r/vintagesewing • u/sweetdancer68 • 17h ago
Patterns Vintage Cranston cut and sew panel- mini Christmas tree and tree skirt!
Found for dirt cheap at local creative reuse store:)
r/vintagesewing • u/sweetdancer68 • 17h ago
Found for dirt cheap at local creative reuse store:)
r/vintagesewing • u/Moldy_slug • 11h ago
A secondhand shop near me is selling this singer 31-20. The machine came from a local cobbler who retired recently. It moves freely when I spin the hand wheel, presser foot raises and lowers, seems to be in ok shape mechanically. Not sure if the motor runs, but I’d want to convert it back to treadle anyway.
he’s asking $250. That seems high to me. What would be a fair counter offer?
Also, How does the 31-20 compare to a 15-91? Other than the obvious difference in harp space of course! I’d like to occasionally sew things like canvas tote bags or heavy jeans with flat felled seams that are just a *little* too much for my 15. Would it be easier in this machine? And notable pros/cons?
Thanks!
r/vintagesewing • u/Natural_Ocelot2241 • 9h ago
Adjusting bobbin case timing - I swear I've done this before but now every time I try to move it the needle moves with it.
I know normally you'd go through the throat plate but the screws on the throat plate holding the feed dogs in are completely stuck.
(if any of this is off I'm writing this on behalf of my brother - who is also a beginner 😅 many thanks for your help)
The sewing machine was working before this - it jammed
r/vintagesewing • u/LegacyElite84 • 3h ago
Hi all. On the tail end of restoring a 237 I got off of Marketplace that was completely frozen. I noticed that the upper tension gear was cracked, and was about to CAD up a model to print, but then I had a serious question I can't figure out.
Is there any reason this part is shaped like a gear and not just a cylinder as a spacer? It's the same thing on my 301 to where it's a gear. Is there anything at all that interacts with this gear? Is this just a vestigial design from much older machines (oldest I've worked on so far was the 301)? The gear doesn't even move when everything is installed and I'm just perplexed as to why there's a gear there.
r/vintagesewing • u/SisterInScion • 4h ago
r/vintagesewing • u/silenced_divinity • 16h ago
Hey everyone I purchased a kenmore 158.15150 recently and inside the cam slot was a decorative cam rather than the zigzag cam that usually comes with the machine. I've been looking for one everywhere but I can't seem to find one. If anyone knows where I can find one, if anyone has one that they're willing to sell I'd gladly take it or if anyone has a 3D print file STL for it I would greatly appreciate it.
r/vintagesewing • u/Quiet-Mulberry-6886 • 6h ago
r/vintagesewing • u/greenochre • 23h ago
So, I'm trying to fine tune my Elna SU 62c. I thought I was close, but then I bought new threads and everything went astray. After a lot of fiddling, nearly breaking top tension mechanism figuring out how to fix my mistakes and making makeshift weights with kitchen scales and some used batteries to test tension I have a pretty good result. It's certainly the best of all previous attempts, but I still can see a little bit of bottom thread on the top and the little bit if top on the bottom, especially when using Elna disks.
The tip thread is dark green, and the spool thread is red. What do you all think?
r/vintagesewing • u/Initial_Departure_74 • 1d ago
hope this fits here, working on mccalls 8137 which is listed as an 1800 greatcoat pattern
r/vintagesewing • u/itsmalbro • 2d ago
Im very interested in buy this machine. It's missing the belt nbd. It's in great shape and it looks like it has all the parts. Does anyone see something I'm missing that would be a red flag? Asking $250
r/vintagesewing • u/Personal-Inspector52 • 1d ago
Initially wanted to start learning how to sew for next years goal and low and behold i found this at the thrift. Do you think this is good beginner? It seems like there is some missing pieces.
Bought it for $35!
r/vintagesewing • u/EvenInRed • 1d ago
just bought a machine off an old lady, seems to work enough just feels like the belt doesnt have enough traction for the motor or something.
