r/overclocking • • 8h ago

Swich the old "Crown Jewel" Arctic Silver 5 thermal paste.

Thumbnail
gallery
27 Upvotes

After two years of instaled (upgraded to) my Ryzen 5950x, i decided to change my old Arctic Silver 5 thermal paste to something new, just to see the diference in temperatures, and I moved to the Halnziye HY-P17 Thermal Paste.

After two years of moderate usage, the Arctic Silver 5 maintained juicy like new without loosing any performance with time, i aplyed the HY-P17 in the cpu cooler(DeepCoolAssassin III modified witn 2 140mm Akasa Viper), not in the cpu (was much more easy).

I changed de pc case fans speed from 900rpm to 800rpm and -10% the fans curve of cpu cooler(in bios), even with less airflow for more silence, I had an increase of cooling performance, -3⁰ and -5⁰ in some scenarios (gamming).

Let's see how the HY-P17 will beaves in the next two years, but definitely the Halnziye HY-P17 is amazing, but for longevity for now the Arctic Silver 5 still being a "Crown Jewel".


r/overclocking • • 10h ago

Benchmark Score 9800X3D and 5090 Astral OC Water Blocked

Thumbnail
gallery
6 Upvotes

I got really bored and decided to download MSI Afterburner. Got the beta. Set 5090 to +400 Core "54,499 and then +425 Core. Got a 54,569 topping out at 39C at 580W. Anyone have that XOC Bios lol jk jk

9800X3D will get me 17,300 to 17,500 roughly.

Took 37th currently for the leaderboard in TimeSpy. I'll do Port Royal and TimeSpy Extreme tomorrow.

No voltage increase, nothing else. Just Memory & Core.


r/overclocking • • 5h ago

Silicon power 64gb ddr5 a die or m die Hynix?

Thumbnail
gallery
2 Upvotes

Have these silicon power 64gb

Unsure if a die or m die Hynix

Any way to tell?


r/overclocking • • 5h ago

OC Report - RAM funny ram

Thumbnail
gallery
2 Upvotes

G.Skill Aegis was the cheapest ram 2x16gb sticks when i got them. 1000MT/s overspec, didnt use testmem5 because last maintained like, 2020, and a slight nightmare to get (tested with y-cruncher VT3 + FFTv4 (1hr each, 0 WHEA) instead of TM5). (got a Hynix DJR silicon lottery W by chance) (im running BOINC tasks in the background, not during tests obviously). power down enabled was actually the setting that made it work (and t1 command rate or gear down mode just crash things in this case). i didnt go past 1.41 or 1.42v because i dont want the bare die to get too hot. though to be fair its barely warmer than usual, maybe up to 1.44v couldve been attainable.


r/overclocking • • 2h ago

Help Request - CPU Undervolting the 14900ks

0 Upvotes

If my goal is to make the chip last longer while getting good performance is it reasonable to undervolt the cpu, underclock it, apply a massive negative offset of something like -140mv

I understand this will cause crashing because the voltage will drop to low. What if we counter this by messing with the load line. Either tightening the load line or loosening it


r/overclocking • • 2h ago

Problemas de estabilidad con DDR5-6000 EXPO en Ryzen 7 9800X3D + ASUS B650

0 Upvotes

Hola, necesito ayuda con un problema de estabilidad de memoria RAM que comenzó después de actualizar mi procesador y la BIOS.

Especificaciones de mi PC:

  • CPU: AMD Ryzen 7 9800X3D (anteriormente Ryzen 7 9700X).
  • Placa madre: ASUS TUF GAMING B650-PLUS WIFI.
  • BIOS: Versión 4004.
  • RAM: 64 GB (2×32 GB) T-FORCE Delta DDR5-6000 CL38, Dual Rank, chips SK Hynix.
  • Perfil EXPO: 6000 MT/s, 38-38-38-78, 1.35 V.
  • GPU: NVIDIA RTX 5070.
  • Fuente: Corsair 850 W 80+ Gold.

Descripción del problema:

Después de cambiar mi Ryzen 7 9700X por un Ryzen 7 9800X3D y actualizar la BIOS, comencé a tener problemas de arranque y estabilidad al activar EXPO a 6000 MT/s.

