r/networking • • 5d ago

Blogpost Friday Blog/Project Post Friday!

7 Upvotes

It's Read-only Friday! It is time to put your feet up, pour a nice dram and look through some of our member's new and shiny blog posts and projects.

Feel free to submit your blog post or personal project and as well a nice description to this thread.

Note: This post is created at 00:00 UTC. It may not be Friday where you are in the world, no need to comment on it.


r/networking • • 22h ago

Rant Wednesday!

6 Upvotes

It's Wednesday! Time to get that crap that's been bugging you off your chest! In the interests of spicing things up a bit around here, we're going to try out a Rant Wednesday thread for you all to vent your frustrations. Feel free to vent about vendors, co-workers, price of scotch or anything else network related.

There is no guiding question to help stir up some rage-feels, feel free to fire at will, ranting about anything and everything that's been pissing you off or getting on your nerves!

Note: This post is created at 00:00 UTC. It may not be Wednesday where you are in the world, no need to comment on it.


r/networking • • 9h ago

Switching Storm Control on Cisco Nexus 9k

18 Upvotes

Hi, we are implementing Storm Control on Cisco Nexus 9k switches in our datacenter.

Like twice a week a port gets error-disabled due to unknown unicasts at random times. Threshold is at 10 percent which should be more than enough.

What can possibly cause such spikes of unnormal traffic? How can I narrow down which systems cause this? Connected ports are FortiGate firewalls most of the time. Thanks.


r/networking • • 16h ago

Career Advice 5.5 Years in Networking, but Interview Preparation Feels Never-Ending

49 Upvotes

I've been applying for Network and Network Security roles, and honestly, the preparation is starting to feel overwhelming. Even with 5.5 years of experience as a Network Engineer, I feel like there's so much I need to revisit and learn in depth.

My core knowledge is around CCNA-level networking, along with hands-on experience in monitoring, device upgrades, troubleshooting, incident response, resolving network issues, and Python scripting. I've primarily worked with Cisco devices. Although we have Juniper and Palo Alto devices in our environment, my exposure to them is quite limited, so I'm trying to build my knowledge of these vendors as well.

To be honest, I also feel my technical knowledge has become somewhat stagnant. My day-to-day work has mostly involved using a familiar set of commands for monitoring, troubleshooting, and fixing recurring issues. I've become comfortable with what I do at work, but I haven't really pushed myself to explore these areas beyond what my role requires. I know I share some responsibility for that, and I'm now trying to fill those gaps.

Currently, I'm focusing on topics like IPsec, VPNs, Palo Alto firewalls, Cisco SDA, and advanced concepts in BGP and OSPF.

The biggest challenge is the sheer number of skills mentioned in JDs. There's wireless, firewalls, security, automation, VPNs, AWS and so much more. It's difficult to prepare everything at once.

What's even more frustrating is the depth of questions being asked. Sometimes I feel I've learned enough to confidently crack an interview, but when I face technical questions, I realize I've only scratched the surface. Every topic seems to have multiple layers, and there's always something more to explore.

Interviewers are going quite deep even in the first round itself, which leaves me wondering what to expect in the remaining rounds, especially when there are at least four rounds in the process. I'm also unsure how much depth I should aim for in each topic without spreading myself too thin.

I know I have practical experience, but bridging the gap between what I've been doing at work and the technical depth expected in interviews has been quite challenging.

At this point, I'm struggling to figure out how to approach preparation effectively without feeling like I need to know everything about everything and as well I'm confident I can perform well if I'm hired. I have hands-on experience, understand production environments, and can troubleshoot and handle day-to-day network responsibilities. But the interview process is exhausting because it feels like I need to know every aspect of networking in extreme depth just to prove that I'm capable of doing the job.