So I wanna ask y'all, how do you find an old belt? Tried looking in the manual, googling the words stated in the parts list section "6902 rubber belt" with the 6902 being the "parts number"
do i just gotta bring the belt with me to a hardware supply shop and hope they have the right size?
r/vintagesewing • u/nic_theteen • 2d ago
hello! my mom recently gave me this sowing machine her mom gave her. It’s labeled dressmaker and it’s very old fashioned compared to newer sowing machines. it didn’t come with a manuel and any search i do for the manual comes up empty.
I was doing just fine with a few youtube tutorials and even made a costume recently. however last night i set it up as usual but it wasn’t actually stitching anything.
the top thread kept looping at the bottom of the fabric and then getting stuck in the under the dog teeth IN the bobbin holder. and my bottom thread wasn’t stitching at all so any top thread that would ‘stitch’ would come undone.
i’ve tried tightening the tension as was recommended by wiki how for thicker projects. It might be my needle as it is a 14 and not a 16 and the fabric i was using is thick. any tips or suggestions? i’ve rlly liked sowing since i’ve got this machine but what it doesn’t work i have no idea what it means or how to fix it.
any feedback is appreciated thank you ! i’ve added a photo of my machine incase anyone recognizes it !
r/vintagesewing • u/Shot-Ninja-601 • 1d ago
Hello everyone,
I’m trying to locate a replacement screw for my mother’s vintage Sears Kenmore sewing machine, model 158.18024. She is currently using duct tape to hold the part on, and I want to surprise her by fixing it.
According to the Sears parts diagram, it’s item #16, part number 2362, identified as a set screw.
The screw attaches a small metal retaining bracket to the underside of the removable top cover.
I’ve measured an identical screw from the same bracket assembly using digital calipers, to the best of my ability…
Measurements:
I’ve considered an M3.5 × 0.6 screw, but I haven’t confirmed that the threads match.
I’m hoping someone can help me with one of three things:
I am providing photographs of a matching original screw and the mounting location.
Any assistance would be greatly appreciated.
Thank you!



r/vintagesewing • u/purplepinkpiano • 2d ago
I am a complete beginner and know absolutely nothing about sewing machines or sewing. But as I’ve been looking up good starter machines, I came across the Kenmore 158s and really like them.
I’ve been looking at FB marketplace and found this one. Is this a good deal??
It’s $100.
Description says: This is all metal and heavy. Tested and works. Very durable from 60/70’s
Could use a cleaning
Is “could use a cleaning” code for “I need to get it serviced” or does that literally mean it just needs a wipe down?
Thanks so much!!
r/vintagesewing • u/ErrorKooky5637 • 2d ago
My mom has two sewing machines, both are Bernina 1530. I know these can vary in price, but are worth more than the average sewing machine. Question. Where is the best place to sell these and get a fair price for them? Thank you Here is my flair!
r/vintagesewing • u/honeyjars • 2d ago
I'm leaning to sew on my grandmother's Singer 648 Touch & Sew. It's in great condition aside from the gears. Two nylon gears broke and I ordered a full new set. In the process of replacing the gears I'm stuck unable to get the roll pin out of the top vertical gear (already tried roll pin punch and penetrating oil). Local sewing shop wants $125 to remove the roll pin only, $290 to complete the full 5 gears replacement and reset timing.
I've watched a bunch of YouTube videos and I feel pretty confident about the gear replacements but doing the timing myself I'm unsure of. Videos make it look easy but the shop says it could be difficult. The internet doesn't seem to come to a consensus one way or the other. I'd hate to pay the $125 and then have to pay $290 on top if I can't get the timing right myself.
I know the question of what to do largely comes down to my own finances (I do have enough savings) and how much the nostalgia of this machine is worth to me, but I thought I would ask here for some input as well. Any thoughts?
r/vintagesewing • u/Warm_Refrigerator730 • 2d ago
r/vintagesewing • u/Scrubb3rs • 3d ago
My Bernina Minimatic 807 developed a scary fault: the motor would run with the foot pedal unplugged. A lot of people would bin a machine at that point. I really like this one, so I decided to try fixing it, even though I had never really soldered before.