La placa permanece bastante tiempo con el LED naranja de DRAM encendido, algunas veces tarda varios minutos en dar imagen y otras veces muestra el mensaje:

“The system has POSTed in safe mode because of system instability.”

Pruebas realizadas:

  1. DDR5-6000 CL38 (EXPO on the fly): Windows consigue iniciar, pero OCCT Memory detectó aproximadamente 1.238 errores en apenas 50 segundos.
  2. DDR5-6000 CL38 (EXPO I): Fallo de POST y recuperación automática de la BIOS.
  3. DDR5-6000 CL40 (timings relajados): También presentó fallo de POST.
  4. DDR5-4800 CL40 (Auto): OCCT Memory durante 5 minutos, 0 errores.
  5. DDR5-5600 CL40 (40-40-40-84): Arranque exitoso y OCCT Memory durante 10 minutos, 0 errores.

Los dos módulos pertenecen al mismo kit de 64 GB y están instalados en los slots A2 y B2.

Mi objetivo:

Conseguir que los 64 GB funcionen a sus 6000 MT/s CL38 anunciados, sin errores de memoria ni problemas de arranque.

He encontrado varios kits TeamGroup 2×32 GB DDR5-6000 CL38 con chips Hynix M-Die en la lista QVL de ASUS, aunque todavía no he confirmado el número de modelo exacto del mío.

Mis preguntas:

  • ¿Alguien ha experimentado este problema con el Ryzen 7 9800X3D y una placa ASUS B650?
  • ¿Podría deberse al entrenamiento de memoria, la versión de BIOS o a los parámetros automáticos del controlador de memoria?
  • ¿Qué ajustes específicos y seguros recomiendan revisar para estabilizar 6000 MT/s con 2×32 GB Dual Rank?
  • ¿Alguien ha conseguido hacer funcionar este tipo de kit a 6000 MT/s sin errores?

Agradecería recomendaciones basadas en experiencias reales. Preferiría evitar cambios de voltajes a ciegas o seguir probando configuraciones sin un diagnóstico claro.


r/overclocking • • 3h ago

OC Report - GPU It´s Argon sayin... not me

0 Upvotes

r/overclocking • • 8h ago

Inconsistent fps with msi

1 Upvotes

So I have a weird issue if I start pc and do benchmark on mw4, then play games and test again fps is lower, if I reapply msi profile it goes back to normal. There must be something is task manager or task scheduler causing this?

Any one any ideas? Thanks


r/overclocking • • 23h ago

Ddr3 overclocking

Post image
7 Upvotes

Is this ddr3 limit

2400mhz 4 ram sticks

Timing 11-13-13-32

North bridge ring speed 4.4ghz

Latency 48ns

And pc is

I7 4770k 4.7ghz

And 32g ram


r/overclocking • • 19h ago

6600mt/s

3 Upvotes

is this rare i just booted it everything is on auto dont mind these values if stable ill tighten and lower voltages, ai said booting 6600 is 0.1% silicon, lowk excited i was running 6000


r/overclocking • • 21h ago

Help Request - CPU Do I need to change my curve optimizer on my 5800X3D?

2 Upvotes

I am currently running an all core -30 offset, fully stable, at constant 4.3GHz. Even though I have a 240mm radiator, it get's eventually bit too hot and the clock speeds go down to around 4.28GHz, but otherwise no problems. I am concerned though that I might be losing performance by starving my CPU of voltage.


r/overclocking • • 11h ago

Problemas de estabilidad con DDR5-6000 EXPO en Ryzen 7 9800X3D + ASUS B650

Post image
0 Upvotes

Hola, necesito ayuda con un problema de estabilidad de memoria RAM que comenzó después de actualizar mi procesador y la BIOS.

Especificaciones de mi PC:

  • CPU: AMD Ryzen 7 9800X3D (anteriormente Ryzen 7 9700X).
  • Placa madre: ASUS TUF GAMING B650-PLUS WIFI.
  • BIOS: Versión 4004.
  • RAM: 64 GB (2×32 GB) T-FORCE Delta DDR5-6000 CL38, Dual Rank, chips SK Hynix.
  • Perfil EXPO: 6000 MT/s, 38-38-38-78, 1.35 V.
  • GPU: NVIDIA RTX 5070.
  • Fuente: Corsair 850 W 80+ Gold.