TL;DR: I have 5.5 years of hands-on networking experience, primarily with Cisco, but feel my technical knowledge has become stagnant due to the repetitive nature of my day-to-day work. I'm now trying to bridge gaps across networking, security, and automation, but the sheer breadth and depth expected in interviews is overwhelming. I'm confident I can do the job if hired; it's the exhaustive interview process, with multiple rounds of deep technical questioning, that's becoming challenging.


r/networking • • 45m ago

Design Small, Non-Profit Network Recommendations

• Upvotes

Hi all

I was laid-off a few months ago, and a professional colleague has given me an opportunity to build a proposal to install a network for a non-profit development project.

It's a 33,000 sq ft facility to provide temporary and transitional housing for homeless, especially those who need follow-up medical care (eg, you're homeless, you go to the ER and get stitches or a surgery and shouldn't be out on the streets while trying to heal and get follow-up care). There are approx 30 users/devices (across staff and residents) on the network, plus some visitors using guest WiFi.

My biggest challenge is that I haven't done this kind of work in a while. My career focus moved from Corp IT to IaaS, before transitioning into Product Management, so I'm not up-to-date with current hardware. Similarly, I don't have the current vendor/reseller relationships to lean on for hardware specs and use case support for producing an initial proposal.

Ultimately, I need some guidance to use as a starting point for research as I build out the initial design and BOM for their RFP; then I can get vendors/VARs/etc involved with the actual site validation, design review, and pricing exercises.

Budget allowance is around $50k USD for all the hardware, software, cabling, any subcontractors, and for me to manage and/or do the work.

The RFP covers three major domain areas:

  1. core network infrastructure - cabling, router/security appliance, WiFI, VoIP phones, and any supporting services (eg, URL content filtering, WiFi authentication and captive portals)
  2. client access devices - "thin client" PCs, tablets and other mobile devices, endpoint security, printers
  3. physical security - IP cameras, doorway access controls, IP cameras and video monitoring/retention, and panic/call buttons, but no burglar alarm/third-party emergency monitoring.

They're renovating an existing building, so a lot of infrastructure already exists, though I'll be expected to not assume reuse until testing and validation. They already have a network closet with two-post rack and existing CAT-5e, for example.

They have two ISPs (gigabit fiber, I think) intended to be configured for active/failover configuration.

There are around 25 wireless devices for staff and residents (mixture of thin client PCs, tablets, and laptops), accessing Internet for general browsing and telehealth appointments (residents) and business applications (o365 + SaaS apps for the staff). The RFP specifies 6 wireless access points, though I'll be validating this before a final design is presented. Also, the RFP specifies "thin clients running cloud-based applications", so I'm guessing some sort of mini PC or similar device running o365 and SaaS app, in addition to limited web browsing and one Telehealth machine.).

There are about 50 wired devices, like security cameras, wall-mounted panic/call buttons, and physical access controls (keycard entry systems), plus four thin client PCs for staff. They have existing wiring for some of this (they're converting an old retirement home), though I'll have to verify the wiring.

The existing network cabling is CAT-5e (needs testing and validation), and would work for their wired devices, though I would consider pulling new CAT-6/6e for wifi access points if recommended. I know a commercial electrician that does a lot of low-voltage side work for me, so I have access to cabling resources to help if anything new needs to be pulled (eg, CAT-6 for AP, two-wire panic buttons, etc).

Since I didn't have to design corporate WiFi access back in my day, I've been reviewing Cisco's WiFi content to get some starting points (eg, docs like this one) to get a better understanding around AP sizing based on the use case and assess density areas. Unfortunately, this content is a few years old now. Any pointers to useful (and free) sizing guides or tools are welcome.

The RFP included some high-level building design layouts with markups to show locations of doorway access, required field-of-view for cameras, and the placement of fixed-location PCs in a common area (no individual PCs are expected in resident rooms). There's a higher density of WiFi devices in a central area that I need to account for, while the edges of the building would likely only have a few devices at any given time (eg, a staff nurse with a tablet visiting a resident's room). If there's already cabling in the locations for the common areas, I'd likely recommend using those existing ports to reduce WiFi burden, as the current intent is to only use six data drops for staff PCs and printers.

