r/vintagesewing • • 5h ago

General Question Is my tension good?

Thumbnail
gallery
3 Upvotes

So, I'm trying to fine tune my Elna SU 62c. I thought I was close, but then I bought new threads and everything went astray. After a lot of fiddling, nearly breaking top tension mechanism figuring out how to fix my mistakes and making makeshift weights with kitchen scales and some used batteries to test tension I have a pretty good result. It's certainly the best of all previous attempts, but I still can see a little bit of bottom thread on the top and the little bit if top on the bottom, especially when using Elna disks.

The tip thread is dark green, and the spool thread is red. What do you all think?


r/vintagesewing • • 12h ago

Patterns pattern confusion, please help?

Thumbnail gallery
1 Upvotes

hope this fits here, working on mccalls 8137 which is listed as an 1800 greatcoat pattern


r/vintagesewing • • 1d ago

Machine Question did i score a deal?

Thumbnail
gallery
8 Upvotes

Initially wanted to start learning how to sew for next years goal and low and behold i found this at the thrift. Do you think this is good beginner? It seems like there is some missing pieces.

Bought it for $35!


r/vintagesewing • • 1d ago

General Question Wilcox and Gibbs treadle

Thumbnail
gallery
51 Upvotes

Im very interested in buy this machine. It's missing the belt nbd. It's in great shape and it looks like it has all the parts. Does anyone see something I'm missing that would be a red flag? Asking $250


r/vintagesewing • • 23h ago

General Question How can I find a new belt for my machine?

1 Upvotes

just bought a machine off an old lady, seems to work enough just feels like the belt doesnt have enough traction for the motor or something.

So I wanna ask y'all, how do you find an old belt? Tried looking in the manual, googling the words stated in the parts list section "6902 rubber belt" with the 6902 being the "parts number"

do i just gotta bring the belt with me to a hardware supply shop and hope they have the right size?


r/vintagesewing • • 1d ago

Machine Question sowing machine troubles

Post image
2 Upvotes

hello! my mom recently gave me this sowing machine her mom gave her. It’s labeled dressmaker and it’s very old fashioned compared to newer sowing machines. it didn’t come with a manuel and any search i do for the manual comes up empty.

I was doing just fine with a few youtube tutorials and even made a costume recently. however last night i set it up as usual but it wasn’t actually stitching anything.
the top thread kept looping at the bottom of the fabric and then getting stuck in the under the dog teeth IN the bobbin holder. and my bottom thread wasn’t stitching at all so any top thread that would ‘stitch’ would come undone.

i’ve tried tightening the tension as was recommended by wiki how for thicker projects. It might be my needle as it is a 14 and not a 16 and the fabric i was using is thick. any tips or suggestions? i’ve rlly liked sowing since i’ve got this machine but what it doesn’t work i have no idea what it means or how to fix it.

any feedback is appreciated thank you ! i’ve added a photo of my machine incase anyone recognizes it !


r/vintagesewing • • 1d ago

Machine Question Looking for Kenmore 158.18024 Screw — Part #2362 or modern equivalent

1 Upvotes

Hello everyone,

I’m trying to locate a replacement screw for my mother’s vintage Sears Kenmore sewing machine, model 158.18024. She is currently using duct tape to hold the part on, and I want to surprise her by fixing it.

According to the Sears parts diagram, it’s item #16, part number 2362, identified as a set screw.

The screw attaches a small metal retaining bracket to the underside of the removable top cover.

I’ve measured an identical screw from the same bracket assembly using digital calipers, to the best of my ability…

Measurements:

  • Thread diameter: 3.42 mm
  • Estimated thread pitch: 0.57 mm
  • Overall length, including head: 5.16 mm
  • Length below head: approximately 4 mm
  • Head diameter: 4.81 mm
  • Head type: Slotted, flat-head countersunk

I’ve considered an M3.5 × 0.6 screw, but I haven’t confirmed that the threads match.

I’m hoping someone can help me with one of three things:

  1. Identify the exact thread size and specifications of Kenmore part #2362.
  2. Locate an original replacement screw, preferably available individually.
  3. Recommend a modern equivalent that will fit without damaging the threads.

I am providing photographs of a matching original screw and the mounting location.

Any assistance would be greatly appreciated.

Thank you!


r/vintagesewing • • 1d ago

Machine Question Is this Kenmore a good deal?

Thumbnail
gallery
16 Upvotes

I am a complete beginner and know absolutely nothing about sewing machines or sewing. But as I’ve been looking up good starter machines, I came across the Kenmore 158s and really like them.

I’ve been looking at FB marketplace and found this one. Is this a good deal??
It’s $100.
Description says: This is all metal and heavy. Tested and works. Very durable from 60/70’s
Could use a cleaning

Is “could use a cleaning” code for “I need to get it serviced” or does that literally mean it just needs a wipe down?

