r/sewhelp • • 2h ago

šŸ’›BeginneršŸ’› How is this type of collar made?

Post image
3 Upvotes

r/sewhelp • • 3h ago

✨Intermediate✨ Issues with free motion foot, out of ideas for what could be wrong

Thumbnail gallery
2 Upvotes

Sewing on a 1970s kenmore, (148.157) trying to use a free motion foot to do the topstitching on my first quilt. Fabric is quilting cotton and batting is warm and natural cotton. Thread is coats and Clark 100% cotton machine quilting thread (30wt) used the same thread for the piecing with no issues.
However now, with the free motion foot, my thread keeps skipping stitches and getting the top thread worn/bunched up when it skips, causing it to break. It’s also leaving visible holes in the fabric that don’t seem to wash/steam/iron out. (See photos for broken thread and holes)

All the same issues after changing the needle (tried a 70/9, 75/11, 90/14, and 100/16 quilting needles.

Have tried adjusting the tension on the top thread and the bobbin, getting it even at a low/medium/high tension doesn’t seem to make a difference, though slightly better with leaving holes when both are lower tension.

Tried with strong/medium/weak pressure from the presser foot, all to no avail as well. Took slow motion videos of the shuttle/bobbin assembly when stitches were skipping and couldn’t find why it was sometimes not catching. (Will add video in comments if possible)

If it matters, you can’t lower the feed dogs on this model, but I’m using the cover plate that came with it. The foot itself is a cheap Amazon one, but the bottom is smooth and doesn’t seem to be catching or rubbing.

I consider myself fairly well versed in machine troubleshooting for being self taught and I’m not afraid to tackle more advanced machine adjustments, but I’m all out of ideas 😭
Any advice appreciated!!!


r/sewhelp • • 7m ago

✨Intermediate✨ Help!! Janome Memory Craft 9480 vs Juki DX-4500

Thumbnail
• Upvotes

r/sewhelp • • 22h ago

✨Intermediate✨ Is it possible to sew modern underwear with 100% cotton (no stretch) lace?

58 Upvotes

I’ve recently been down a rabbit hole of trying to find 100% cotton underwear (or at least no plastic) including lace and trim. No one seems to make such a thing (at prices I can currently afford)! Luckily I sew, but it doesn’t seem like something people in the sewing community even experiment with. Obviously the way modern underwear is designed, the stretch in the hems is necessary. I’m just curious if anyone knows alternatives or design features that can allow for non plastic lace (usually non stretch) in cute cheeky underwear.

Any resources, material recommendations, or advice are welcomed :)


r/sewhelp • • 24m ago

Trying to do an edging stitch on a square (4 layers of fabric)

Thumbnail gallery
• Upvotes

I made my brother's dog a weighted blanket, and he wants me to put an edge on it to hold the four layers of fabric together. I have done edging stitching on squares before, so I didn't think it would be that hard. Something is going wrong, though, and I don't know if it is my tension. Keeps looking like this on the back (see pic). At this point I have seam ripped it like 9 times and am frustrated and the fabric is getting destroyed. I need some serious help.

Second pic is of the foot I am using. I believe this one was ordered specifically to do this kind of stitching. I am using a pretty basic sewing machine. There are three main settings. One for stitch length, stitch width, and then a tension setting. I don't know the technical terms for any of this. Please help! I want to get this fixed for my brother asap!


r/sewhelp • • 25m ago

✨Intermediate✨ Why does my sew out look like this?

Post image
• Upvotes

Hello Reddit, I need some help. I’ve been embroidering professionally for around 2 years now, and I’ve never run into this issue before. I have a Tajima 6 head machine. How can I stop this from happening to my sew out? I’ve cleaned the bobbin case, replaced bobbin, replaced needle, replaced top thread, and it keeps nesting in the back but not fully stopping the machine. It’s not breaking things other than there being more top thread breaks than normal. I oil my machines 2 times a day, every four hours. Is there anything I can do?

also, this is on hats. It’s set to cap on the machine.


r/sewhelp • • 1h ago

✨Intermediate✨ JUKI HZL 300 Bobbin case keeps jamming

• Upvotes

Hi all, my juki has run into an unfortunate error where the bobbin thread kept jamming. I suspected a thread jam but I couldn’t find anything stuck in the machine. I suspect it could be because somehow the timing is now off or the bobbin case is out of place? The needle is hitting the casing and I don’t think that is supposed to be happening yet I can’t find anything stuck video of how it is supposed to look ANYWHERE. Can anyone please help me reseat the casing or tell me what I am doing wrong?