What was wrong
Two things. The old suppressor had failed: when I measured it there was no resistance through it, so it was passing current it should have been blocking, and that is why the motor ran without the pedal. The carbon brushes were also worn right down.
I built a new suppressor myself and wired it in, and fitted new carbon brushes. The machine now only runs when I press the pedal.
What I printed
While I had it apart, the plastic around the motor was yellowed and brittle, so I replaced that too. Everything is printed in PETG, apart from the pad, which is TPU.
The brass pin blocks, the screws and the wiring are all reused from the original machine.
Files, with a build guide and wiring diagram
What I learned
One warning: this part of the machine carries mains power. Unplug it before you open it, and if you're unsure about the wiring, ask someone who knows.
If your old machine is misbehaving, it's worth a look before you replace it. Happy to answer questions.
r/vintagesewing • u/Walkingpants24 • 2d ago
Hello! I was wondering if anyone here has had the same experience as me. One of the wires on my speed controller has slipped out of its end. Is there a way to fix it?
r/vintagesewing • u/Misssoni • 2d ago
Hi everyone!
I'm looking for recommendations for a sturdy sewing table for my vintage Janome 580, which weighs around 17kg.
It vibrates quite heavily at higher speeds, so I'm looking for something solid that won't amplify the noise or vibration.
I've been considering commercial desks with thick worktops and welded steel frames, but would love to hear what others use.
Ideally something that would also suit a newer machine if I upgrade in future.
I'm UK-based and hoping to spend around £150–£200.
Thanks so much! 😊
r/vintagesewing • u/AutomaticAge7494 • 3d ago
hi everyone! I posted a week or so ago asking questions and I learned so much - so thank you!!
I have found and narrowed down my list to two options based off of comments. id love to get your opinions on the two I have come down to! just to reiterate im sewing things that are not commercially heavy duty but are giving my current machine a bit of trouble. (quilted purses/bags/quilts)
here’s the two I’m most interested in! let me know what you think is worth it most :)
homemark - $45 in a base, running, conditioned, oiled and serviced. proof that it works well in videos.
Kenmore metallic iris - $100 in cabinet with all original accessories, running, tore apart, cleaned, serviced and oiled.


r/vintagesewing • u/Effective_Bet7086 • 3d ago
I have very little information on this piece as I picked it up in a charity shop the other day for 20 cents!! It appears to all be hand stitched and seems to have a bit of silk work in 3 or so places. There is a large amount of Irish motifs within this piece of fabric including shamrocks, a golden harp and Irish wolfhounds, among more, which is quite an unusual thing to come across from what I've researched. This piece is dated 1893 on the top and contains a name that reads ADA in a typical font from the Victorian era. If anyone can tell me anything about it at all I would be very appreciative and interested!!
(EDIT) Upon further research I believe that Ada might be the name of a child who was born in 1893 as from what I've seen in the Irish census from 1901 there was an Ada Smylie that would have been born that year. She was 8 years old in 1901, she was born and raised in the county that I also bought this in so it all adds up!!
r/vintagesewing • u/DuckyDuckyMo • 3d ago
NEVERMIND 😭🙃🙃🙃🙃
Hello! I posted the other day asking if I should get a kenmore 566 or a singer 503a, turns out I was mistaken and it was a singer 500a but regardless I went for it and it arrives tomorrow!!!
It looks to be in great and beautiful condition based on the pictures posted and they state it’s in working order but hasn’t been used in some time
My question is, I know a machine that hasn’t been in use a while can sound loud and clunky and the rocketeers need to be ran a bit to prevent it from locking up
How can I make sure I lube and oil it properly so it doesn’t sound too loud and clunky? If you have one or similar does yours sound loud regardless??
Im asking because I live in an apartment and my next door neighbors can be weird when it comes to sounds of daily living let alone louder sounds and i honestly don’t want to hear her complaining and yelling through the walls about me using it during the day
Update!: the guy sold it to someone else… he was supposed to deliver it to me today but this morning said he got confused and sold it already, there’s supposedly another machine available and it might be a singer 500a but they have it away and need to take it out to check it
They’ll send me videos and pictures of it but I’ve lost all trust