Descripción del problema:

Después de cambiar mi Ryzen 7 9700X por un Ryzen 7 9800X3D y actualizar la BIOS, comencé a tener problemas de arranque y estabilidad al activar EXPO a 6000 MT/s.

La placa permanece bastante tiempo con el LED naranja de DRAM encendido, algunas veces tarda varios minutos en dar imagen y otras veces muestra el mensaje:

“The system has POSTed in safe mode because of system instability.”

Pruebas realizadas:

  1. DDR5-6000 CL38 (EXPO on the fly): Windows consigue iniciar, pero OCCT Memory detectó aproximadamente 1.238 errores en apenas 50 segundos.
  2. DDR5-6000 CL38 (EXPO I): Fallo de POST y recuperación automática de la BIOS.
  3. DDR5-6000 CL40 (timings relajados): También presentó fallo de POST.
  4. DDR5-4800 CL40 (Auto): OCCT Memory durante 5 minutos, 0 errores.
  5. DDR5-5600 CL40 (40-40-40-84): Arranque exitoso y OCCT Memory durante 10 minutos, 0 errores.

Los dos módulos pertenecen al mismo kit de 64 GB y están instalados en los slots A2 y B2.

Mi objetivo:

Conseguir que los 64 GB funcionen a sus 6000 MT/s CL38 anunciados, sin errores de memoria ni problemas de arranque.

He encontrado varios kits TeamGroup 2×32 GB DDR5-6000 CL38 con chips Hynix M-Die en la lista QVL de ASUS, aunque todavía no he confirmado el número de modelo exacto del mío.

Mis preguntas:

  • ¿Alguien ha experimentado este problema con el Ryzen 7 9800X3D y una placa ASUS B650?
  • ¿Podría deberse al entrenamiento de memoria, la versión de BIOS o a los parámetros automáticos del controlador de memoria?
  • ¿Qué ajustes específicos y seguros recomiendan revisar para estabilizar 6000 MT/s con 2×32 GB Dual Rank?
  • ¿Alguien ha conseguido hacer funcionar este tipo de kit a 6000 MT/s sin errores?

Agradecería recomendaciones basadas en experiencias reales. Preferiría evitar cambios de voltajes a ciegas o seguir probando configuraciones sin un diagnóstico claro.


r/overclocking • • 15h ago

Benchmark Score Is this good?

Post image
0 Upvotes

I am fairly new to overclocking I really like it, i just want to see if I can improve


r/overclocking • • 15h ago

Help Request - CPU Steps with new i7-14700k

1 Upvotes

Hey, got a new 14700k (along with new MB) to upgrade my build and seeing some issues regarding overheating. Also a lot of talks about undervolting, etc. Pretty new to this so just wondeirng what steps I should take before I even install it


r/overclocking • • 16h ago

Ryzen 9 9950X3D + MSI X870E Tomahawk: reliable 128GB → 256GB DDR5 upgrade? Conflicting MSI/Kingston answers

0 Upvotes

Hi everyone,

I'm building a high-memory workstation for intensive financial backtesting (Python, NumPy, pandas, heavily parallelized CPU workloads running continuously for days or weeks).

My planned configuration:

  • CPU: AMD Ryzen 9 9950X3D
  • Motherboard: MSI MAG X870E TOMAHAWK WIFI (7E59-004R)
  • Initial RAM: 2 × 64GB Kingston ValueRAM KVR56U46BD8-64, DDR5-5600 CL46, 2Rx8
  • Future upgrade: 4 × 64GB (256GB total)
  • OS: Windows 11 Pro

The problem: MSI and Kingston have given me conflicting information.

MSI support says this exact Kingston part number is absent from their X870E memory QVL and therefore cannot be officially validated in a 4 × 64GB configuration.

Kingston's Technical Resource Group says the module appears in their X870E configurator and refers to motherboard QVL validation of 4 × 64GB configurations up to 5600 MT/s. However, Kingston has not independently tested this exact combination.