Thank you, I really need to finish my project todayšŸ™


r/sewhelp • • 1h ago

Bernina settings - foot selection

Thumbnail gallery
• Upvotes

I'm trying to use the invisible zipper foot and I can't select it (it's greyed out) on the foot screen. Are there settings I need to change to make it available? Is there a reference for what the settings need to be for different feet?


r/sewhelp • • 1h ago

Recommended Sewing Machine Model

• Upvotes

Hello po. I took 3 days of learning how to sew using a sewing machine, at gusto ko bumili ng sewing machine. Bibili ako sana ng Singer na computerized, dahil iyan lang ginamit ko habang yun iba kong ka-workshop classmates Brother since na-late ako on the first day, pero out of stock na sila. Hinahanap ko kasi yun sewing machine na computerized, heavy-duty (pwede sa mga heavy at light fabrics), madaling ma-repair, at affordable para sa bahay lang. I researched a few computerized sewing machines, both pros and cons. Somehow, I began to worry na baka hindi ko mabibili iyon dream sewing machine ko. Gagamitin ko iyan sa pagtatahi ng mga T-shirt, short, waterproof jacket, neck gaiters, OC cosplay, at mga iba pang damit, at iyon blankets and curtains. And I'm planning to use whatever textile is sustainable (organic cotton or linen or recycled), and other kinds of fabric na either stretchy or not. At tsaka hindi ako fan sa quilting.

So I just want to ask anong sewing machine na pwede niyo i-recommend.


r/sewhelp • • 1h ago

Paghahanap ng sewing machine.

Thumbnail
• Upvotes

r/sewhelp • • 1h ago

Sewing Machine Reccomendations

• Upvotes

Hello! Currently working with my local library to purchase a machine that is able to be used in the Makerspace.

We anticipate about 6-8 hours of sewing per week, we would like it to LAST (or at least be easily repaired/serviced), and go through cotton, linen, leather, spandex, canvas fabrics. This machine should also be semi-beginner friendly

Any suggestions are greatly appreciated! Looking to stay around $600, but open to other options as well if what we’re looking for needs a higher budget.


r/sewhelp • • 6h ago

šŸ’›BeginneršŸ’› Help please - inherited grandmother's 1959 Bernina 530

Post image
2 Upvotes

r/sewhelp • • 6h ago

Brother CS6000i not sewing in reverse

1 Upvotes

r/sewhelp • • 13h ago

šŸ’›BeginneršŸ’› How to repair worn waistbands

Post image
3 Upvotes

I wear a lot of bamboo, in particular Peter Alexander pyjamas. I have noticed the waistband is the first to go, with the crease wearing thin and splitting. The rest of the garments are fine. Any suggestions of how to fix/repair these to get longer use out of them?


r/sewhelp • • 7h ago

šŸ’›BeginneršŸ’› What do I ACTUALLY need to make a jelly roll rug???

1 Upvotes

I've altered a LOT of clothes & hemmed a lot of cloth, so I'm pretty familiar with a sewing machine. I accidentally bought one of those long rolls of fabric strips when I meant to buy something else, but kept it because I knew I could do something with it. I've seen lots of jelly roll rugs and some videos of how they're made, so I bought the appropriate batting. But since then, I've seen some tutorials that make putting together a jelly roll rug look way more complex than I thought it was.

All that to say: I don't have the time/ money to buy a bunch of tools. What I have are: pre-cut strips of fabric, fabric scissors, shears, roll of thin batting, & a sewing machine. Can I realistically let my hubris take the lead and make a decent first jelly roll rug with these materials alone + my overblown confidence that if it looks doable enough then surely I can do it??? Or do I need more tools or experience to pull this off? At first I thought all I needed was evenly cut strips of fabric & batting, a zigzag stitch on the sewing machine, and a willingness to undo my work along the way if I mess up, but now I'm second guessing myself ā˜¹ļø I've done a decent amount of sewing machine work but I added the beginner flair because I've never made a jelly roll rug before!


r/sewhelp • • 9h ago

Sew in one day! How to Sew? Asymmetric Skirt

Thumbnail youtu.be
1 Upvotes

This is a layered, high-low wrap skirt with a light, flowing silhouette. The front is short and open, while the back extends into a longer, rounded hem.

