r/guns • • 1d ago

Official Politics Thread 11/18/26

18 Upvotes

This is the thread for discussing politics as it relates to guns.


r/guns • • 14h ago

Thickheaded Thursday 11/19/26

9 Upvotes

Lack of trigger discipline edition


r/guns • • 5h ago

Im a cowboy, baby

Post image
70 Upvotes

r/guns • • 15h ago

The Pancor Jackhammer is an abomination of 3 separate firearms; it's a full auto bullpup gas operated revolver.

Post image
436 Upvotes

r/guns • • 15h ago

New Blick:

Post image
353 Upvotes

Unfortunately my state has a waiting period, so I don't have it yet. However, my excitement is immeasurable, and my day is fixed.


r/guns • • 51m ago

The Stoeger Cougar Post

Thumbnail
imgur.com
12 Upvotes

Edit1: Click on the pic to see the album!

Hey all,

My name is Austin_Destroyer, and I love cougars. I also really like the Beretta and Stoeger 8000 series of pistols as well.

ba-dum tiss

Now that I've preemptively made you silly joke in the comments, let's get down to brass tacks. When I first bought a Cougar, I went through many forums and came across a bunch of conflicting information. This post is a compilation of what I've learned. The Beretta Cougar was a series of pistols made by Beretta from 1994 to 2004. It was chambered in a variety of calibers, but is most commonly seen in 9mm (8000), .40cal (8040), and .45acp (8045). The pistol also has an letter designator after the digits that is either D, F, FL, or FT.

NOTE: Beretta models have a straight/blocky slide and barrel, unless it is an FL. The slide is contoured differently with a narrower bore opening and the barrel wall diameter is thinner. Stoeger adopted the FL style slide and barrel for all 9mm Cougar models. See picture for barrel comparison.

D=double-action only

F=double action/single action, no rail

FL=double action/single action, compact grip, reduced material slide/barrel

FT=double action/single action, with rail (Stoeger only)

The time period in which the Cougar was made by Beretta saw the rise in popularity of striker-fired pistols, and there was little enthusiasm to throw off the Beretta 92. In 2004, Beretta sent the machinery to build the pistol their subsidiary, Stoeger (in Turkey) to continue production of the pistol. Simultaneously, Beretta began producing the PX4 series, with its familiar rotating barrel, safetly/decocker, but new-to-Beretta polymer frame. Cougars were purportedly designed to be a compact alternative to the Beretta 90 series of pistol, featuring a 3.6" rotating barrel to reduce felt recoil. While the rotating barrel does reduce recoil, it does also make the pistol incompatible with suppressors. Beyond the barrel, there are a few design overlaps with the Beretta 90 series that are completely interchangeable with the Cougar. These include:

-Magazine release, hammer, hammer spring, front/rear dovetail sights (92a1, NOT Brigadier), grip screws

Although the magazine is the same in dimensions as a Beretta 92 magazine, the notch the magazine catch is a few millimeters higher on Cougar magazines.

There are very few Cougar-specific upgrades out there. Hogue still has G10, aluminum, and fancy wood grips available. The DPM recoil spring fits the Beretta models, but not the Stoeger Cougars. I reached out to DPM about this and they said the issue was the central block. Originally, the Stoeger Cougar had a plastic guide rod and a central block specific to it. Later, metal guide rods were introduced and the central block changed. I tried using each block with a DPM recoil system, and the guide rod extended beyond the frame of the pistol. It is possible that the FL-type slides are also not compatible with the DPM recoil system. Regardless, I returned it so perhaps we'll never know.

The Cougar series also features a slide-mounted safety/decocker lever like what is found on the Beretta 92 and later, the PX4. This lever is easily modified to be decocker-only by the removal of the ball detent. Beretta 92 magazines are nearly compatible, with the Cougar-style notch being placed a few millimeters higher than that of the 92 series.

Some thoughts:

-There are no complete disassembly guides available for any Cougar that I could find, but is somewhere between a PX4 and a Beretta 92. Those guides will get you most of the way. There is an extra step in the safety/decocker with a remarkably silly little spring/pin on the right side, and if you're not careful, it's easy to warp the right side safety selector spring. I am considering filming or taking pictures of my own disassembly process. Holler if that's something you'd be interested in.

-Stoeger finishes are a bit rough and Beretta's Bruniton leaves something to be desired. The barrel and slide of my Stoeger Cougar 8000F received a black nitride treatment from JagerWerks and I absolutely love it.