Thanks so much!!


r/vintagesewing • • 1d ago

General Question Bernina 1530

0 Upvotes

My mom has two sewing machines, both are Bernina 1530. I know these can vary in price, but are worth more than the average sewing machine. Question. Where is the best place to sell these and get a fair price for them? Thank you Here is my flair!


r/vintagesewing • • 1d ago

Machine Question Vintage Singer Repairs

Post image
8 Upvotes

I'm leaning to sew on my grandmother's Singer 648 Touch & Sew. It's in great condition aside from the gears. Two nylon gears broke and I ordered a full new set. In the process of replacing the gears I'm stuck unable to get the roll pin out of the top vertical gear (already tried roll pin punch and penetrating oil). Local sewing shop wants $125 to remove the roll pin only, $290 to complete the full 5 gears replacement and reset timing.

I've watched a bunch of YouTube videos and I feel pretty confident about the gear replacements but doing the timing myself I'm unsure of. Videos make it look easy but the shop says it could be difficult. The internet doesn't seem to come to a consensus one way or the other. I'd hate to pay the $125 and then have to pay $290 on top if I can't get the timing right myself.

I know the question of what to do largely comes down to my own finances (I do have enough savings) and how much the nostalgia of this machine is worth to me, but I thought I would ask here for some input as well. Any thoughts?


r/vintagesewing • • 1d ago

General Question Necchi supernova

Thumbnail
1 Upvotes

r/vintagesewing • • 2d ago

Tips & Hacks Don't throw away your old sewing machine: I fixed my Bernina Minimatic 807 with a soldering iron and a 3D printer

Thumbnail
gallery
60 Upvotes

My Bernina Minimatic 807 developed a scary fault: the motor would run with the foot pedal unplugged. A lot of people would bin a machine at that point. I really like this one, so I decided to try fixing it, even though I had never really soldered before.

What was wrong

Two things. The old suppressor had failed: when I measured it there was no resistance through it, so it was passing current it should have been blocking, and that is why the motor ran without the pedal. The carbon brushes were also worn right down.

I built a new suppressor myself and wired it in, and fitted new carbon brushes. The machine now only runs when I press the pedal.

What I printed

While I had it apart, the plastic around the motor was yellowed and brittle, so I replaced that too. Everything is printed in PETG, apart from the pad, which is TPU.

  • Motor housing. Derived from the housing sold by 3D Sewing Parts, shared with their permission. I reworked it to use heat-set inserts in place of loose nuts.
  • Brush-hole cap. A push-fit cap over the carbon-brush hole, so the brushes can be changed next time without removing the housing.
  • Mounting pad. A thin TPU pad that replaces the old rubber sheet between the housing and the machine.
  • Side panel. I modelled this one myself from the original part.

The brass pin blocks, the screws and the wiring are all reused from the original machine.

Files, with a build guide and wiring diagram

What I learned

  • Soldering is much less intimidating than it looks. Heat-set inserts are a forgiving place to start.
  • Take a photo of the wiring before you pull anything off.
  • These old machines are built to be repaired. Almost everything comes apart with a screwdriver.

One warning: this part of the machine carries mains power. Unplug it before you open it, and if you're unsure about the wiring, ask someone who knows.

If your old machine is misbehaving, it's worth a look before you replace it. Happy to answer questions.


r/vintagesewing • • 2d ago

Machine Question Clone 15 controller wire disconnected

Post image
3 Upvotes

Hello! I was wondering if anyone here has had the same experience as me. One of the wires on my speed controller has slipped out of its end. Is there a way to fix it?


r/vintagesewing • • 2d ago

General Question Sewing table heavy duty janome 580

2 Upvotes

Hi everyone!

I'm looking for recommendations for a sturdy sewing table for my vintage Janome 580, which weighs around 17kg.

It vibrates quite heavily at higher speeds, so I'm looking for something solid that won't amplify the noise or vibration.

I've been considering commercial desks with thick worktops and welded steel frames, but would love to hear what others use.

Ideally something that would also suit a newer machine if I upgrade in future.

I'm UK-based and hoping to spend around £150–£200.

Thanks so much! 😊


r/vintagesewing • • 2d ago

Machine Question Narrowed down my vintage sewing machine search! Opinions wanted!

5 Upvotes

hi everyone! I posted a week or so ago asking questions and I learned so much - so thank you!!

I have found and narrowed down my list to two options based off of comments. id love to get your opinions on the two I have come down to! just to reiterate im sewing things that are not commercially heavy duty but are giving my current machine a bit of trouble. (quilted purses/bags/quilts)

here’s the two I’m most interested in! let me know what you think is worth it most :)

homemark - $45 in a base, running, conditioned, oiled and serviced. proof that it works well in videos.

Kenmore metallic iris - $100 in cabinet with all original accessories, running, tore apart, cleaned, serviced and oiled.

Processing img no43pb8ccz1i1...

Processing img 474hdb8ccz1i1...


r/vintagesewing • • 3d ago

General Question Irish Victorian Era Crazy Quilt Patch (1893)

Thumbnail
gallery
48 Upvotes

I have very little information on this piece as I picked it up in a charity shop the other day for 20 cents!! It appears to all be hand stitched and seems to have a bit of silk work in 3 or so places. There is a large amount of Irish motifs within this piece of fabric including shamrocks, a golden harp and Irish wolfhounds, among more, which is quite an unusual thing to come across from what I've researched. This piece is dated 1893 on the top and contains a name that reads ADA in a typical font from the Victorian era. If anyone can tell me anything about it at all I would be very appreciative and interested!!