--

Ultimately, this project isn't out of reach for me, but I just don't have current hardware experience and knowledge to make a confident recommendation, and will need to involve some local subcontractors and vendors to help with validating the proposal. I'd like to have an idea of what gear to consider before getting new vendors/subcontractors involved. Feel free to disregard anything out of scope for this sub, eg, endpoint security software recommendations probably belong in another sub.

VoIP phones and details come from their service provider. No PBX to manage that I'm aware of. Easy enough. Only need 7 ports for this.

My preference is for the network gear to have a central management system/control plane, so that probably means a single vendor for WiFI access points and PoE switches, and possibly the router appliance.

My general searching (in this sub, and elsewhere) seems to indicate the Cisco Meraki line would work for the network and cameras, and I've worked with Catalyst switches in the distant past. But, this is a non-profit and they're already over budget with construction. I'd rather avoid higher-priced gear and recurring per-device software license fees, wherever possible. But, if the general recommendation is to go this route for reliable small business and network/security management, I'll price it out for them.

My biggest consideration is around wireless access points, as I haven't deployed this in a corp environment. What's the general preference for low-cost gear that supports business use cases, eg, AP roaming, WPA2/3 Enterprise Auth, etc.

For a router/security appliance, I don't have hands-on experience with Cisco PIX (or ASA, or FTD, or whatever it's called now). Any alternative recommendations for router/security appliances? I'm leaning toward Netgate, as I know pfSense pretty well and it would meet a lot of their needs (eg, multiple ISP gateways, URL content filtering and proxy services, VLAN segmentation). What's the general recommendation for something a small business would use to connect to an ISP?

How is Ubiquiti in an environment like this? General consensus seems to indicate it's not really that usable for serious business networking use cases, though that mostly seems to be the opinion of enterprise guys working in datacenters. Ubiquiti is attractive to me because they sell a lot of the physical security devices, too (doorway access systems, IP cameras, push-to-exit buttons, etc, and gives me a nice, unified (and local) management interface. Having a unified management plane for both of these domain areas would be quite helpful to me or whomever has to maintain this, but not at the expense of actual usability, like client networking throughput or WiFi service availability.

If Ubiquiti isn't a viable option, I'll work with a local security vendor separately for the doorway entry, cameras, and panic buttons, though I'm open to system recommendations.

I'm not convinced that Netgear small business stuff would work well enough for switches and access points, but might be the direction if I have to get really creative with meeting their budget.

What else is worth looking into? A lot of the hardware I would consider for an IaaS datacenter environment would be well over-spec and over-budget for something like this. I just need some general recommendations to use as a starting point, and I can work it out from there.

(It's probably out-of-scope for this sub, but any recommendations on physical access security systems and/or endpoint management software are welcome, too.)


r/networking • • 1h ago

Routing AT&T Dedicated Fiber Line Question

• Upvotes

AT&T is installing dedicated fiber at my office with LTE failover using a managed Meraki MX68CW in front of our FortiGate:

Fiber > MX68CW > FortiGate > LAN

I want the FortiGate to remain our primary firewall and handle our existing site-to-site IPsec VPNs. What needs to be configured on the Meraki/FortiGate for the VPNs to continue working, including during LTE failover?

Would appreciate any help with this.


r/networking • • 3h ago

Other Need some advice on reusing construction network for commissioning

1 Upvotes

A 15MW facility completing construction and starting commissioning towards the end of December. Approx 30 WAPs deployed over 200,000 square feet to support construction activity. We would expect the number of simultaneous connections to at least double during commissioning. We'd run into problems with capacity, security (currently wide open) and who owns the assets, given that it's all owned by the General Contractor. This is our 2nd project for us, our initial project was much smaller, so we opted to replace all infrastructure. Any experience continuing with the existing network? Are there firms who can review the installation to determine suitability to continue using?


r/networking • • 11h ago

Troubleshooting GRE through the Palo Alto Firewall

3 Upvotes

I'm completely lost. GRE is working between the two routers. The PAN is some where in the middle. I have a rule set allowing the source and destination addresses of the routers bidirectional. The application and services are set to any. I also have the logs set log at the beginning and end.