Kingston also warns that the ValueRAM series is multi-BOM, meaning identically labelled modules may contain different internal components.

My questions:

  1. Has anyone actually tested 4 × 64GB DDR5 (2DPC 2R) on this exact MSI motherboard, ideally with a Ryzen 9950X3D?
  2. Which exact RAM part numbers, BIOS versions and memory speeds were stable?
  3. Has anyone successfully combined two separately purchased 2 × 64GB pairs?
  4. Does anyone have documentation confirming or contradicting MSI's QVL response?
  5. Would you recommend a different officially validated 4 × 64GB kit for maximum reliability?

DDR5-3600 with 256GB would be perfectly acceptable to me if it provides better stability. I'm not trying to maximize benchmark scores.

My priority is long-term computational reliability and reproducible results, not peak memory overclocking.

I'm especially interested in actual test results (y-cruncher, TestMem5, OCCT, MemTest86, extended workloads), BIOS versions and exact module references.

Thanks for any technical insights or firsthand experiences!


r/overclocking • • 22h ago

R5 3600 b550m ddr4 samsung oem 16gb(2x8) e-die 3544 cl18

Post image
2 Upvotes

How overclock more? Stock 3200 cl22


r/overclocking • • 1d ago

Follow-up on Stutter Guard: why it isn't just for dual-CCD X3D chips, what it actually Addresses vs doesn't and a global invite to test my project on any hardware

19 Upvotes

I posted Stutter Guard here twice last week (v0.7.0 and v1.0.0). Half of the comments told me to knock off the AI launch formatting, and the other half pointed at actual actionable Edge cases To account for — plus a lot of people thought I built this only for dual-CCD X3D chips.

Before Auditing the Full FAQ one by one Later , There is the core unfiltered point and vision of stutter guard and the way i think:

unfiltered version — why I built this and why it isn't just a 9950X3D/X3D App:

Just moving interrupts out of CPU 0 and stopping device contention on a single core gets you 90% of the benefit on any CPU. Hybrid platforms like dual-CCD X3D and Intel P/E are what I talked about first because (1) my primary gaming PC is a 9950X3D, and (2) I wanted to show the app handles complex topologies cleanly no matter How Obscure the CPU toplogy looked like. On paper Windows schedules and balances work across cores; in reality, default Windows placement still piles GPU, USB, network, and audio interrupts and the DPCs tied to them onto CPU 0 and my app addresses that Properly ,The app Behaves Differently depend on the CPU it sees , if its a regular 9700x for example it still separates Interrupt heavy devices from each other (and away from CPU 0-1 which Generically coded apps love) , you dont need process lasso at all in fact i don't recommend separating the PROCESS affinity in process lasso on Single CCD or Single Chip processors because There aren't that many cores to spare to leave As a Sole single device interrupt handler. (I have Stutter guard on other systems but What i had benchmarked are latency Mon numbers that most of you don't want to see)

doing it on Dual CCD or intel hybrid as a gaming /Audio Workstation Profile is just a luxury The app offers , Not a requirement

I also don't know if i mentioned this in the readme or any where on the app THE PROCESS LASSO PROFILE MY APP GENERATES FOR HIGH CORE COUNT CPUS IS FOR LATENCY SENSTIVE WORK (GAMING/AUDIO WORK ONLY) , If You are running all core loads Where Through put only matters and Performance ACTUALLY scales linearly with core count (Y-cruncher, CineBench ,etc...) you do like i do Myself and have a Daily mode on hand Which just defaults affinity to all cores That is what i do on my personal rig Or The specific App that Wants throughput gets an all core exception on the gaming profile if you are forgetful Both implementations work

