r/thinkpad • u/Right-Grapefruit-507 • 18m ago
r/thinkpad • u/CrubOne • 59m ago
Question / Problem Issues with booting OS from USB
So I've gotten my hands on this Lenovo Yoga 11e and as you can see when trying I try to boot puppy linux from USB this is what I see.
I should mention that the laptop does indeed not have an internal drive, which explains my attempt at booting from an USB.
On startup I see the Lenovo logo and soon thereafter underneath it theese strange symbols start appearing which quickly start scrolling down untill they for some reason stop.
Do you guys have any idea if this might be a hardware issue or if it has to do with my linux installation?
I'm kinda stumped so some clarity would be very much appreciated.
r/thinkpad • u/HeftyAd9157 • 1h ago
Discussion / Information Should I clean my 7 year old E490 fan?
Looks like it definitely needs some dusting. ThinkPad gets overheated as well. I've never opened it so a bit hesitant. Will screwdrivers and a small brush be enough? In videos I've seen people using a plastic tool to pry open after unscrewing. Is that required? Is it ok to pull the dust slowly through the openings seen in the pics? Thankfully it's working despite a disk failure which causes it to take upto 4 minutes to boot. I don't wish to make anything worse with the fan cleaning procedure.
r/thinkpad • u/Express-Style8175 • 1h ago
Question / Problem Laptop in Repair loop
The laptop is a X1 carbon 5th gen i7. I ignored the new windows update, but when I ultimately downloaded it, the laptop was slower than usual. I ignored this and went on. I decided to download genshin later and kept it on around 50 percent and closed the installer. Now before you say, GENSHIN PROBABLY DID IT!. I was only installing it + my older Thinkpad from 2016 had no problems, and I checked task manager to see if it has any load on the laptop (it didn't). The laptop continued to be slow later. When I turned it on again, I was met with it checking system disks and then THIS. How do I fix this?
r/thinkpad • u/Key_Accountant744 • 1h ago
Question / Problem The elastic band on the display has come loose
How to put it back in place?
ThinkPad 13 gen 2
r/thinkpad • u/Turbulent-Skill5778 • 1h ago
Discussion / Information Oh, happy day!
Can't quite believe it. Just scored a W510 off Marketplace for only $25. Quick specs : i7 Q720, 32GB DDR3, and a 120GB SK Hynix SSD. Barely a scratch on it, and the battery holds a charge. Gonna have some fun today with this thing.
r/thinkpad • u/Big_Poem_7409 • 2h ago
Question / Problem What are the possible ways of solving this?
Got this laptop from my cousin like a month ago and now it has locked itself. My cousin bought it from his school back in like 2020 and then just left it in the drawer collecting dust. Then he gave it to me because he never really used it. I installed ubuntu, did some school stuff with it and everything was fine except that it had a unknown bios lock password so I couldn’t dissable secure boot. And then a few days later it locked itself behind yet another unkown password. Please help me solve this.
If I need to give more information just tell me.
r/thinkpad • u/epicsubnauticagamer7 • 2h ago
Discussion / Information preventive maintinance/mod advice
i recently bought this p15 gen 2 laptop for my engineerin school and wantin to keep it in good condition and working as long as possible any advice how to do that? I'm planning to swap the thermal paste soon and possibly get 2tb ssd. Also it has windows and linux.
exact specs are:
RTX a 4000 8gb
i9-11950H
64gb ddr4 ram
512gb ssd
full hd 1920x1080 60hz
r/thinkpad • u/Im_just_here_dot_txt • 2h ago
Discussion / Information My new L14 gen 3 setup
I opted for the L14 gen 3 because I liked the thought of the extra bulk and don't mind the cheaper materials. The L14 laptops really aren't that bad. I purchased it "eBay certified refurbished" which is supposed to be in like new condition but it's in more like good condition. Light scuffs all over the top and bottom (outer), and one of the trackpad buttons has a scratch, so I'd be wary buying a laptop certified refurbished from ebay. They gave me 30 back so it cost me 294 which isn't awful for getting a 2 year warranty. It also came with 16GB ram in dual channel so I was happy about that since I can utilize the iris xe graphics. It's the Intel model and has a 256GB ssd. I got the mcover hardshell case made for it (I don't like skins) and it doesn't look bad, fits perfectly and covers the scuffs, but since the l14 is already a little more bulky that the t14 just be aware that the shell does add extra weight to the top. The hinge was already a tiny bit loose so I tightened it a little and it doesn't bother me as much now. I was thinking of swapping out some parts and making it actually look like new but I'm undecided. Keyboard is nuphy air60 v2, and when the laptop is closed it feels very Gundam themed paired with the keyboard. Running fedora sway, have it dual-booted with windows because school.
r/thinkpad • u/ResearcherNo2317 • 2h ago
Buying Advice Needs your advice in buying the laptop
Hey everyone,
I'm planning to sell my current laptop and switch to a ThinkPad, and I'd love some recommendations.