The problem is I don't see any traffic logs between the routers going through the firewall. I'm expecting to see the routers IPs and the protocol GRE, but no traffic logs at all except for the routers pings.

I do see the GRE traffic in the Session Browser. The question that I have now is, is this normal behavior in Palo firewalls that the GRE will not show up in the traffic logs?

When I used the Cisco EPC, I do see the GRE payload and if I use the detail option, I could see the encapsulation 47 which it tells me I was looking at the GRE payload.


r/networking • • 7h ago

Other Tips for keeping RJ45 cable from coming loose in port in a high vibration environment?

0 Upvotes

Working in industrial area, some of our field IO are in areas that have a ton of vibrations and RJ45 cables seem to come loose occasionally and in this kind of work it can range from inconvenient to dangerous loss of comms.

Is there any kind of STL or tip to keep the cables from coming loose in their ports?

To be clear, the cables aren't getting damaged at all, the latest culprit was less than a year old and in a shockingly clean cabinet. But it's near some really shaky equipment. We're using switches that don't have much in the way of mounting to attach something to hold them in better either.

Thanks!


r/networking • • 2h ago

Security Any AT&T customers here? We just went thru 3 (Vyatta) routers in a week

0 Upvotes

As the title states. Never had this happen before where we went thru 3 routers in a span of a week! Same make and model, same issue (hd failure).

I’ve been in networking for over a decade and I don’t think I’ve ever seen that kind of anomaly. To add, the tech that we were working with alluded to “the big o*tage” as a possible root cause. Not sure if he was just shooting the shit with us or it’s an actual fact. I know, maybe a little paranoid.


r/networking • • 3h ago

Other How I get accurate syntax from AI for configuring devices via CLI

0 Upvotes

Since AI is everywhere these days and if I'm not using it, it seems I'm falling behind, I though it share a useful trick to get correct syntax for your device's CLI:

Looks like today every manufacturer has its own version of cli commands, and when I ask AI to help me with configuring complex routing or similar on a device that isn't well documented online, I get an answer in which AI sounds like it knows what its doing when in reality I'm getting syntax for some other device!

So after AI gets a general idea of what I'm configuring, I supply general help ("?") output from CLI, on cisco it would look something like this:

SW1(config-if)#ip ?
Interface IP configuration subcommands:
access-group Specify access control for packets
admission Apply Network Admission Control
arp Configure ARP features
auth-proxy Apply authenticaton proxy
ddns Configure dynamic DNS
dhcp Configure DHCP parameters for this interface
flow NetFlow related commands
header-compression IPHC options
igmp IGMP interface commands
rsvp RSVP Interface Commands
rtp RTP parameters
verify verify

This depends on device I'm using and what I'm trying to configure, but it helps AI supply correct syntax.

Let me know what you think about this.


r/networking • • 2d ago

Wireless How valuable are the CWNP certifications?

14 Upvotes

I currently have the CWNA and CWDP and going to do the CWSP next but I’m wondering if hiring managers see this as something that stands out since many IT people lack wireless skills or do they not really value it at all. Jobs I’m targeting are network engineer, network admin, wireless engineer, network technician. I know experience trumps all but I’m just wondering about this from a pure certification perspective.


r/networking • • 2d ago

Design VPN router for Operational Technology

6 Upvotes

We have some older routers that exist inside our isolated VLANs that are used by our vendors. The problem is, vendors do not maintain licenses, update them, or really support them.

The vendors need the routers as they use them to drop into VPNs on them to access their equipment and support them. I am getting the green light by these vendors to replace them with our own solution. It fells wrong to just dump them onto our primary routers where I would have to enable VPN users (we don't use such vpns). I also don't want to use a more modern vpn solution, since I would be on the hook for licensing the per user costs.

Anyone have recommendations for a setup here? Majority of these will be in PLC cabinets, so they have access to 24v and a DIN rail. But they all have 120v otherwise and just standard cat5 cables going to them.

Thanks


r/networking • • 2d ago

Wireless Help With External Antennas for Wireless Bridges

6 Upvotes

We recently migrated from legacy Extreme AP7662 and AP360E units to Juniper AP63Es to serve as a 5GHz wireless mesh connecting three remote sites back to our main location.

