r/robotics • u/Accomplished-Youth68 • 3h ago
Community Showcase SO-ARM102 is now listed in LeRobot!
SO-ARM102 is now listed in the official LeRobot documentation.
Build files & assembly guide: https://github.com/roboninecom/SO-ARM102
r/robotics • u/Accomplished-Youth68 • 3h ago
SO-ARM102 is now listed in the official LeRobot documentation.
Build files & assembly guide: https://github.com/roboninecom/SO-ARM102
r/robotics • u/MemestonkLiveBot • 1h ago
Disclosure: this is a robot my team is building. Everything here is simulation, not real footage, and the real prototype drives much slower than this today.
We wanted a messier test for the drive base than cones, so we gave it six cats.
How it works:
Four went in within about 90 seconds. The last two took another 85.
How would you handle the stragglers? More technical detail on the sim setup is in my r/IsaacSim post.
Cat models (CC-BY 4.0, Sketchfab): lilyjoyhanna, rhcreations, IraTriani, Vr-cvantorium.
r/robotics • u/ResponseRegular8707 • 2h ago
Hi guys, I'm proud to show you guys my 3rd year electronic engineering project. It's a vision based self parking car. Its made to identify occupied parking spaces and free parking spaces and park itself on that available space. It parks for parallel parking and diagonal parking.
It learned to park through imitation learning over 300 recorded parking attempts from the expert(me).
r/robotics • u/SnooRadishes9473 • 3h ago
If you're looking for a mini size a low acoustic camera for your robotics,
Do think a 5.6watt, 310g and 84*80mm is small enough?
Could you share the expect of your application?
r/robotics • u/Virtual-Fill539 • 2h ago
I want to make a delta robot as my first project, currently I'm just a school student with some abilities in programming, electronics, and very weak mechanics.
So, how hard will it be to make this project? What should I do to avoid some problems with delta?
And is there any sense to post my progress here on reddit?
P.s. is it a right sub for this post?
r/robotics • u/PinOpen9883 • 15h ago
I recently ran my RGB slam camera RoboBatonNeo on the ETH FPV dataset, currently sitting at 3rd place.
It's a little difficult. This dataset is pretty extreme:
☞ In the hardest sequence, speed reaches 100km/h
☞ Acceleration approaches 7G (69.85 m/s²), angular velocity up to about 20 rad/s
☞ Monocular images suffer from severe motion blur and pixel displacement at these speeds
Most of the top-ranked methods use stereo cameras + IMU. Our setup uses a single camera + IMU and runs on a board with a power consumption of 0.6 W.
Stacking high-speed dynamics + monocular + extremely low power makes it quite challenging to keep the algorithm both lightweight and stable. Logging this result for further iteration.
Anyone working on drone visual navigation or SLAM is welcome to chat.
I will share the work on Github once I've put everything together. Future updates will go there too.
r/robotics • u/CharmingTechnician47 • 54m ago
r/robotics • u/aebatirel • 4h ago
We built a news ingestion machine and converted the content into weekly robotic news video, planning to do this weekly. What do you guys think?
r/robotics • u/Tbagho • 21h ago
Enabling robots to infer interaction-relevant physical properties from vision before contact would improve planning and control in unstructured environments. Vision provides useful pre-contact information, but appearance alone is often ambiguous: visually similar regions can induce different friction, stiffness, or sinkage responses upon contact.
r/robotics • u/Kemerd • 22h ago
r/robotics • u/UpbeatTank • 8h ago
A bamboo-link robot with rolling-contact joints.
Blog post on rolling contact joints: https://www.pattarsuraj.com/blog/rolling-contact-joints
#robot #robotics #3dprinting #mechanicaldesign
r/robotics • u/Herodont5915 • 20h ago
This might seem like a weird question, but is anyone on here interested in helping to build a robotic, rugged outdoor pooper scooper? I’ve got a dog, and like every other family out there, I’ve got kids who promised to clean up after the dog. Needless to say, they don’t. So.