The skirt consists of three layers, each slightly shorter than the one beneath it. It can be made from lightweight fabrics such as tulle, chiffon, lace, or other sheer or semi-sheer materials, allowing for different texture combinations.

The skirt is designed as a wrap style with a waistband that ties at the front. The waistband encloses all layers for a clean finish.

The white skirt hem is folded two times and sewn. I didn't use a serger for the white skirt, so this pattern can be made without a serger.


r/sewhelp • • 23h ago

✨Intermediate✨ Lining and outer bodice not matching, help!

Thumbnail gallery
9 Upvotes

Hello, I’m sewing the Ella Dirndl pattern by THISISKACHI and I’ve encountered an issue while assembling my toile. I’m at the point where I’ve sewn the lining and the outer bodice, and the instructions say to sew the neck and arm holes together, but I noticed when laying them together that the lining side front piece is narrower than the outer bodice side front piece. I pulled the pattern pieces out to make sure I had cut them appropriately and it seems that the lining is intentionally smaller, and I cannot figure out why or how that is supposed to fit. If someone knows why please let me know!


r/sewhelp • • 21h ago

šŸ’›BeginneršŸ’› Fit help- need more space in the butt

Thumbnail gallery
3 Upvotes

I made these boiled wool pants for my toddler from a general sweat pant pattern that I modified. I did a trial pair first and then attempted to adjust for more room in the butt to accommodate cloth diapers. There still isn’t enough room. Also, the elastic didn’t gather quite as much as planned and it is loose in the waist. Generally these are large all around so I am debating leaving this pair as is and hoping that they will fit down the line and when he is out of diapers. However, I still want some pants for him. If there is a way for these to get a piece added to allow more room, I would be open to it, but also was hoping to get ideas on how to adjust to allow for more room in the butt in general. I think that if the rise of the crotch were longer and I could get a little more fabric they would be perfect. Thoughts on trying to adjust this pair vs adjusting the pattern and making a new pair? Red is the butt and the back panels overlap for a reinforced seat.


r/sewhelp • • 1d ago

šŸ’›BeginneršŸ’› Securing hand-sewn patchwork for washing machine?

Thumbnail gallery
3 Upvotes

r/sewhelp • • 19h ago

Need help sewing the Butterick B6970 baby romper design G

Thumbnail gallery
1 Upvotes

r/sewhelp • • 1d ago

šŸ’›BeginneršŸ’› Washing multiple pieces of colored cotton fabrics

Post image
5 Upvotes

Has anyone used Shout Color Catcher when washing multiple pieces of color cotton?
What are you methods?
Fabric is too expensive to mess up with color bleeding!


r/sewhelp • • 1d ago

How do I finish a sleeve seam without a serger or zigzag?

2 Upvotes

I feel like a French seam would be really bulky as I want to do this with terry cotton fabric


r/sewhelp • • 22h ago

What material are they using between the two fabric layers?

Thumbnail gallery
1 Upvotes

Reposting for more reach. Thank you for your help!


r/sewhelp • • 22h ago

šŸ’›BeginneršŸ’› help finding patterns?

1 Upvotes

hi, i've sewn before but never from a pattern. i want to make a plush duck for one of my friends for christmas, specifically i was going to use fleece. does anyone know of a good website or specific pattern for this project? thank you :)


r/sewhelp • • 22h ago

šŸ’›BeginneršŸ’› Pleeeeaaase help before I pull my hair out

Thumbnail gallery
1 Upvotes

Can anyone help me figure out what Iam doing wrong? I recently purchased the se725 and have primarily used it for quilting. 1 randomly started getting bird nesting and I cannot figure out what the issue is i have rethreaded 100 times, changed my needle, cleaned out my bobbin case and under it.

I have tried different fabric. I have changed tension. I have followed 100 videos trying to resolve this.

The other day my feed dogs pulled some fabric down, where my needle got stuck. changed needles after this. I did notice a small nick on the needle plate so maybe this is the cause?

I am using a 90/14 needle and all purpose thread,

More pics in comments