Since the cutover, the RSSI values reported in Mist across all three links have not been great. The links are mostly stable, only having issues sometimes when it rains hard, but I think they should be better.

Remote Site Distance Current RSSI
Site A ~300 m -82 dBm
Site B ~775 m -76 dBm
Site C ~610 m -84 dBm

Our contractor advised us to reuse the existing external antennas from the Extreme deployment.

The old Extreme antennas only have 2 or 3 N-type connectors (2x2 or 3x3 MIMO), whereas the Juniper AP63E has 4 N-type connectors (4x4 MIMO) plus 2 BLE/sensor ports. As a result, 1 or 2 RF ports on each AP63E are currently unpopulated.

Because the labels on the old antennas have completely worn off, I can't verify their gain, beamwidth, or even whether they are dual-band or strictly 2.4GHz (since Juniper Mist restricts mesh backhaul to 5GHz).

There is some foliage that has grown into the line of sight on at least a couple of these paths over time that I know should be cleaned up regardless.

Given the mismatched antenna connector count, unknown frequency rating, and age of the existing antennas, should my first step be ordering proper 4x4 5GHz directional antennas (and checking Fresnel zone clearance), or are there Mist radio/mesh settings or termination concerns I should troubleshoot first before spending money on new hardware?

Thanks in advance!


r/networking • • 2d ago

Moronic Monday Moronic Monday!

13 Upvotes

It's Monday, you've not yet had coffee and the week ahead is gonna suck. Let's open the floor for a weekly Stupid Questions Thread, so we can all ask those questions we're too embarrassed to ask!

Post your question - stupid or otherwise - here to get an answer. Anyone can post a question and the community as a whole is invited and encouraged to provide an answer. Serious answers are not expected.

Note: This post is created at 01:00 UTC. It may not be Monday where you are in the world, no need to comment on it.


r/networking • • 3d ago

Other Multi-Vendor Network Management, what do you use?

23 Upvotes

Hello All,

This post is mostly to get an idea of what everyone is using to manage your networking device. There was a few posts I've seen in the past about what others use to manage switching in a multi-vendor network but they were dated and I wanted to see if anything in the landscape has changed for you?

Currently I am in an environment with Aruba-OS (Procurves), Aruba CX's, and the occasional Cisco or Forti-switch. We hope to eventually move everything to CX's but that will take its sweet time. Anyways, onto the main point of this post: what do you use to manage an environment with such a mix?

Personally we use Unimus but it has its limitations (Being slow, buggy at times, and close to a one trick pony.) There are the usual suspects like Auvik (if I get one more advertisement for this I will lose it), or Ansible. I use NetConsole on my lab environment and absolutely love it but they don't have the paid version available ATM.

So please let me know what you recommend/use in your environment that helps ease the burden of switch management!


r/networking • • 3d ago

Troubleshooting Feeling pretty burned right now—our "physically diverse" backup DIA circuit just went down with the primary during carrier maintenance

17 Upvotes

I'm typing this half-awake after a 6am Sunday maintenace window so bear with me if my brain is mush. Before anyone asks, yes, "diverse pathing" was supposedly verified on the SOW when our previous admin signed the contract two years ago. We pay around $1,300 a month for a secondary 1G fiber circuit from a totally different ISP so our 250-person office stays online if something gets cut.

Primary carrier sent an emergency maintenance notice for this morning, which honestly felt like a great excuse to test our SD-WAN failover under zero pressure. Six minutes into their window, BOTH circuits drop simultaneously. I spent twenty minutes checking our HA firewalls thinking I broke a BGP peer or something... nope. Turns out the secondary ISP is just reselling Type 2 local loop off the exact same ILEC fiber vault out by the main road.