Goal: Outdoor pooper scooper.
I’m looking for folks who are willing to build something open source, who are willing to share their methods, and mostly folks who are interesting in building something useful just for fun.
r/robotics • u/ifrit53227 • 1d ago
Long time lurker to this sub. I make hobby robots out of kits and sets, including with Lego and Lepin parts. A compilation video of some of my projects. Some can be remote controlled or programmed with apps.
r/robotics • u/SecretHelicopter2371 • 13h ago

I don't know if it's just me, but sometimes I'm genuinely dumbfounded when someone hands me a paper and tells me to pick up where they left off. This one is a humanoid robot prototype that got hands off to me, there's no details documentation of how each things come, just equation and explanation. Do you guys try to understand all of it or just continue their work and only read it if needed?
r/robotics • u/Even-Prune3029 • 8h ago
https://discord.gg/MsNWJqBRc Everyone interested in RL or Robotics join the server and upvote so more people join
r/robotics • u/appleartsstudios • 4h ago
r/robotics • u/negita135 • 1d ago
I got a lot of questions about this gripper, so here’s a quick demo. I designed it for a student robotics competition, mainly to pick up plastic bottles and toy ducks. The ducks we use are a little bigger than a baseball. I’m moving the linkage by hand in the video so you can see how it works.
r/robotics • u/Wing-Realistic • 1d ago
Everything was programmed with prompts in natural language.
We also added a pneumatic interchangeable gripper system, so the robot can use tools instead of being limited to a clamp gripper.
Notice how the robot makes several attempts when inserting parts into the holder. It uses a 6-DoF force sensor to blindly analyze which direction it needs to shift to get the part in.
r/robotics • u/daxx2k • 23h ago
I’m based in Europe and recently got my own PrimeBot T1 Pro. I’ve published a 25-minute hands-on video for anyone interested in a longer look beyond the short demonstration clips.
The T1 combines wheeled locomotion in an upright humanoid configuration with a quadruped configuration. Having both forms in the same platform is what caught my attention.
This is an introduction to my own unit and my first impressions, rather than a comprehensive benchmark of its capabilities. For context, my background includes robotics, robot teleoperation and digital characters.
It’s my video: https://www.youtube.com/watch?v=-6-csm2sgJg
If you’re working with a T1 or considering one, I’d be interested to compare experiences. What would be useful to document next—transformation, mobility on different surfaces, interaction, or development access?
r/robotics • u/LioBotExo • 1d ago
This is a robotic hand prototype I built. It is actuated by a single, small hydraulic cylinder. It's crude and lacks finesse but I built it to test the finger linkage design. This data will help me design the hands for the exoskeleton I'm currently building.
r/robotics • u/rgc4444 • 1d ago
Hi everyone,
I previously shared the robotics events calendar I maintain on Black Scarab. Thanks for the feedback and suggestions.
I’ve now added a Virtual Events tab for live webinars and online sessions covering robotics, humanoids, machine vision, simulation, and industrial AI.
A few upcoming examples:
• November 24: Siemens and Accenture on Physical AI, robotics, and manufacturing.
• December 8: Universal Robots, NVIDIA, and Cambrian on putting Physical AI into production.
• December 10: MathWorks on reinforcement learning from simulation to embedded hardware.
Each listing includes the date, time, a short description, and a link to the organizer’s event page.
https://www.blackscarab.ai/events/virtual
Disclosure: I run Black Scarab. The directory is free to browse and doesn’t require an account.
Which useful robotics webinars or recurring online seminar series should I add? Smaller research groups and specialist sessions would be especially welcome.
r/robotics • u/Impressive-Bed1777 • 1d ago
6 dof cycloidal robot arm with a ≈£200 budget Iit has Atleast 1.5kg of pushing force at mid extension, very minimal dual stage
actuators with raspberry pi pico 2 and Xbox controller compatibility - any improvements??