r/networking • • 14h ago

Career Advice 5.5 Years in Networking, but Interview Preparation Feels Never-Ending

47 Upvotes

I've been applying for Network and Network Security roles, and honestly, the preparation is starting to feel overwhelming. Even with 5.5 years of experience as a Network Engineer, I feel like there's so much I need to revisit and learn in depth.

My core knowledge is around CCNA-level networking, along with hands-on experience in monitoring, device upgrades, troubleshooting, incident response, resolving network issues, and Python scripting. I've primarily worked with Cisco devices. Although we have Juniper and Palo Alto devices in our environment, my exposure to them is quite limited, so I'm trying to build my knowledge of these vendors as well.

To be honest, I also feel my technical knowledge has become somewhat stagnant. My day-to-day work has mostly involved using a familiar set of commands for monitoring, troubleshooting, and fixing recurring issues. I've become comfortable with what I do at work, but I haven't really pushed myself to explore these areas beyond what my role requires. I know I share some responsibility for that, and I'm now trying to fill those gaps.

Currently, I'm focusing on topics like IPsec, VPNs, Palo Alto firewalls, Cisco SDA, and advanced concepts in BGP and OSPF.

The biggest challenge is the sheer number of skills mentioned in JDs. There's wireless, firewalls, security, automation, VPNs, AWS and so much more. It's difficult to prepare everything at once.

What's even more frustrating is the depth of questions being asked. Sometimes I feel I've learned enough to confidently crack an interview, but when I face technical questions, I realize I've only scratched the surface. Every topic seems to have multiple layers, and there's always something more to explore.

Interviewers are going quite deep even in the first round itself, which leaves me wondering what to expect in the remaining rounds, especially when there are at least four rounds in the process. I'm also unsure how much depth I should aim for in each topic without spreading myself too thin.

I know I have practical experience, but bridging the gap between what I've been doing at work and the technical depth expected in interviews has been quite challenging.

At this point, I'm struggling to figure out how to approach preparation effectively without feeling like I need to know everything about everything and as well I'm confident I can perform well if I'm hired. I have hands-on experience, understand production environments, and can troubleshoot and handle day-to-day network responsibilities. But the interview process is exhausting because it feels like I need to know every aspect of networking in extreme depth just to prove that I'm capable of doing the job.

TL;DR: I have 5.5 years of hands-on networking experience, primarily with Cisco, but feel my technical knowledge has become stagnant due to the repetitive nature of my day-to-day work. I'm now trying to bridge gaps across networking, security, and automation, but the sheer breadth and depth expected in interviews is overwhelming. I'm confident I can do the job if hired; it's the exhaustive interview process, with multiple rounds of deep technical questioning, that's becoming challenging.


r/networking • • 7h ago

Switching Storm Control on Cisco Nexus 9k

13 Upvotes

Hi, we are implementing Storm Control on Cisco Nexus 9k switches in our datacenter.

Like twice a week a port gets error-disabled due to unknown unicasts at random times. Threshold is at 10 percent which should be more than enough.

What can possibly cause such spikes of unnormal traffic? How can I narrow down which systems cause this? Connected ports are FortiGate firewalls most of the time. Thanks.


r/networking • • 21h ago

Rant Wednesday!

7 Upvotes

It's Wednesday! Time to get that crap that's been bugging you off your chest! In the interests of spicing things up a bit around here, we're going to try out a Rant Wednesday thread for you all to vent your frustrations. Feel free to vent about vendors, co-workers, price of scotch or anything else network related.

There is no guiding question to help stir up some rage-feels, feel free to fire at will, ranting about anything and everything that's been pissing you off or getting on your nerves!

Note: This post is created at 00:00 UTC. It may not be Wednesday where you are in the world, no need to comment on it.


r/networking • • 9h ago

Troubleshooting GRE through the Palo Alto Firewall

4 Upvotes

I'm completely lost. GRE is working between the two routers. The PAN is some where in the middle. I have a rule set allowing the source and destination addresses of the routers bidirectional. The application and services are set to any. I also have the logs set log at the beginning and end.

The problem is I don't see any traffic logs between the routers going through the firewall. I'm expecting to see the routers IPs and the protocol GRE, but no traffic logs at all except for the routers pings.

I do see the GRE traffic in the Session Browser. The question that I have now is, is this normal behavior in Palo firewalls that the GRE will not show up in the traffic logs?

When I used the Cisco EPC, I do see the GRE payload and if I use the detail option, I could see the encapsulation 47 which it tells me I was looking at the GRE payload.


r/networking • • 19m ago

Routing AT&T Dedicated Fiber Line Question

1 Upvotes

AT&T is installing dedicated fiber at my office with LTE failover using a managed Meraki MX68CW in front of our FortiGate:

Fiber > MX68CW > FortiGate > LAN

I want the FortiGate to remain our primary firewall and handle our existing site-to-site IPsec VPNs. What needs to be configured on the Meraki/FortiGate for the VPNs to continue working, including during LTE failover?

Would appreciate any help with this.


r/networking • • 1h ago

Other Need some advice on reusing construction network for commissioning

1 Upvotes

A 15MW facility completing construction and starting commissioning towards the end of December. Approx 30 WAPs deployed over 200,000 square feet to support construction activity. We would expect the number of simultaneous connections to at least double during commissioning. We'd run into problems with capacity, security (currently wide open) and who owns the assets, given that it's all owned by the General Contractor. This is our 2nd project for us, our initial project was much smaller, so we opted to replace all infrastructure. Any experience continuing with the existing network? Are there firms who can review the installation to determine suitability to continue using?


r/networking • • 6h ago

Other Tips for keeping RJ45 cable from coming loose in port in a high vibration environment?

0 Upvotes

Working in industrial area, some of our field IO are in areas that have a ton of vibrations and RJ45 cables seem to come loose occasionally and in this kind of work it can range from inconvenient to dangerous loss of comms.

Is there any kind of STL or tip to keep the cables from coming loose in their ports?

To be clear, the cables aren't getting damaged at all, the latest culprit was less than a year old and in a shockingly clean cabinet. But it's near some really shaky equipment. We're using switches that don't have much in the way of mounting to attach something to hold them in better either.

Thanks!


r/networking • • 2h ago

Other How I get accurate syntax from AI for configuring devices via CLI

0 Upvotes

Since AI is everywhere these days and if I'm not using it, it seems I'm falling behind, I though it share a useful trick to get correct syntax for your device's CLI:

Looks like today every manufacturer has its own version of cli commands, and when I ask AI to help me with configuring complex routing or similar on a device that isn't well documented online, I get an answer in which AI sounds like it knows what its doing when in reality I'm getting syntax for some other device!

So after AI gets a general idea of what I'm configuring, I supply general help ("?") output from CLI, on cisco it would look something like this:

SW1(config-if)#ip ?
Interface IP configuration subcommands:
access-group Specify access control for packets
admission Apply Network Admission Control
arp Configure ARP features
auth-proxy Apply authenticaton proxy
ddns Configure dynamic DNS
dhcp Configure DHCP parameters for this interface
flow NetFlow related commands
header-compression IPHC options
igmp IGMP interface commands
rsvp RSVP Interface Commands
rtp RTP parameters
verify verify

This depends on device I'm using and what I'm trying to configure, but it helps AI supply correct syntax.

Let me know what you think about this.