Feeling kind of foolish that I trusted a two-year-old doc instead of demanding actual KMZ maps earlier, though I couldnt even get the backup carrier's NOC to confirm the underlying LEC on the phone. how do you all actually enforce true physical diversity on mid-sized sites without getting stonewalled? At this point I'm half tempted to tell management to ditch the second fiber and just throw a 5G enterprise gateway on the roof.


r/networking • • 3d ago

Troubleshooting Need help with a routing issue

22 Upvotes

I can't seem to have my vlans route between eachother from my L3 switch to my router.

For preface, I have ip routing enabled already as well as a DHCP pool that hands out IPs accordingly.

my trunk port on the switch has access to the vlan that im using for my wired data.

Wired data is 86. Ip is 192.168.50.200

DHCP is configured with the default-router of .200

Interface is a trunk port for 2 other vlans.

Router has its LAN 1 port set up as a trunk port allowing the 3 vlans. I also added vlans in the routers database.

I add a static route in the switch to allow 60.0 to the forwarding routers ip of 50.200, and in the router I add a route of 50.0 with a gateway of 60.1

I can't ping them and im not quite sure what im missing.

I do have a gateway of last resort on the switch for 0.0.0.0 0.0.0.0 192.168.50.0 setup too.

Am I missing something? Or just have a misconfiguration?


r/networking • • 3d ago

Design Best resources to prepare for Network Design interviews (L2/L3/L4, Scalability, Reliability, Security)?

52 Upvotes

Hello everyone,

I’m currently preparing for Network Design interviews for Network Engineering roles.

I have a solid understanding of networking fundamentals (L2, L3, L4 protocols, routing, switching, BGP, OSPF, TCP/IP, etc.), but I’m looking to improve my ability to tackle complex network design problems.

Specifically, I’m looking for resources (books, videos, guides, or case studies) that walk through:
Real-world network design scenarios covering L2/L3/L4 architecture.

Scalability, reliability, redundancy, high availability, and security considerations.

Design trade-offs and why one architecture is preferred over another.

Common design patterns that can be reused across different network design interview questions.
End-to-end design walkthroughs that demonstrate how to approach a problem from requirements gathering to final architecture.

Ideally, I’d like to study a handful of comprehensive design use cases that cover enough breadth to help me approach unfamiliar network design questions systematically.
Most resources I’ve found focus heavily on individual protocols or traditional system design rather than practical network architecture design.

Has anyone come across good resources or prepared for similar interviews? Would really appreciate any recommendations or experiences!


r/networking • • 3d ago

Wireless HPE6-A90 – ¿Experiencias recientes con el examen y consejos para la preparación?

0 Upvotes

Hola a todos,

Busco opiniones de quienes hayan realizado recientemente el examen HPE6-A90 (HPE Networking Central).

Trabajo habitualmente con entornos Aruba Central y AOS-CX, incluyendo configuración de switches, despliegues inalámbricos, VLAN, resolución de problemas y gestión de redes.

Hace poco intenté el examen HPE6-A90 y me pareció bastante diferente del material de preparación que había estado utilizando.

Muchas preguntas se basaban en escenarios, a menudo presentados como breves tickets de soporte que requerían interpretar una configuración, comprender por qué algo estaba configurado de una manera determinada o identificar el enfoque más adecuado.

También había preguntas relacionadas con la arquitectura AOS-10, la orquestación de túneles (OTO) y otras funcionalidades específicas de Central. Me estoy preparando para volver a presentar el examen y me gustaría saber la experiencia de quienes lo hayan realizado recientemente.

  • ¿Encontraste un formato similar basado en escenarios?
  • ¿Qué recursos de capacitación o laboratorios oficiales de HPE te resultaron más útiles?
  • ¿Has notado algún cambio significativo en el enfoque o la dificultad del examen últimamente?

No busco preguntas del examen, solo comentarios sobre el enfoque actual y recomendaciones para prepararme de manera más efectiva.

¡Gracias de antemano!


r/networking • • 4d ago

Other DIY fiber splicing

37 Upvotes

We just had an accidental fiber break in one of our locations. Thankfully there was a tech on site that knew how to splice and had his equipment with him.