Current laptop: Asus TUF F15 (FX506HE, 2021). It's served me well, but it has two problems I want to get away from:
It runs hot
The Wi-Fi drops when the laptop heats up, which is a dealbreaker for my workflow
My use case:
AI/ML work in Python, Jupyter and data preprocessing
Model training on cloud GPUs, so I don't need a dedicated GPU. Stable, reliable internet matters most, since I'm always connected over SSH, Jupyter and file uploads.
Mostly Fedora and Ubuntu, plus Windows 11 occasionally (dual boot)
What I'm looking for:
CPU: at least 8 cores, Ryzen 7 or i7 class
RAM: 16GB minimum, ideally 32GB or upgradable
Storage: 1TB, or an M.2 slot I can upgrade myself
Wi-Fi: reliable on Linux, ideally Intel or a replaceable card
Cool and quiet under sustained load
Ethernet port preferred
Non-touch screen, decent brightness (300 nits or more)
Good Linux support with no major sleep or Wi-Fi problems
Budget: around $400–450 for a refurbished or used unit. I can stretch to about $550 if it's really worth it.
Questions:
Which ThinkPad models and generations fit this best?
Any known Linux problems I should watch out for?
What should I check before buying a used or refurbished unit?
Thanks in advance!
r/thinkpad • u/tatsuki-san • 2h ago
Thinkstagram Picture ThinkPad T14-G2i in it's Natural Habitat
My trusty ol' T14-G2i on my flight today, fits "perfect" on a Delta Airlines tray table, unlike my previous Latitude.
Specs: Core i5-1145G7 with 32GB DDR4 and a SK Hynix 1TB NVMe SSD.
r/thinkpad • u/batuhanfurkanbes • 2h ago
Buying Advice Which x1 yoga should I get? Gen 4 or damaged Gen 8
I already have a powerful laptop and so I will use it as my secondary laptop and mostly for taking notes with stylus, coding and email. I got 2 deals:
1- Gen 4 with i7-8565U 16gb ram QHD 256gb %82 battery health- 290$
2- Gen 8 with i7-1365U 32gb ram FHD 512gb %90 battery health- 500$
Is g4 still good for these tasks (simple coding, notetaking)? 4 hours of battery life is enough for me and ill use linux instead of windows.
gen8 screen is damaged and repair cost is 200$ but usable:

r/thinkpad • u/vibewnv2027 • 2h ago
Buying Advice Looking for a cheap ThinkPad for programming/CS
I'm looking for a cheap new ThinkPad model from Ebay/Amazon that is:
- Below $300
- excellent condition
- has a graphics card (optional)
- includes charging cable
- good battery
- great Linux support
- repairable and upgradable
r/thinkpad • u/Electrical_Skirt1546 • 3h ago
Thinkstagram Picture This is my third ThinkPad laptop!
This is my third ThinkPad laptop. Yesterday, I purchased a ThinkPad X13 Gen 2, equipped with an i5-1145G7 CPU, 16GB of RAM, and a 256GB SSD. The 13-inch model looks very sleek and is significantly lighter than my T-series laptop.
r/thinkpad • u/Kirkwood1994 • 3h ago
Discussion / Information Setting up a new X1 gen 11 for our companies CEO today
r/thinkpad • u/DiscombobulatedFlash • 3h ago
Review / Opinion Unusual setup for my first Thinkpad
I bought a used Thinkpad t470s with nothing but topcase and a mobo this summer for very cheap, hoping to restore it with OEM parts, but I realized that'll be too expensive to make sense. I also had a TV in my kitchen that was running on a good ol' antenna
So I made an opensource smart TV out of it!
It runs CachyOS with KDE Plasma BigScreen and webapps of Russian IPTV sites and ororo.tv. It's works really smoothly and with simple 2.4ghz pc remote they make very polished tv build
Links to Plasma BigScreen and a YouTube video I followed to setup this:
r/thinkpad • u/ktaeohh • 4h ago
News / Blog THERE'S STILL ONE OUT THERE

https://www.ebay.com/itm/840140452798
I'm shocked someone is selling this on ebay, I've been searching for a T25 palmrest for almost half a year to no avail and I get a notification this morning that someone put one up for sale on ebay that's available and in hand. Gl to whoever snags this first.
r/thinkpad • u/Andre5144 • 4h ago
Review / Opinion [Lenovo 300W power brick] DC 20V distribution with a 15A adapter [female Slim Tip / female XT60]; XT60 PDB (DC 0~150V, 200A); cables from Lenovo power supplies (pigtail / Slim Tip). Power supply solution for multiple Lenovo ThinkCentre units – NO SOLDERING REQUIRED.