(EDIT) Upon further research I believe that Ada might be the name of a child who was born in 1893 as from what I've seen in the Irish census from 1901 there was an Ada Smylie that would have been born that year. She was 8 years old in 1901, she was born and raised in the county that I also bought this in so it all adds up!!


r/vintagesewing • • 2d ago

Machine Question I GOT THE SINGER 500A

9 Upvotes

NEVERMIND 😭🙃🙃🙃🙃

Hello! I posted the other day asking if I should get a kenmore 566 or a singer 503a, turns out I was mistaken and it was a singer 500a but regardless I went for it and it arrives tomorrow!!!

It looks to be in great and beautiful condition based on the pictures posted and they state it’s in working order but hasn’t been used in some time

My question is, I know a machine that hasn’t been in use a while can sound loud and clunky and the rocketeers need to be ran a bit to prevent it from locking up

How can I make sure I lube and oil it properly so it doesn’t sound too loud and clunky? If you have one or similar does yours sound loud regardless??

Im asking because I live in an apartment and my next door neighbors can be weird when it comes to sounds of daily living let alone louder sounds and i honestly don’t want to hear her complaining and yelling through the walls about me using it during the day

Update!: the guy sold it to someone else… he was supposed to deliver it to me today but this morning said he got confused and sold it already, there’s supposedly another machine available and it might be a singer 500a but they have it away and need to take it out to check it

They’ll send me videos and pictures of it but I’ve lost all trust


r/vintagesewing • • 3d ago

WIP A gift from a coworker

Thumbnail
gallery
162 Upvotes

I'm in love


r/vintagesewing • • 2d ago

General Question Husqvarna card reader issues

Thumbnail
1 Upvotes

r/vintagesewing • • 2d ago

Machine Question Presser foot type for a Morse 4300?

1 Upvotes

I'm looking to get a few common presser feet for my Morse 4300. I'm doing Boat bags, boat upholstery and some sails, nothing fancy needed.

What type of presser feet does the Morse take?

What are the most common ones that people use a lot?


r/vintagesewing • • 3d ago

WIP me irl

Post image
21 Upvotes

r/vintagesewing • • 2d ago

Machine Question Does my 401a need a new motor?

13 Upvotes

Does this sound and delayed motion on my Singer 401a indicate I need to replace the motor? The machine’s been sitting unused for six months or a year; the woman I got it from said she cleaned it up and oiled it and replaced the light and such. I’m new to sewing machines (not an experienced sewer) but my brother thought it was a problem with the motor.


r/vintagesewing • • 2d ago

Machine Question Sewing machine issues

3 Upvotes

I have had this machine for a while never really used it much, it was working great when I pulled it out , got it all oiled according to manual and then changed the thread length lever to a longer stitch and now it is sooo slow! This is me putting foot pedal down the entire way. First it was just backstitch (that was my first time figuring out how to backstitch) and now the forward stitch is doing the same.

Can anyone give me suggestions? I have oiled both top inside and bottom, and cleaned it


r/vintagesewing • • 2d ago

General Question Seeking advice or experience with an Elna Mk.2 Supermatic (1956) - do I use or sell?

2 Upvotes

Hi, everyone.

I'm an aspiring menswear garment designer currently in training and I came across this stunning 1950s Elna at a second hand shop, I suspect donated from a decreased estate because it was in great condition with all of its original booklets, bakelite sewing pattern wheels and carry box. It was last sold in 2003 for $200 - the receipt was in the box.

I do not own a foot peddle converted to modern Australian appliance standards so I have not tested the machine yet, but assuming it works, is a machine of this vintage a good choice for a beginner sewer or would I be better off selling it to a collector and buying some other supplies?

I am trying to weight up the practical difficulties versus losing out on a really beautiful and rare machine.

Any thoughts or personal experiences would be appreciated.


r/vintagesewing • • 3d ago

General Question Gonna be picking up this Singer 66 soon, general questions

Thumbnail
gallery
8 Upvotes

Hi!

My friend is cleaning out some storage at his family's place. They dont want this Singer 66, so if I can transport it back its mine.

He says that it is functional, but it needs a new belt (not sure which belt). It probably needs a general servicing.

My questions:

1) I've read the motors can be serviced, I plan on doing that. But as far as updating the electronics, what am I probably going to need to do? Im not sure how safe the plug and wiring is, Id rather just replace it all. How big of a task is this?

2) Im not sure if the table came standard with these guys. If it did, and you recognize it, can it be disassembled? I have a Mazda3. Im sure i can fit it in there if i can take off the legs.

3) Any general advice on servicing? I've already looked a bit. I dont think i am going to go all out and repaint it. If i see rust ill adress it, but I like the patina.

Thanks!