r/hardwarehacking • u/sativalius • 14h ago
r/hardwarehacking • u/potatomolehill • 1h ago
Attempting to emulate Microsoft Mediaroom from an AT&T Uverse box
reddit.comSo I've been at this since 2024. It all started with Dish and DirecTV, but I quickly grew bored, what can i say, beyond recovering the recordings there’s not much exciting about satellite boxes beyond the fact that they run on MIPS, Linux, and VxWorks.
The whole "install a desktop os the boxes and make the worlds most cursed file server!" idea quickly backfired because i realized the bootloader is almost certainly locked, the nand is ancient, the hdd's are even older, and it runs at the speed of smell with the RTOS's or linux distro that's on it already. (interestingly enough directv and dish appear to use GPT, as you can slap in 2TB + drive and it'll happily format on the fly (this is an assumption based off of observed behavior)
Regardless,
You might be wondering, why bother with a middleware platform that’s been sold and sunset twice? The honest answer: curiosity and boredom. I wanted to tackle something completely absurd. Seeing the Sonic POS and McDonald’s POS systems running on consumer hardware was both fascinating and hilarious. I boldly assumed, “Sure, just recreate the processor in C# how hard could it be?” After all, VMware, VirtualBox, QEMU, and Bochs do similar things.
What began as a simple shim to run the software on Windows led me to discover MIPS... specifically the R4000 and BCM MIPS 5000 (If its not mips it wont flips 😂). And now, here I am, asking for help on something utterly cursed, certain that many of you have encountered even stranger projects, like running Doom on a light bulb or a receipt printer. Either way, I’ve hit a wall.
(I got another one, if its MIPS it Ships!.)
If you made it this far, congrats and welcome aboard to the "Why, why ,why, WHY?!" ship.
r/hardwarehacking • u/elliottcg0 • 1d ago
PCB Serial Killer Returns! 🔧
Still at it! For anyone who remembers my original Lymow posts, I’ve made some pretty big upgrades since then. Not just to my setup, but to my knowledge of what the hell I’m actually doing. 😂
My latest creation is an ODROID M1 running Linux, with a custom app I built called Desk Detective that I use from my iPad. It’s basically turned into my portable electronics investigation lab. I can plug just about anything into it, monitor what’s happening, capture data, investigate hardware, and generally get myself into trouble.
The whole setup runs off a Milwaukee battery. The M1 is literally superglued to the side of a Netgear router that I flashed with OpenWrt and connected to the system. Nothing says professional engineering quite like superglue and a power tool battery.
I’ve also got a little Raspberry Pi Pico I’m calling the Desk Dog, which I’m turning into a multipurpose probe for investigating boards, signals, and whatever else I decide needs investigating. Mostly because I broke my Waveshare while screwing around with it. Apparently that’s how new tools get invented around here.
The Lymow mower that originally brought me to Reddit is actually doing great. I’ve learned a ridiculous amount from tearing into that thing, and now it’s running my custom software with mapping, navigation, and docking coming along nicely.
I also bought a cheap oscilloscope, immediately took it apart, and started figuring out how to integrate an ESP32 so I could give it some AI-controlled features through desk detective. That one’s temporarily on the shelf while I work on the other dozen projects I’ve started.
I’m still not an engineer by trade. Just a guy who got curious about how things work and apparently has absolutely no self-control when it comes to taking electronics apart.
At this point, anything with a computer chip inside it that looks at me the wrong way is probably getting opened up.
The PCB Killer is still alive. The survival rate of the electronics is improving, though. 😂
r/hardwarehacking • u/ChunkyLover57- • 13h ago
Is this latitude 5300 WWAN capable of being converted into a SSD input
I am on a dell latitude 5300 and did not have this option from the factory. Ai told me that theres no power because its not detectable etc. im running linuxmint btw. In my bios there is the option to enable it. Not sure what to do.
I was told there’s a severe hardware limitation, but it communicates with the computer and nevertheless it should be able to be repurposed.
I’m not opposed to taking it to a shop and having them add something I just don’t know where to start
“Slapped an M.2 2230 NVMe drive into the WWAN slot on a Latitude 5300.
Bullet Checked the BIOS: AHCI was already on, both SATA-2 and M.2 PCIe SSD-0 were enabled, and tested toggling WWAN/GPS on and off with cold boots.
Bullet Ran lspci -nnk, lsblk, nvme list, and checked dmesg on Linux—only the main NVMe drive (nvme0n1) shows up, and zero PCIe lanes or controllers initialize for the WWAN slot.