After nearly 5 years, the previous DC20V power distribution [setup][1] 300W power brick; ADL300SLC3A / ADL300SDC3A began to seem rather inelegant. It featured overly thin Y-splitter cables; 20 AWG—along with a multitude of unnecessary Slim Tip connectors. [BTW][2]
20AWG: OD 0.81 mm, cross-sectional area 0.52mm2, max 11A (20AWG transmission 1.5A)
vs. 14 AWG: 1.63 mm, cross-sectional area 2.08 mm2, 32–20 A (14AWG transmission 5.9A)
The power rating of a Lenovo power adapter is encoded within the connector pin [plug][3].
The power supply cables consist of a red core (positive) and a braided shield (negative). Shortening these cables requires soldering the braided shield. Do not coil the cables (as this causes heating).
The 15A adapter [female Slim Tip / female XT60][4] (measuring 36.8 × 18.5 × 8.2 mm) enabled the implementation of an XT60 distribution system (DC 0~150V, up to a total of 200A): connectors: 2 male & 4 female. In accordance with the convention for XT-series power connectors, male connectors serve as sinks (loads), while female connectors serve as sources (power supplies). XT60 Power Distribution Board [Total ~€29][5] (115 × 29 × 27.3 mm, 61 g).
- INPUT
- male -adapter 15A [Total ~€23] +Slim Tip 300W, 14AWG, 1.5m, brick DC20V15A 300W
- male -female_XT60, 14AWG, 0.1m; clamps; pigtail 15AWG, 1.8m, 230W, led, DC7450 + emergency power supply [Norsyee][6] NOR-12 station 232Ah /3.7V (4S LiPo) outlet DC7450 DC20V max17A (reserve +200Ah)
- OUTPUT
- female -m_XT60 14AWG 0.1m pigtail 14AWG, 1.5m, 300W Slim Tip +ThVx1 monitor 140W 7A
- female -m_XT60 14AWG 0.1m pigtail 14AWG, 1.5m, 300W Slim Tip +Tom (m920q) 40W 5A
- female -m_XT60 14AWG 0.1m pigtail terminals 16AWG, 1.2m, 170W Slim Tip +Nano 20W 1A
- female -m_XT60 14AWG 0.1m pigtail 18AWG, 1.1m, 90W DC7950 +ThP x201s 20W 1A
[1]: https://www.reddit.com/r/Lenovo/s/XwP4ZUjUYj
[2]: https://www.powerstream.com/Wire_Size.htm
[3]: https://www.thinkwiki.org/wiki/Power_Connector#Signal_Pin_2
[4]: https://www.aliexpress.com/item/1005013540077814.html
[5]: https://www.aliexpress.com/item/1005009384981530.html
[6]: https://shop470213879.world.taobao.com/category.htm
My alternative power sources:
modified R4875G1 server power supply (adjustable), 0~93V, 0~30A, 10 AWG, 1.0m cable, XT90/XT60 connectors
alternatively, it may be possible to use two smaller, identical "Slim Tip" power supplies connected in parallel
PS
It is possible to measure energy supply and/or consumption (separately).
RE: Check whether the terminals can accommodate a 14 AWG conductor (1.63 mm OD, 2.08 mm2 cross-section).
- XT60 pigtails with 14 AWG silicone-insulated wire (0.1 m length) offer greater flexibility when connecting to a PDB (Power Distribution Board).
RE: For soldered XT60 connectors, the maximum wire size is 12 AWG (2.05 mm conductor OD, 3.4 mm2 cross-section), rated for 35A (12 AWG / temperature rise <85°C); maximum voltage is 500V DC. Pay close attention to the quality of the solder joints (ensure the temperature remains <120°C under high current). The housing is made of flame-resistant polyamide (nylon) for safety. The connector is rated for 100–1000 mating cycles (if the male pins become loose, you can "break a toothpick inside" them to restore a tight fit). The connection should be held by the contacts themselves (the two 3.5 mm pins), not by the plastic housing.
r/thinkpad • u/BugPsychological8287 • 5h ago