunks of RTV and just gunk all up in there... Oil could still flow but definitely restricted which I guess is why the engine failed It's made me paranoid about not pulling off mine now to double check...

Are people doing this or am I being super paranoid?


r/ft86 • • 13h ago

Looking to buy soon! Which would you guys get?

1 Upvotes

Hello! I’m looking to get a first gen manual BRZ/ FRS/ 86 soon to use mostly as a track car. Looking at prices in SoCal it looks to be around $10k for a car with 100-120k miles or around $15k ish for a car with about 50-60k miles. Do you think it’s worth it to spend the extra to get lower mileage? Just trying to narrow down where I’m looking a bit! Thanks! Also any recommendations for mods for tracking would be great. Looking to get as close to a stock car as possible and then add any mods as needed. Thanks!


r/ft86 • • 14h ago

Farewell

Post image
26 Upvotes

This was my dream car since I was a teenager so when I started to earn my own money I made it my goal to get it. So I did. This has been a great 2.5 years and not once did I ever drive my 86 and not smile. Today I said goodbye to my dream car and that chapter has now closed for me. It’s genuinely been such a pleasure to be apart of this community and I’m gonna miss being apart of it. Thanks guys!!!!


r/ft86 • • 16h ago

Help choosing new head unit

Post image
5 Upvotes

Just bought a 2013 FRS and ideally want to get a backup camera but the current head unit is the one in the picture.

Any recommendations on what mounting kit + head unit I should get? Something cheap is fine just need something that’ll work well.


r/ft86 • • 16h ago

Are manual twins tricky to shift smoothly? Experience with a Jeep Wrangler TJ

Post image
43 Upvotes

I taught myself how to drive stick a little over a year ago on a 2015 FR-S, and now I’m at the point I can shift quickly and smoothly enough that if you were in the passenger seat, you might mistakenly think you’re riding in an automatic. However, that didn’t come naturally to me. I spent hours and hours driving before I felt like I really started to get the hang of it

It feels to me like the timing, motions, and clutch modulation can be pretty tricky if you’re trying to be as smooth as possible, but having never driven any other manual car before, I just assumed that was pretty normal

Then a couple days ago I drove a manual Jeep Wrangler TJ (1997-2006), and I thought “Alright, at first I’m going to suck. I’ll have to find the bite point and learn how and when this thing likes to shift, and it’ll probably be a little rough at first”

But it wasn’t. It was stupidly easy to drive. It was a wildly different experience compared to my FR-S, and extremely forgiving and smooth

In terms of smoothness, is the Wrangler easy to operate or are the twins tricky to operate? How do they compare to other manuals?


r/ft86 • • 17h ago

It’s that time of the year again.

Post image
114 Upvotes

r/ft86 • • 1d ago

Planing on buying a 2012 GT86 anything I should know?

4 Upvotes

Hey guys so I'm planning on buying a 2012 GT86 if our negotiation works out, anything I should know and should look out for?


r/ft86 • • 1d ago Bravo

86/BRZ/FRS Free STLs

Thumbnail
gallery
71 Upvotes

Your annual reminder that these 86 bits are all free for you to use/print yourself on makerworld.

A like and 5 start rating is always appreciated too 🤝

52mm Gauge Pod Vent Adaptor
https://makerworld.com/en/models/1664988-52mm-gauge-pod-vent-adaptor-brz-frs-86#profileId-1761919

Headlight Washer Covers
https://makerworld.com/en/models/2623106-86-frs-headlight-washer-cover#profileId-2895514

Spoiler hole plugs
https://makerworld.com/en/models/2912595-86-brz-frs-boot-trunk-plug-set#profileId-3257715


r/ft86 • • 1d ago

What are some good short shifters for a 2013 frs?

1 Upvotes

Lmk if u guys think it’s even worth it and what to buy but I heard it makes it feel like a mx5 shifter and way more direct.


r/ft86 • • 1d ago

It finally happened haha P0172 and P1180.