Bullet Popped the bottom cover and looked at the board around the WWAN slot—the SMD components and PCIe traces needed for storage were left unpopulated from the factory.”
r/hardwarehacking • u/emirdev_mo • 7h ago
I built an open-source tool that turns a USB capture of a Windows-only gadget into a protocol report and a Linux driver
I kept buying hardware (case LCDs, RGB controllers, fan hubs) that only works with a Windows vendor app, and doing the same reverse engineering by hand every time: capture with USBPcap or usbmon, stare at hex, diff packets, guess which byte is the fan speed and which one is a counter or CRC.
So I built usb-rea to automate the boring part. You capture traffic while you use the vendor app, mark what you did ("set fan to 40%", "set color red"), and it infers the command structure: constant headers, counters, value fields, lookup tables and checksums (it brute-forces common CRC variants). The output is a Markdown protocol report plus a standalone pyusb driver you can run on Linux.
How I checked it without guessing: I run it on public captures of devices whose protocol is already documented. On NZXT Kraken X captures it recovers the same fan command liquidctl sends, byte for byte, and the generated driver builds correct packets for values that never appeared in the capture. There is also a lookup command that checks a VID:PID against about 270 devices that already have an open-source Linux implementation, so you don't redo work someone already did.
It is MIT licensed, pip install usb-rea. It also runs as an MCP server if you want an LLM client to drive the analysis, but the CLI works on its own.
Repo: https://github.com/emirmrkaljevic/usb-rea
Limits, honestly: it is alpha. Linear value fits have to survive a leave-one-out cross-check, otherwise it falls back to a lookup table and says so, and a matching USB ID alone does not prove your unit speaks the same protocol. I would love captures or feedback from devices where it gets things wrong.
r/hardwarehacking • u/ConsequenceThen217 • 4h ago
I reverse-engineered a cheap AI badge so you can put any AI in it
r/hardwarehacking • u/DigitalNexusStudio • 12h ago
TapHook & CrewTalk — two Android utilities we just shipped on Google Play (NFC webhooks + zero-account push-to-talk)
r/hardwarehacking • u/ahmedwalid05 • 12h ago
I bricked my smart ceiling fan, then reverse-engineered it back to life
r/hardwarehacking • u/Personal_Swimmer_419 • 13h ago
Beginner guides?
Ive seen IoTGoat but that isnt necessarily for tv firmware. Still a good start no? My goal is to get root on a streaming box without using publicly known exploits for that device. But i want to learn how to do it online before buying any actual hardware.
Recommendations?
r/hardwarehacking • u/Significant-Leg-3857 • 7h ago
Help
$1$..He2Y7u$/4hOpu/J6s6zFixbzvkDm.
r/hardwarehacking • u/JizwizardVonLazercum • 1d ago
Got a free ex-Menulog POS terminal, made it an HA kiosk, then ported Android 10 to it so the current HA app runs (receipt printer works from HA)
galleryr/hardwarehacking • u/AbleMonster • 1d ago
Follow-up: I released an open-source firmware patcher for the Shelly TRV Gen1 after reverse-engineering its power management
Hi everyone,
A few weeks ago, I shared my reverse-engineering investigation into the severe battery-drain problem affecting the original Shelly TRV Gen1 (SHTRV-01).
Original investigation:
https://www.reddit.com/r/hardwarehacking/comments/1xd4a6k/
At that point, I was investigating several firmware-level issues involving Wi-Fi power management, Beacon Recovery, sleep-state handling, and the interaction between the EFM32GG11 MCU and the Silicon Labs WF200 Wi-Fi chip.
Since then, the project has progressed quite a bit.
I’ve now released an open-source Python firmware patcher (v2.0) that reconstructs an experimental B2.2 Beta firmware from the original Shelly 2.2.4 firmware.
GitHub repository:
https://github.com/AbleMonster/Shelly-TRV-Gen1-2.2.4-patcher
What changed since my previous post?
The earlier experimental firmware builds were primarily intended to isolate individual problems.
One important finding was that correcting the recurring Beacon-Recovery loop alone did not eliminate the historical battery drain.
I also discovered that one of my own early power-management patches introduced a regression involving temporary power-state overrides. That was corrected in A1R.
The current B2.2 Beta is a more comprehensive integration of nine selected and individually qualified firmware corrections.
The nine integrated corrections
A1R – Host power management
Corrections involving the lifecycle of power-management requests, including timeout handling, completion races, cleanup, and temporary state overrides.
C-C – Beacon-Recovery logic
Corrections to the interpretation and validity of the measurements used to trigger Beacon Recovery.
Unlike my first experimental patch, this does not simply disable the recovery mechanism.
B2 – Sleep-inhibit reference counting
Bounded synchronization of shared sleep-blocker counters to prevent race conditions that could leave phantom contributions or remove legitimate ones.
MQTT PUBLISH guard
A narrowly scoped input-validation correction for a separately investigated malformed-input failure.
