r/sewhelp • u/fishpanicattack • 57m ago
✨Intermediate✨ Issues with free motion foot, out of ideas for what could be wrong
gallerySewing on a 1970s kenmore, (148.157) trying to use a free motion foot to do the topstitching on my first quilt. Fabric is quilting cotton and batting is warm and natural cotton. Thread is coats and Clark 100% cotton machine quilting thread (30wt) used the same thread for the piecing with no issues.
However now, with the free motion foot, my thread keeps skipping stitches and getting the top thread worn/bunched up when it skips, causing it to break. It’s also leaving visible holes in the fabric that don’t seem to wash/steam/iron out. (See photos for broken thread and holes)
All the same issues after changing the needle (tried a 70/9, 75/11, 90/14, and 100/16 quilting needles.
Have tried adjusting the tension on the top thread and the bobbin, getting it even at a low/medium/high tension doesn’t seem to make a difference, though slightly better with leaving holes when both are lower tension.
Tried with strong/medium/weak pressure from the presser foot, all to no avail as well. Took slow motion videos of the shuttle/bobbin assembly when stitches were skipping and couldn’t find why it was sometimes not catching. (Will add video in comments if possible)
If it matters, you can’t lower the feed dogs on this model, but I’m using the cover plate that came with it. The foot itself is a cheap Amazon one, but the bottom is smooth and doesn’t seem to be catching or rubbing.
I consider myself fairly well versed in machine troubleshooting for being self taught and I’m not afraid to tackle more advanced machine adjustments, but I’m all out of ideas 😭
Any advice appreciated!!!