4 Upvotes

My car recently dropped into limp mode while idling—it still drives, but hesitates and stutters. I pulled codes P0172 and P1170, indicating it's running rich due to a fuel delivery fault. I went ahead and cleaned the MAF sensor and reusable intake filter just to rule out an air restriction, so at this point I'm leaning toward a failing or stuck-open fuel injector, especially since first-gen have been an issue to a few members on these early models.

Funny, took to shop to run codes and they verified these two. My traction light and CEL were on. Drove home and only CEL is on now.

🤷 🤷‍♀️ 🤷‍♂️

I’ll keep y’all posted. No one seems to have solved their issues. Instead, from threads I read, many users found new issues or future issues on their journey to this mystery.

‘14, mt, 92k mi and stock. 5k oil changes. Air filter I haven’t done in like 30k and I live in very dirty area.

24hrs later. 7:30am 11/18/26

I’m taking to local shop after work.

I cleaned maf, map, reoiled and cleaned TRD intake. Only CEL on. Car turned on fine. Noticed backfire at 2k rpm when revving from idle.

Will drive after work to shop and report as soon as soon as I can.

11/18 it’s 7pm now. Tired. Gnighty.

Dropped at shop. Been there 2hrs. Leaving overnight.

Cheers.


r/ft86 • • 1d ago

Could be a magazine cover

Post image
44 Upvotes

r/ft86 • • 1d ago

Can't find a replacment anywhere?

Post image
3 Upvotes

I got the OLM spec d headlights and the driver side ballast burnt out. I confirmed by switching it to the passenger side which was working and vise versa. Any chance someone knows where to get a replacement?

Headlights are only a year old and I RARELY drive at night so the ballast should not have burnt out this fast. I already messaged olm but it says they arnt in stock so im sure they cant do anything anyways. Also dont have purchase recept I forget what website I got them from.

Im sure alot of you already know this but spec d is JUNK.. clear coat is already failing and now this. 500$ for this junk.. Should have just got oem brz headlights


r/ft86 • • 1d ago

Oil reading help

Post image
2 Upvotes

Took my 86 to Toyota for an oil change since my current living situation doesn’t allow for me to do my own maintenance

Anyway, I was suspicious of them and checked the dipstick as any good owner would. I know these are notoriously hard to read but based on this pic, how over filled am I?

This is a dead cold engine, 55° F outside, on level ground on the lower reading side of the dip stick

I read it cold every time to establish a consistent baseline, last time I did the oil it was exactly at full when cold (top dot)

Thanks


r/ft86 • • 1d ago

Son's used BRZ won't start.

Thumbnail
youtu.be
11 Upvotes

Hey all first time here looking to crowdsource advice. He used it last night fine. Temp dropped below freezing for the first time last night. Would not start this morning.

This afternoon still not starting. Here's a video off our attempts. The knocking is him using a hammer to tap the starter. Jump pack hooked up to it just in case.

Thinking, it must be related to the starter. Like a solenoid not engaging. It's an automatic, so we can see that the flex plate is not rotating.

Do you think just replacing the starter is the likely best first option to try? Tyia


r/ft86 • • 1d ago

What are those and which tool do I need

Thumbnail
gallery
5 Upvotes

Hello, I wanted to buy a new head unit for my gt86 and I have never seen those screws. Do I need an special tool for those?


r/ft86 • • 1d ago

Audio upgrades

2 Upvotes

All stock audio currently. Bought an ENA-2S1 amp and waiting for it to ship.

Do I need to get new speaker too, to get the most out of the amp? Not entirely sure if the limiting equipment in the stock brz is the speakers or head unit power


r/ft86 • • 1d ago

Over 13 years and I still can’t help but stare at those lines every chance I get. Toyota really made something special with these cars ….except for:

Thumbnail
gallery
128 Upvotes

…..the EPS bushing. Fuck that stupid little thing. If anyone in the SoCal area is able to replace that for me ( I have the replacement, just no space or tools to do the work) I’ll gladly pay you for your time and skill. Thanks!