WF200 3.18.0
Integration of the official Silicon Labs WF200 3.18.0 radio firmware while retaining Shelly’s existing FMAC 3.7.0 host-side integration.
Calibration Restore Guard
Prevents a successfully completed calibration-restore operation from unintentionally scheduling itself again.
P01 – Battery ADC
Corrects incomplete resource cleanup after an ADC timeout.
P02 – I²C
Adds bounded cleanup for an unfinished synchronous I²C transaction following a timeout.
P03 – WLAN GPIO
Corrects an interrupt-mask error in the Wi-Fi GPIO notification handling.
These are firmware defects or implementation issues identified through reverse engineering and targeted qualification.
However, I cannot claim that every correction contributes directly to reducing battery consumption. Their individual electrical impact has not been isolated.
The firmware patcher
One challenge was making the experimental corrections reproducible without distributing modified proprietary firmware binaries.
The result is a Python-based binary patcher.
It accepts only the exact original Shelly TRV Gen1 firmware build:
20240619-130912/v2.2.4@ee290818
The patcher:
- Verifies the original firmware using SHA-256.
- Checks the expected binary structure.
- Applies the selected corrections.
- Reconstructs the modified ARM application.
- Rebuilds the OTA-compatible GBL package.
- Verifies the resulting firmware against qualified reference hashes.
- Rejects unsupported or unexpected input firmware.
The generated application and GBL have been verified byte-for-byte against the qualified B2.2 reference artifacts.
The patcher passed its existing 18 automated regression tests.
A local HTTP OTA server is also included.
No original or modified Shelly firmware binaries are distributed in the repository.
The entire reconstruction process happens locally using the user’s own original firmware.
Technical documentation:
https://github.com/AbleMonster/Shelly-TRV-Gen1-2.2.4-patcher/blob/main/docs/technical-details.md
Physical hardware testing
The current B2.2 Beta has been running on six physical Shelly TRV Gen1 devices since November 2, 2026.
The published evaluation from November 16 covers more than 13 days.
For comparison, historical Stock firmware measurements showed multiple devices dropping from approximately 95% to 0% reported battery level in around six days.
That complete rapid-depletion pattern has not recurred in the regular B2.2 test fleet during the first 13+ days.
Four devices with comparable battery-voltage histories showed relatively gradual declines in the long-term comparison.
Two unusually low voltage readings were separately documented and provisionally excluded from the comparison graph.
One subsequently recovered. The other remains under observation.
A separate TRV still running original Stock 2.2.4 firmware continues to show recurring Beacon-Recovery activity, approximately once per minute.
In the available B2.2 observations, there is no comparable persistent recovery loop.
However, I want to be careful about interpreting these results.
This is not a simultaneous, fully matched A/B test. Battery voltage is not a direct measurement of consumed energy or remaining battery capacity.
The results are encouraging, but they do not establish a quantified battery-life improvement or prove the definitive root cause of the original drain.
Long-term battery report:
The next problem: unexpected resets
While the initial battery behavior looks promising, the B2.2 firmware has revealed another issue that I am currently investigating.
Several test devices have experienced unexpected automatic restarts.
Some also showed unusually large increases in their firmware reboot counters.
I reverse-engineered the relevant counter implementation and found that the counter values cannot simply be interpreted as a corresponding number of independently confirmed physical resets.
The cause remains unknown.
I have been investigating:
- Reset and exception handling
- Watchdog configuration and execution paths
- WLAN mutex and SDIO timeout behavior
- Early boot execution
- EFM32 reset-cause registers
- Retained SRAM
- Main stack pointer initialization and reserved memory
The current research has progressed to an isolated early-boot diagnostic Observer prototype.
The idea is to capture the raw hardware reset-cause register before normal startup code potentially modifies the evidence, preserve the result in a small integrity-checked diagnostic record, and make that record readable through the firmware’s diagnostics.
Initial ARM Thumb instruction-level tests have been successful, but the complete Observer is not yet qualified for physical deployment.
No diagnostic firmware has been flashed to the existing test fleet.
The reset root cause is still unknown.
This is documented in GitHub Issue #2:
https://github.com/AbleMonster/Shelly-TRV-Gen1-2.2.4-patcher/issues/2
Why I’m sharing this
I wanted to follow up on my previous post now that the work has progressed from isolated experimental patches to a reproducible, open-source firmware patcher.
B2.2 is still beta firmware, and the unresolved automatic restarts mean I do not consider it suitable for installations requiring uninterrupted thermostat operation.
