r/robotics • • 50m ago

News From a sentence to a robot you can order: Nihil IDE

Thumbnail
youtu.be
35 Upvotes

r/robotics • • 6h ago

Mechanical Testing my 3D-printed gripper linkage by hand

22 Upvotes

I got a lot of questions about this gripper, so here’s a quick demo. I designed it for a student robotics competition, mainly to pick up plastic bottles and toy ducks. The ducks we use are a little bigger than a baseball. I’m moving the linkage by hand in the video so you can see how it works.


r/robotics • • 14h ago

Humor Taught it to lay down

61 Upvotes

r/robotics • • 3h ago

Community Showcase Various "Technic" Robots (Video)

7 Upvotes

Long time lurker to this sub. I make hobby robots out of kits and sets, including with Lego and Lepin parts. A compilation video of some of my projects. Some can be remote controlled or programmed with apps.


r/robotics • • 14h ago

Community Showcase Assembling a gadget at a trade show with a MicroFactory

35 Upvotes

Everything was programmed with prompts in natural language.

We also added a pneumatic interchangeable gripper system, so the robot can use tools instead of being limited to a clamp gripper.

Notice how the robot makes several attempts when inserting parts into the holder. It uses a 6-DoF force sensor to blindly analyze which direction it needs to shift to get the part in.


r/robotics • • 1h ago

Community Showcase PrimeBot T1 Pro owner in Europe — 25-minute hands-on and first impressions

2 Upvotes

I’m based in Europe and recently got my own PrimeBot T1 Pro. I’ve published a 25-minute hands-on video for anyone interested in a longer look beyond the short demonstration clips.

The T1 combines wheeled locomotion in an upright humanoid configuration with a quadruped configuration. Having both forms in the same platform is what caught my attention.

This is an introduction to my own unit and my first impressions, rather than a comprehensive benchmark of its capabilities. For context, my background includes robotics, robot teleoperation and digital characters.

It’s my video: https://www.youtube.com/watch?v=-6-csm2sgJg

If you’re working with a T1 or considering one, I’d be interested to compare experiences. What would be useful to document next—transformation, mobility on different surfaces, interaction, or development access?


r/robotics • • 12h ago

Community Showcase I'm building a robot vacuum cleaner

12 Upvotes

r/robotics • • 1d ago

Mechanical Robotic hand with hydraulic actuator

113 Upvotes

This is a robotic hand prototype I built. It is actuated by a single, small hydraulic cylinder. It's crude and lacks finesse but I built it to test the finger linkage design. This data will help me design the hands for the exoskeleton I'm currently building.


r/robotics • • 4h ago

Events Update: I added virtual robotics and Physical AI webinars to the events calendar I shared here

2 Upvotes

Hi everyone,

I previously shared the robotics events calendar I maintain on Black Scarab. Thanks for the feedback and suggestions.

I’ve now added a Virtual Events tab for live webinars and online sessions covering robotics, humanoids, machine vision, simulation, and industrial AI.

A few upcoming examples:

• November 24: Siemens and Accenture on Physical AI, robotics, and manufacturing.

• December 8: Universal Robots, NVIDIA, and Cambrian on putting Physical AI into production.

• December 10: MathWorks on reinforcement learning from simulation to embedded hardware.

Each listing includes the date, time, a short description, and a link to the organizer’s event page.

https://www.blackscarab.ai/events/virtual

Disclosure: I run Black Scarab. The directory is free to browse and doesn’t require an account.

Which useful robotics webinars or recurring online seminar series should I add? Smaller research groups and specialist sessions would be especially welcome.


r/robotics • • 1d ago

Electronics & Integration I made this for my college project

106 Upvotes

r/robotics • • 19h ago

Mechanical 6 dof cycloidal arm

Thumbnail
gallery
16 Upvotes

6 dof cycloidal robot arm with a ≈£200 budget Iit has Atleast 1.5kg of pushing force at mid extension, very minimal dual stage
actuators with raspberry pi pico 2 and Xbox controller compatibility - any improvements??


r/robotics • • 16h ago

Community Showcase Nice little fun project to get you excited...I hope 🥳

Thumbnail gallery
6 Upvotes

r/robotics • • 1d ago

Mechanical I built my own robotic gripper!

304 Upvotes

Hey everyone! I designed and built a compact, motor-driven gripper!

Unlike conventional grippers, it’s designed to wrap around curved objects like plastic bottles. When fully open, the fingers extend into a straight line, but as they close, they curl around the object for a snug grip!


r/robotics • • 1d ago

News Promise Robotics raises $28M to automate home construction using industrial robots

Thumbnail
automate.org
25 Upvotes

Promise Robotics has raised $28 million to expand its robotic homebuilding operations across North America, including a new facility near Phoenix scheduled to begin production in early 2027.

Rather than deploying robots directly onto construction sites, the company is moving parts of the building process into automated factories. Its software converts existing home designs into production instructions for industrial robots, which manufacture structural components like wall framing before they’re transported to construction sites.

The company also signed a multiyear agreement with D.R. Horton, the largest U.S. homebuilder, to support production for more than 1,250 homes in the Phoenix area.