There is universal gain to be had on standard Windows setups that doesn't require 3D V-Cache or multiple CCDs: Stutter Guard's AMD GPU idle-power tweaks cut amdkmdag.sys wake routines and low-load clock swings (for example, MK1 capped at 60 fps where Adrenalin lacks NVIDIA's global "Prefer Maximum Performance" option and drops clocks erratically at certain exact light loads — MCLK DPM stays gated as Costly while idle-power keys are Measured), i had this happen on MK1 What helped is running AMD VSR and running the game at over 4k (Or Using the Amd idle Power Registry settings), disabling Windows/Device Manager power saving (MSPower_DeviceEnable) and link-state sleep stops D3 -> D0 wakeup DPCs across storage, network, and USB, and fixing Windows 10 2004+ per-process timer isolation cleans up wait-bound frame pacing , All the prior mentioned Device manager/Tertiary device Powersaving Features Have absolutely negligible impact To Any one on Desktop let alone someone Who is on a static overclock or Running aggressive PBO (That was One of the main Reasons of me Posting on r/Overclocking First before any other place )

My main audience (Gamers/Audio engineers) Care Mainly about consistency and stability only .

I built it as an all-in-one tool for Windows CPU/driver latency and mismanagement. The only stutters it cannot fix are :

traversal stutter (for example, a buggy asset pipeline trying to stream assets aggressively or asking too much in a short amount of time unrealistically)

shader compilation stutter (because the game is asking the CPU to compile a shader you were already supposed to see on screen — the only way that doesn't stutter is if the shader is already there or at least preloaded/compiled in the background like Microsoft ASD or AMD's newer Adrenalin 26.9.2 driver does).

I try To include as many Windows/Game Dev Related Edge cases/Fuckups as possible:

on Win10 2004+ Windows decided to introduce timer scheduling per process

(That is when Windows Decided To assign Timers per application as a power saving feature , in theory it is supposed To keep Modern Games OR Heavy latency senstive work loads Having fast timers and Background apps having slower)

In practice , like Crysis 3 (2013 , not the remaster) locking/bottlenecking around 64-65 fps , if we look at the max timer resolution a process can have on windows Which is 15.625 ms and we calculate the fps (1/ 0.015625) and we get 64hz which applied in the real world

This wasn't Research this was me playing an old game on my own System

Because The 2013 version was never coded To Ask For a 0.5 msec Timer The New Way on Win10 2004 and ownwards

Emulators like Dolphin, Rpcs3 , Pcsx2 Had the same Problems

Theoritacally any game Coded/not updated before Windows 10 2004 can have this problem , let alone lazy ports

Am i The only when who plays old games or what ?

What my app Applies is The old school system of assigning a global timer to all apps (Registry Key Read by Windows by default Not a specifically coded for aspect of the tweak) and then forcing the timer to be 0.5msec using an application That just asks for the Timer to for itself and the global timer setting that is basically amounts too (Apply the fastest Timer of all the apps asking for timers) , It doesn't interact with any other apps it just asks for a 0.5 msec the same way any application can , All other timer tools That Exist work the same way i just explained it and included it as part of an all in one solution

So, Someone else doesn't have to do Research on why That game from 2009 he played as a child or teen is a stuttery mess or frame capped on a system that can run it at a thousand fps if it actually came down to raw horse power

(GlobalTimerResolutionRequests + 0.5 ms logon holder App , gated behind Anecdotal / Everything), that exists To get the most consistent experience running any app , Running that as a scheduled task on startup on a laptop is not recommended (it wont Break anything it will just affect battery life ) , on the desktop you will have a hard time even calculating the power usage

I put my focus and the spare time i have actually improving the app , some of you mentioned Edge cases Which caused me To retest and improve the app and getting the app working on CPU topologies i haven't even sat Infront of , The Automation level of the app is ambitious to say the least (On Purpose) , Constant feed back is What keeps this improving
A generic llm FAQ is Not enough to get that point accross while also not addressing misunderstandings directly is bad for the app's reputation

I have non-X3D rigs on hand (5800H + RTX 3070 and 7700HQ + GTX 1060 Max-Q) alongside this desktop — I'm just under a tight time constraint right now due to my current commitments, The hardware is there But the time to Address absolutely every point of speculation imaginable all at the same time Then you bet i am putting that time on the app solely and i am doing my best to address all your concerns by hand , Whenever I have spare time, I spend it getting the app running the way I originally envisioned when I started.