-The pretravel on the trigger pull is pretty long and there's nothing you can really do about it, outside of modifying the trigger barrel. I know there is a Redditor who has modified his trigger bar to accommodate a Beretta match hammer, but this cannot be done with factory parts.

-I believe Stoeger uses the equivalent of a D spring as the stock spring for their Cougars, though I do not know if that is the case with the Beretta models. Personally, I have a Wilson Combat 14# hammer spring in my 8000F and a Wilson Combat 13# hammer spring in my 8000FT.

-On the topic of the D spring: beware. The Beretta D spring I purchased originally was significantly shorter than Wilson combat 16# and 14# springs that I own, as well as the stock Stoeger spring I pulled out of my pistol. The Beretta D spring was responsible for 2 light strikes with CCI Blazer 124g ammo on a trip to the range, and was promptly removed when I got home.

-Mec-Gar 18rd Beretta 92 magazines are pretty nice in the Cougar, once you cut a magazine catch notch. BUT, you need to MEASURE, MEASURE, MEASURE. If your notch is too low, you'll have feeding issues. If your notch is too high, the magazine base plate will be stuck on your grip panels. Nevertheless, a Dremel, jeweler's file, and 20 minutes of patience will have you saving a good deal of money because Cougar magazines are out of production (unless you buy Pro-Mag, but like, don't, you're better than that).

I paid ~$280 for my (used) Stoeger 8000F with two magazines. The Wilson Combat sights, Beretta oversized magazine release, Wilson Combat hammer, hammer spring, and black nitride finish cost about that much.


r/guns • • 4h ago

Setting up a Backyard shooting range

19 Upvotes

I’ve got a question about what is reasonable behind our house for a shooting range. I’d love to set up a 25yd/50yd range for shooting with my family. Goal is air rifle, pistols, and rifle up to 300blk (308 would be awesome).

We easily have space behind us and the property line is 1/4 mile away with some new growth but dense woods (ours) between us and them.

My idea is to mount low targets so that we aren’t terribly worried about travel beyond since it is pretty flat.

Anyone have any advice or serious safety concerns with that plan?

Thoughts on target types or is a plywood board and paper targets a fine place to start?

I really just want to be able to have some fun and teach my family about gun safety and use.

Edit: got it, berm it is. Got a pile of dirt just waiting to be used.

Edit: or maybe we will stick to air rifles and the stupid public ranges.


r/guns • • 1d ago

300BLK SBR / Dead Air Sandman X / Bering Optics Super Yoter / AS Designs / Geissele

Post image
519 Upvotes

r/guns • • 20h ago

LPVO on the Lever Action

Post image
166 Upvotes

LVPO on the Lever

1-4x sig tango on Smith and Wesson 357. Am hoping to take down my first deer with this exact setup using some high powered heavy ammo in central Texas but damn is this setup heavy. With the can it feels much heavier than a full size mosberg 500 fully loaded.


r/guns • • 18h ago

Staccato HD P4.5 w/ Trijicon SRO

Post image
93 Upvotes

My current Limited Optics pistol in USPSA. Installed a Red Dirt trigger and Wolff safety plunger spring and brought the trigger down to just under 3lbs. I may eventually get a DSC comped barrel for PCSL.


r/guns • • 13h ago

Non AR15 recommendations

15 Upvotes

I am looking to pick up something in 556 that isn't an AR15. I have a few, and am looking to try out something different. This new platform will see a few hundred to a thousand rounds a year, and be mostly a range toy. I've had a Zastava M90 and liked it, but am leaning more towards other options.

Key criteria:

- Reliable

- Takes Stanag or otherwise readily available magazines

- Fun to take out

Would be nice:

- Supressable

- Good parts availability and aftermarket support

What do you recommend? Steyr AUG, Springfield Hellion, Tavor X95, Scar 16s, PSA JAKL, CZ Bren, something else?


r/guns • • 3h ago

Smith & Wesson M&P Sport III Bundle 5.56 NATO 16in Barrel

2 Upvotes

Looking to get this around Black Friday if I can find a good deal or even if I can’t. Looking for anybody’s opinion on this model or any model at a similar price point you’d recommend I look at instead.