Promise Robotics claims its approach can help builders complete homes 60% faster, although that figure hasn’t been independently verified.


r/robotics • • 22h ago

Community Showcase Point, don't prompt: I click an object and two UMI policies pick and place it on a modified SO-100 (open source)

12 Upvotes

I posted here before about reproducing UMI on a UR5, and later about a point-and-click diffusion policy. Since then I've been trying to answer one question: can these policies run on hardware a hobbyist can afford?

In the video:

- Two separate UMI diffusion policies: one to pick, one to place.

- Pick: I click the object; SAM 2 segments and tracks it (red mask), and the mask is an input to the pick policy.

- Place: I click a spot; TAPNext tracks that point, and it's an input to the place policy.

- A human only selects targets and starts each policy. No teleoperation.

- Neither policy was trained on Lego blocks. The first block slips, the second works.

To get here I built three pieces of hardware:

- Arm: an SO-100 mod with an extra wrist-yaw joint (5 → 6 DOF). UMI outputs full end-effector poses, so the 6th DOF matters.

- Gripper: UMI-style, single servo, rack and rail, 0–85 mm aperture. About $100 in parts vs about $4,000 for the Weiss WSG 50 in the original setup, and light enough for the SO-100. Raspberry Pi HQ camera on the wrist instead of a GoPro.

- Data collector: handheld, on a Pi Zero 2 W + HQ camera + IMU. It saves files in GoPro Hero 10 layout, so the UMI SLAM pipeline runs unchanged. Since it's a Pi, you can add sensors like tactile.

Everything is open source; links in the comments. Happy to answer anything about the hardware, the SLAM pipeline, or getting UMI to work on cheap arms. It's early, so bug reports are very welcome.


r/robotics • • 15h ago

Controls Engineering 7th axis issues on my robot

3 Upvotes

Hello, the following cell recently arrived:

  • A 6-axis Borunte robotic arm.
  • A rack-and-pinion rail driven by a servo motor (which is connected to the Borunte robot cabinet – I have attached a photo in section 1).

After mounting the arm onto the rail and powering on the cabinet, alarms were triggered showing error 16006, which indicated motor overload. For some reason, the brake plates had stuck together; that issue has been resolved. However, now every time the deadman switch is pressed (which releases the brakes), axis 7 starts moving randomly (sometimes in the positive direction and other times in the negative direction) instead of staying still while waiting for a command from the teach pendant. This happens for a brief moment before it stops and triggers error 16021 (J7 cErr_SPD1_ME).


r/robotics • • 1d ago

Community Showcase Three SO-101 arms, three control methods, one shared ball-transfer task

22 Upvotes

r/robotics • • 13h ago

Perception & Localization Introduction to Tactile Sensing

Thumbnail
youtube.com
2 Upvotes

I made an interactive introduction to tactile sensing. It explains how different sensors turn physical contact into electrical signals, and the trade-offs involved in choosing one for a robot.

Try the interactive diagrams in the full blog: https://www.pattarsuraj.com/blog/introduction-to-tactile-sensing

#TactileSensing #TactileSensors #Robotics #RobotLearning #Sensors


r/robotics • • 10h ago

Discussion & Curiosity New Open Source 3D block system for Swarm Construction

1 Upvotes

Disclaimer - I am not the creator, just sharing

Saw a video with this new 3D printing system, looks really neat and looks like it has a lot of potential for swarm construction research and setup: https://www.youtube.com/watch?v=o8L-rO53gxs

Some pictures from the video:

Here is a link to their website for all the files to print: https://www.mados3d.com/


r/robotics • • 1d ago

Mechanical I made own robotic hand!!

53 Upvotes

Hi everyone! I’m designing a humanoid robot, and I’ve had great results with my Mech Hand V6, so I decided to share a video to document it.

Unlike Bowden cable (tendon-driven) designs, Mech Hand V6 uses rigid linkages to connect the fingers to the motors. This eliminates the hassle of adjusting tendon tension!


r/robotics • • 21h ago

Community Showcase Got fed up sourcing robot parts one at a time, so I built a tool that finds suppliers for a whole assembly from CAD

3 Upvotes

I've been sourcing components part by part for years and got fed up with how repetitive and slow it is, so I built this. It takes the CAD/drawings and finds suppliers for every part in one go.

What parts do you find hardest to source?


r/robotics • • 21h ago

Community Showcase walking progress update 17-11-2026 #robotics #esp32project #arduinoproj...

Thumbnail
youtube.com
2 Upvotes

Hello i wanted to show my progress on building a 2 legged from scratch.I made progress in walking a little bit with a bluetooth gamepad.It is not perfect.I still need to figure the balancing.This robot is still a prototype for testing until it can walk better


r/robotics • • 18h ago

Discussion & Curiosity ICRA 2027

Post image
1 Upvotes

Hello!

I was randomly checking PaperCept for my ICRA 2027 submissions and either yesterday or today, one of my submissions is now showing "Decision Pending" as the status.

Is this a good sign? Or is this a desk rejection sign? Decisions are supposed to roll out at the start of January 2027 so I'm scared as to what this means.