There will also be your scheduled LLM FAQ summarization (don't worry i actually audit and Rewrite those to keep a clear conscience , every point addressed is read ,you can be sure of that) on another post

I'd be happy if some people who have the same mindset and have the spare time to A/B Test and talk to me to prove or disprove Stutter guard's effect on Gaming whether it be GPU or CPU Bound scenarios on Accurate monitoring apps like CapframeX or audio work, You are completely welcome to do so no matter your setup, that is the whole point

Repo (GPL-3.0): https://github.com/Kareem-Shabaka/stutter-guard

Latest release: https://github.com/Kareem-Shabaka/stutter-guard/releases/latest


r/overclocking • • 1d ago

7800x3d and turbo mode/game mode

4 Upvotes

Hi, I have a 7800X3D processor; should I enable X3D Turbo Mode?


r/overclocking • • 1d ago

Help Request - RAM How do i overclock my micron ram

3 Upvotes

I bought some slow kit for cheaper and i want to overclock


r/overclocking • • 22h ago

i9 14900k degredation voltage and frequency

0 Upvotes

I bought a 14900k that was already crashing and supposedly already fucked for a very discounted price. But now its stable at 5.1ghz all core at 1.20v e cores off. it was fine at 1.18v but any lower caused crashing. I know my 14600k can do 5.6 at around 1.27v so im guessing this 14900k is pretty degraded but still very much usable right? Debating on doing an RMA but i dont actually notice a difference in games


r/overclocking • • 1d ago

Does score roughly equal FPS on 3D Mark?

2 Upvotes

I'm testing a rendering build with a server CPU & 5090 and it's getting around 70FPS & 11K on Time Spy.

I see users with a 9950X3D get more like 30K. Does that equate to approx 200fps in Time Spy?


r/overclocking • • 1d ago

Help Request - CPU Ticking sound from DeepCool LQ360 Ultra pump block

3 Upvotes

I hope this post doesn't get deleted cuz it's a bit off-topic but my LQ360 Ultra started making an irregular ticking sound a few days ago. It's coming directly from the pump block on the CPU. It started right after I worked inside the case. Video attached.

Specs: Core Ultra 9 285K, DeepCool LQ360 Ultra (radiator top-mounted), Gigabyte Z890 EAGLE WIFI7

Already tested, no change:

Pump at 100% (~3,150 RPM, confirmed in HWINFO) for 20+ minutes

Pump at low speed

Magnetic cap/display removed while running

All fans and GPU fans ruled out. Temps are normal.

What should i do here?

Thanks!


r/overclocking • • 23h ago

I am unable to overclock the integrated graphics on my Ryzen 7 5700G.

0 Upvotes

I tried to overclock the integrated graphics on my processor; it shows 469MB. I went into the BIOS and changed it to 2GB, but after saving and exiting, the settings still show only 496MB.


r/overclocking • • 1d ago

Help Request - CPU Requesting help as a novice on tuning a 14900k on air cooling

1 Upvotes

Spec Sheet:

GPU: MSI Shadow 3X OC 5070ti
CPU: 14900KF (With an LGA1700 pressure plate bracket installed)
RAM: 32GB Hynix GSkill Ripjaws 3600 CL16 DDR4 (2x16)
Motherboard: MSI MPG EDGE WIFI DDR4 Z690
CPU Cooler: Noctua NH-D15S (Single fan with notch in heat sink for ram clearance)
Case: NZXT S340 Elite

I'm quite inexperienced with tuning, but I'm curious to try it out. I was playing cyberpunk 2077, and ran into a CPU bottleneck while using upscaling and ray tracing.

I know I am limited by my cooling, case design, and ddr4 memory, but I'd like to try and squeeze every bit of performance out of this chip as possible.

Are there any settings that people have tried and/or have started out with to help with their gaming performance in CPU limited scenarios?

I'm open to benchmarking myself and to tweak settings gradually in the bios, but I'd like a good starting point.

If anyone knows a good guide that would be helpful as well.


r/overclocking • • 2d ago

XOC Gear Glacial X870E Dimm Fann

Post image
179 Upvotes

This little thing actually rocks. It's magnetic with contact pins. Seeing a 5c drop in dimm temps just having it at 50% speed.

Can safely run DDR5 without worrying about hitting thermals running 65K on tREFI I believe it's called