Now I’m wondering if yall do your own splicing. Is it worthwhile to invest in the tools and equipment for it? I know these types of incidents rarely happen. But thinking back on the incident we have; if that happened without the tech there we would’ve been offline at least for hours.


r/networking • • 4d ago

Design CloudFlare One - Reliability and Alternatives?

10 Upvotes

Hiya,

I've got an EOY task to get all corporate traffic on- and off-site behind a WSG or similar. CloudFlare One is free up to 50 seats so great for testing out right now. I was wondering if anyone had experience using it as a posture-only tool on-site and SWG + always-on VPN tunnel off-site, issues with reliability, or any other big downsides. Also wondering if anyone has alternatives that aren't too bad in price and are similarly easy to implement and have VPN+SWG functionality. Currently running low-end Sophos firewalls and they are not candidates for replacement at this time as much as I'd love to move to Fortigates. TIA!


r/networking • • 5d ago

Troubleshooting Intermittent packet loss on one access switch port that disappears when I change the cable

13 Upvotes

I'm dealing with an annoying problem at a small office with about 40 users. One workstation has been reporting random slowdowns and dropped Teams calls for about two weeks. On the switch, I can see occasional input errors and CRC counters incrementing on that port, but they aren't huge numbers, and the link stays up at gigabit speed.

I replaced the patch cable and the issue vanished for two days, then came back. I tried another port on the same switch, and it behaved fine for a day, but now the new port shows a few errors too. Wall jack testing with a basic tester shows everything wired correctly, though I know that doesn't prove quality.

I suspect the cable run inside the wall, maybe near a power line or with a damaged section, but I'd like to verify before pulling a new one. What steps do you take in a case like this? Do you recommend a proper cable certifier, or are there other quick checks that give useful information? I'm also wondering whether duplex or auto-negotiation issues could be involved, since the NIC is older. Any advice would be appreciated, because i'd like to fix it permanently and not keep swapping patch cords.


r/networking • • 4d ago

Switching Command to view the power of a fiber in Alcatel switches

2 Upvotes

I'm just starting to use Alcatel switches, and I need to know the command to check the fiber power.

I'd like to know if anyone could help me with this question.

The models I'm using are:

6850

6860

6450


r/networking • • 5d ago

Routing How do you handle conflicting/stale AS-SET data when auto-generating BGP filters?

17 Upvotes

I work at Inter.link, and most of our peering config is automated now (PeeringDB + IRR -> prefix-lists -> push). The part that still takes manual time isn't the tooling. It's the data going into it.

The pipeline is pretty standard:

Pull the peer's AS-SET and max-prefix values from PeeringDB
Expand the AS-SET against IRR (bgpq4)
Validate and normalise internally
Generate prefix-lists and push

That works until it doesn't. The problem that keeps biting us is AS-SET name collisions. The same name can exist in RADB, ALTDB, RIPE and others, each with different members. Some copies are stale and some are a completely different org's object. Pinning sources with bgpq4 -S helps, but then you need to know which source is right for each peer. The irr_as_set field in PeeringDB often isn't in SOURCE::AS-SET format, so you end up guessing.

The options I can see:

A fixed source priority (RIR databases first, RADB/ALTDB last)
An internal override list per peer
Diffing the expansion against what's actually announced, or against RPKI ROAs, and flagging big deltas
A human looks at it

None of these feel great on their own.

The same problem shows up elsewhere too: max-prefix values in PeeringDB that haven't been touched in years, and RTBH/blackhole communities that are only documented on a webpage or in a PDF (or nowhere) instead of anywhere machine-readable.

Automation actually makes this worse. A bad record used to get caught by whoever was typing the config. Now it lands on every edge router in minutes.

Curious how others deal with it:

Do you mirror IRR/PeeringDB locally or query the public sources directly?
How do you resolve conflicting or stale AS-SETs: source priority, overrides, something smarter?
Do you run automated sanity checks before external data becomes config (prefix count deltas, RPKI cross-checks, etc.)?
Where does the industry most need better data standards? Publishing blackhole communities in a machine-readable way seems like an obvious one to me.

I'm especially interested in hearing from people running multi-AS or multi-region networks.