I’m particularly interested in feedback from people experienced with:
- ARM Cortex-M / Thumb firmware binary patching
- EFM32GG11 reset-cause handling
- Retained SRAM across reset and low-power states
- Early boot instrumentation without source code
- Reliable fault diagnosis in battery-powered embedded systems
If anyone has worked on similar problems, especially capturing trustworthy reset-cause evidence on Silicon Labs EFM32 devices without interfering with normal startup, I’d be interested in your experiences.
GitHub:
https://github.com/AbleMonster/Shelly-TRV-Gen1-2.2.4-patcher
This is an independent reverse-engineering project, not an official Shelly firmware release.
I will continue documenting the findings, including negative test results and unresolved issues.
r/hardwarehacking • u/quantum-error • 1d ago
Need raw modem/fsg & system/recoveryfs dump (or _encrypted4.bin AES key) for Jio AirFiber ODU JODU51741 (RG520F-JO)
reddit.comr/hardwarehacking • u/InternationalAir2917 • 1d ago
Feeling like I'm not making the most of the resources I've been given as a security researcher. What would you do in my position?
Security researchers, what would you do if you had access to powerful computing infrastructure?
I'm an early-career security researcher with access to fairly powerful hardware through work.
My current resources include:
- A dedicated AI inference machine with 128 GB unified memory.
- A high-end workstation with 128 GB RAM and several terabytes of storage.
- A Linux laptop for development and remote access.
- Premium AI subscriptions and access to privately hosted LLMs.
- Various physical devices for security testing.
I work across vulnerability research, reverse engineering, embedded security and research automation.
Lately, I've been wondering whether I'm making the best use of these resources. I feel someone with more experience could potentially accomplish much more with the same setup.
r/hardwarehacking • u/NoDrive96 • 1d ago
Fiberhome hg6243c
I have this fk fibre home fibre optique with lilited interface inead the superadmin i have open it and tried to read uart but impossible to. Reda any think 0 delay and keyboard blocked
r/hardwarehacking • u/ValentinO1052 • 1d ago
Wimius Projector firmware
Hi all,
I have a Wimius P61 projector (made by Yaber Technologies) and I’m trying to update its firmware over USB. The projector has a USB update option, but it always says “can’t detect software file”.
Details:
Model: Wimius P61
Current firmware: P61-6710W-2.69:230224
FCC ID: 2A4K9-U5 (Yaber)
Has built-in 2.4/5G Wi-Fi screen mirroring and Bluetooth
What I’ve tried:
A 16 GB FAT32 stick, which the projector reads fine (the media player shows files)
About 1,500 common update file names (update.bin, upgrade.bin, MstarUpgrade.bin, P61-6710W.bin and more), both on the top level of the stick and inside folders like update/ and upgrade/
Emailing Wimius support. No reply after more than a week
Questions:
Does anyone have a firmware/update file for the P61 or another projector with a 6710W version string? Even an older version helps.
Does anyone know the exact file name or folder the update menu looks for?
Has anyone had luck getting firmware from Yaber or Wimius support, and who did you contact?
Thanks!
r/hardwarehacking • u/bulbaczzPL • 1d ago
TEXA - VW DATA PLUG - Posible hacking using AI with REA Skills?
galleryr/hardwarehacking • u/ManyKey6161 • 2d ago
Rostelecom firmware
Hi everyone! Can someone please help me to open Rostelecom firmware for SWITRON-IPTV-1500? So I can get root access.Any help would be appreciated!😉
r/hardwarehacking • u/WDS143 • 3d ago
Anybody has any idea on how to extract the firmware on this thing t800 ultra 2 logicboard
r/hardwarehacking • u/Common-Parfait3274 • 1d ago
PREGUNTA PARA EXPERTOS EN TELEGRAM: Alguien me acosa, y además puede adivinar las cuentas diferentes que uso en diferentes grupos. No sé si usan bots para saber la ID de las personas o hay otro truco o aplicación para saber si una persona usa varias cuentas; lo que sí sé seguro es que las aciertas.
Y cuando digo que me acosa, es que entra en mis grupos acosándome con sus varias cuentas porque yo lo sé... Mi pregunta es: ¿qué aplicación o qué cómo adivinar esto? Porque tiene que haber algo, ¿es a través de iPhone? Solo uso Android, ¿es que en iPhone aparece buscar gente de cerca y así dar con las multicuentas? He leído en foros de hackers y he escuchado que hay muchas maneras de saber o averiguar lo que estoy diciendo, pero el más interesante se me hace una eternidad leerlo todo... y otros más... no lo dejan bien claro... ¿Alguien que me ayude? De lo contrario, eliminaré mi cuenta de Telegram y mis grupos... No pienso estar en un lugar donde una persona me ataque con sus miles de cuentas. Gracias.
r/hardwarehacking • u/Altruistic-Round-947 • 3d ago