r/hardwarehacking • u/sativalius • 14h ago
r/hardwarehacking • u/ChunkyLover57- • 13h ago
Is this latitude 5300 WWAN capable of being converted into a SSD input
I am on a dell latitude 5300 and did not have this option from the factory. Ai told me that theres no power because its not detectable etc. im running linuxmint btw. In my bios there is the option to enable it. Not sure what to do.
I was told there’s a severe hardware limitation, but it communicates with the computer and nevertheless it should be able to be repurposed.
I’m not opposed to taking it to a shop and having them add something I just don’t know where to start
“Slapped an M.2 2230 NVMe drive into the WWAN slot on a Latitude 5300.
Bullet Checked the BIOS: AHCI was already on, both SATA-2 and M.2 PCIe SSD-0 were enabled, and tested toggling WWAN/GPS on and off with cold boots.
Bullet Ran lspci -nnk, lsblk, nvme list, and checked dmesg on Linux—only the main NVMe drive (nvme0n1) shows up, and zero PCIe lanes or controllers initialize for the WWAN slot.
Bullet Popped the bottom cover and looked at the board around the WWAN slot—the SMD components and PCIe traces needed for storage were left unpopulated from the factory.”
r/hardwarehacking • u/potatomolehill • 1h ago
Attempting to emulate Microsoft Mediaroom from an AT&T Uverse box
reddit.comSo I've been at this since 2024. It all started with Dish and DirecTV, but I quickly grew bored, what can i say, beyond recovering the recordings there’s not much exciting about satellite boxes beyond the fact that they run on MIPS, Linux, and VxWorks.
The whole "install a desktop os the boxes and make the worlds most cursed file server!" idea quickly backfired because i realized the bootloader is almost certainly locked, the nand is ancient, the hdd's are even older, and it runs at the speed of smell with the RTOS's or linux distro that's on it already. (interestingly enough directv and dish appear to use GPT, as you can slap in 2TB + drive and it'll happily format on the fly (this is an assumption based off of observed behavior)
Regardless,
You might be wondering, why bother with a middleware platform that’s been sold and sunset twice? The honest answer: curiosity and boredom. I wanted to tackle something completely absurd. Seeing the Sonic POS and McDonald’s POS systems running on consumer hardware was both fascinating and hilarious. I boldly assumed, “Sure, just recreate the processor in C# how hard could it be?” After all, VMware, VirtualBox, QEMU, and Bochs do similar things.
What began as a simple shim to run the software on Windows led me to discover MIPS... specifically the R4000 and BCM MIPS 5000 (If its not mips it wont flips 😂). And now, here I am, asking for help on something utterly cursed, certain that many of you have encountered even stranger projects, like running Doom on a light bulb or a receipt printer. Either way, I’ve hit a wall.
(I got another one, if its MIPS it Ships!.)
If you made it this far, congrats and welcome aboard to the "Why, why ,why, WHY?!" ship.
r/hardwarehacking • u/emirdev_mo • 7h ago
I built an open-source tool that turns a USB capture of a Windows-only gadget into a protocol report and a Linux driver
I kept buying hardware (case LCDs, RGB controllers, fan hubs) that only works with a Windows vendor app, and doing the same reverse engineering by hand every time: capture with USBPcap or usbmon, stare at hex, diff packets, guess which byte is the fan speed and which one is a counter or CRC.
So I built usb-rea to automate the boring part. You capture traffic while you use the vendor app, mark what you did ("set fan to 40%", "set color red"), and it infers the command structure: constant headers, counters, value fields, lookup tables and checksums (it brute-forces common CRC variants). The output is a Markdown protocol report plus a standalone pyusb driver you can run on Linux.
How I checked it without guessing: I run it on public captures of devices whose protocol is already documented. On NZXT Kraken X captures it recovers the same fan command liquidctl sends, byte for byte, and the generated driver builds correct packets for values that never appeared in the capture. There is also a lookup command that checks a VID:PID against about 270 devices that already have an open-source Linux implementation, so you don't redo work someone already did.
It is MIT licensed, pip install usb-rea. It also runs as an MCP server if you want an LLM client to drive the analysis, but the CLI works on its own.
Repo: https://github.com/emirmrkaljevic/usb-rea
Limits, honestly: it is alpha. Linear value fits have to survive a leave-one-out cross-check, otherwise it falls back to a lookup table and says so, and a matching USB ID alone does not prove your unit speaks the same protocol. I would love captures or feedback from devices where it gets things wrong.
r/hardwarehacking • u/DigitalNexusStudio • 12h ago
TapHook & CrewTalk — two Android utilities we just shipped on Google Play (NFC webhooks + zero-account push-to-talk)
r/hardwarehacking • u/Personal_Swimmer_419 • 14h ago
Beginner guides?
Ive seen IoTGoat but that isnt necessarily for tv firmware. Still a good start no? My goal is to get root on a streaming box without using publicly known exploits for that device. But i want to learn how to do it online before buying any actual hardware.
Recommendations?
r/hardwarehacking • u/ahmedwalid05 • 12h ago
I bricked my smart ceiling fan, then reverse-engineered it back to life