Thank you!


r/guns • • 5h ago

Rossi R95 Triple Black (.444 vs. 30-30)

3 Upvotes

Bought one of these chambered in 444 not too long ago. Kicking myself for not just finding something in 30-30. Is it worth finding a trade and taking a hit on the MSRP I bought it at, given the price of the rounds, or should I grow a pair and learn to enjoy the caliber


r/guns • • 4h ago

Otter creek polonium 30 asr bravo question

2 Upvotes

I recently bought a sbr in 300 blk with an asr flash hider already on it and I’ve been wanting to get a suppressor and I’ve heard good things about the otter creek polonium 30. For those of you that own it, is it a good suppressor. Also since I already have an asr flash hider I’m thinking about getting the asr bravo to quickly put on and take off the suppressor and just wanted to see if it was a good mounting system. Also do I need to use rocksett on my flash hider when I install my suppressor? Right now it’s just hand tightened, which is how it came. I know the second part of my question doesn’t necessarily pertain to suppressors, but I figured this would be the best sub Reddit to ask.


r/guns • • 9h ago

Info on a Lee Enfield no4 mk1

5 Upvotes

Got the opportunity to buy a 1943 Enfield no.4 Mk1. Looks well used. Does anyone know anything about what they go for? I dont want to over pay.


r/guns • • 1d ago

Are we still doing wheel gun Wednesday?

Post image
146 Upvotes

r/guns • • 12h ago

Orthos Raider break in question

2 Upvotes

I just recently purchased a orthos raider chiseled elite. I’m new to shotguns for the most part and I’ve never owed a brand new one. When I was doing my research into the gun I saw the break in requirements wanted “heavy, high brass ammunition at 1300 fps or more”. Any suggestion on a good break in ammo for this or does this really have no effect?


r/guns • • 14h ago

Can I, a Montana Resident, sell a rifle in Texas to a Texas Resident via private transfer without an FFL?

2 Upvotes

Hi all, weird situation here. I live in Montana full time but half a decade ago left several longarms in storage at my parents place. I am home visiting for a few weeks and would love to offload them to get some cash. I am aware that I cannot sell a handgun to a private party in a state I am not a resident of, but confused as to the rules regarding longarms. Can I sell these to a private party or do I need to go through an FFL? Thanks


r/guns • • 1d ago

My collection. GOBBLESS

Post image
491 Upvotes

c39v2 AK (Has been used in a Home defense shooting so I can’t get rid of it for the mems) DPMS AR10, Smith and Wesson AR9, Glock19, PS90, Moss500, Beretta 1301


r/guns • • 20h ago

Help with reassemble of the barrel on a centurion BP 12 shotgun.

Post image
4 Upvotes

Can't for the life of me figure out where that washer goes. It came apart so fast I didnt see where it came from. It doesnt go behind the piston because there is supposed to be a gap there. It shouldnt go behind either of the locking nuts. It doesnt go behind the spring or the bolt can't go back in. I watched 3 different videos and none of them even had this washer as far as I can tell. Its not shown on the diagram in the manual either. Anyone with experience with disassembly of this cursed gun, your help would be much appreciated.


r/guns • • 2d ago

Reminder to pack your gun parts better this holiday season 🗣️

Post image
2.1k Upvotes

r/guns • • 5h ago

(TX) Is it possible to legally obtain 9mm ammo under 21?

0 Upvotes

I’m soon turning 20, I’ve purchased a handgun through a private sale not realizing that you must be 21 to buy 9mm from any online or FFL dealer. I figured that the land of the free would be free, but it is not. Did I just make a very stupid mistake?


r/guns • • 1d ago

New gun, who dis?

Post image
108 Upvotes

Got my new EDC today. Waiting for plates to mount an optic. Walther PDP F-Series Pro-X PMM. Had the Canik Prime and loved it. Now time to try what the Canik Prime wanted to copy.


r/guns • • 1d ago

Restored one of my dream guns

Post image
61 Upvotes

I recently bought an H&R 176 10 gauge with a 36” barrel. I’ve had my eyes out for one since I was 16. I gave it a nice makeover.


r/guns • • 15h ago

Buffer removal.

1 Upvotes

So I’ve gotten a brand new lower from PSA, I’m currently trying to change the buffer.
The only problem is even when using an armorer’s wrench (A super cheap one off of Amazon) I can’t seem to get it off.
Does anyone have any tips on what I could go to get it off? I tried just turning as hard as I could with the wrench but the thing doesn’t move like not even a little bit.