r/AnalogCommunity • • 9m ago

Discussion Expired film rules

Thumbnail
gallery
1 Upvotes

I’ve been experimenting with expired film and I’m curious how everyone approaches it. I’ve heard the general rule of adding one stop of exposure for every decade past expiration, but I know storage conditions, film stock, and ISO can make a big difference.
Do you follow that rule, bracket your exposures, or just shoot at box speed and see what happens?
I’d love to hear what’s actually worked for you, especially with expired color negative film.


r/AnalogCommunity • • 12m ago

Repair Fungus on Olympus OM-1 mirror

Post image
1 Upvotes

I want to get a second opinion of this mark on my Olympus OM-1’s mirror, which I believe to be a fungus. I’ve tried gently running over the area with a modern sensor cleaning swab to no effect, and currently I have it sitting in indirect sunlight. The mark is flush to the surface (does not stick out).

Is this fungus? And if so is there anything else I can try to clean/kill it?


r/AnalogCommunity • • 16m ago

DIY Om-1 shoe mount screw specs

1 Upvotes

I was working on a DIY 3d printable cold shoe mount for the OM-1 because the Olympus shoe accessories are rather pricey to buy used and in short supply. I tried a couple different screws and then ultimately bit the bullet and got a used OEM shoe accessory. It seems to be 3mm and the thread is reversed but I can't tell the pitch. I searched the internet far and wide but sadly could not find anything concrete on the spec of the screw used. I didn't realize it was reverse thread before I got the OEM unit so I had just tried standard M3 and M3.5 screws to no avail.

Idk how many folks care about this but I already did a bunch of modeling and prototyping so figured I'd try and see things through. Any ideas? I was thinking ideally I need to find a screw of this spec available on a global online retailer like Amazon so folks can get the same hardware.

If nobody here knows Im also thinking of posting a high quality macro shot of the screw itself to a machinist subreddit and seeing if anybody there can eyeball it.


r/AnalogCommunity • • 23m ago

Discussion Canon EOS 3 trigger

1 Upvotes

Anyone know if this camera can take modern Godox triggers for modern Godox strobes?
I just purchased this camera off eBay and am wanting to shoot off camera flash.
New to the analog workflow but very experienced in mirrorless and shooting with strobes. Thank you


r/AnalogCommunity • • 43m ago

Discussion Recordak Junior Model JC

Thumbnail
gallery
4 Upvotes

Can anyone give me any more info on this? I’m guessing this was some kind of microfilm reader or camera? Apologies for the poor pictures as this is in an office basement with poor lighting. Thanks in advance!


r/AnalogCommunity • • 54m ago

Gear Shots Obsessed with my film journey...

Post image
15 Upvotes

Decades ago (as my friend used to say, in the "dim times") as a young man and budding photographer, I dreamed of one day owning the top of the line Canon SLR, the F-1. Over fifty years later, I finally own one, and I can't take my eyes off her. She feels like she could stop a bullet or drive a nail. And now that she's been cleaned up and serviced, I can't wait to feel what she can do on the streets. She still needs a little TLC. Her meter is pretty far off. The battery (an alkaline 6V) seems to be strong, but I'll replace it with a lithium cell and maybe that'll help. Her shutter release is also a little laggy. Stay tuned. :-)


r/AnalogCommunity • • 2h ago

Discussion What camera should I buy as my first ever film camera?

0 Upvotes

I want a PNS camera for taking picture on occasions for fun and memory. Should I get a old 90's camera or a new one like Kodak EC35? I want a grainy, warm, cozy vibe with my pics


r/AnalogCommunity • • 2h ago

Gear Shots Lost my light, grabbed a beer

Post image
22 Upvotes

These early sunsets are a bit of a pain since I got back into shooting! On this day I was wandering the Santa Fe area of Denver, I like urban landscapes and especially alleys. You can always find something there worth documenting. Lost the last bit of light at the right spot…


r/AnalogCommunity • • 2h ago

Discussion Anyone here have experience post processing Super 8mm?

2 Upvotes

I'm working on digitizing my families old Super 8 film. I have most of them digitized and now I'm looking at what I can do to improve them a bit.

I have very little Premiere Pro experience but I'm already starting to play around with Warp Stabilization. In my first few attempts, I noticed that it does a lot of cropping, so I've started playing around with the settings to improve that.

I'm hoping to hear from some others to have been down this road.

Have you messed around with color correction? What are your preferred settings for stabilizing? Have you done anything to help clean up the image a bit more?

Has anyone dabbled in AI upscaling? I know the image is a bit shit so shit in = shit out so it may not be worth it.

I know the film is 50 years old at this point so I can only take it so far.

In case anyone is curious, here's a RAW sample straight from the digitizer and here's my first attempt at stabilizing. You can see how much it crops by default.


r/AnalogCommunity • • 3h ago

Scanning Do Film Scanners Dream of Electric Sheep?

23 Upvotes

Using the GT-X830, I performed repeated scans of the same frame to measure the noise (σ_D) within the density space.

While the noise remains low—σ_D ≤ 0.01—up to a density (D) of 2, it degrades significantly to 0.287 in the D 3–4 range. Achieving an average noise level of σ_D = 0.02 for the D 3–4 range would require approximately 200 passes, totaling 40 hours.

I also consulted the manufacturer, who confirmed that there is no way to adjust the integration time or analog gain.

Consequently, I am building my own scanner that allows for manual control over exposure. The design repurposes the sensor from a commercial unit while replacing the control board with one of my own creation.

Further details are available on Qiita (link in the comments).

i wrote this in Japanese, and translate by google.


r/AnalogCommunity • • 4h ago

Discussion Which would you prefer Nikon F2 or FM2 or Pentax Spotmatic

7 Upvotes

The argument Ive searched thru google is both good, hard to focus without the waist view finder (F2) and FM is way cheaper than F2 but has 1/4000 if Im not wrong. I cant decide either of the two. Tho the spotmatic has M42 lenses and compact also fully mechanical

what would you get? considering all three are in good condition


r/AnalogCommunity • • 5h ago

Repair I am stupid, lesson learned, I guess.

Thumbnail
gallery
0 Upvotes

Took my catalog for rescan of few strips and was keeping it on table. Brought some coffee, good mood to do some scanning. Of course this happened. While I talked to ai and understood that I needed to remove these from sleeves ASAP, they got stuck. Solution now is to soak them, remove 1 by 1, hope for the best, dry them and then catalog again. Now that sounds like a project! Currently feel so stupid, but coffee happens, I’ll try to enjoy this part of analog process too.


r/AnalogCommunity • • 6h ago

Gear Shots Ricoh FF70 for $50

Thumbnail
gallery
9 Upvotes

Bought camera a day before a trip. Camera appeared to be faulty and skipped few frames, but I enjoyed this it a lot. Have used Portra 400, Color Plus and Fujicolor 200. Color Plus looking underexposed and doesn't suit cloudy weather even during the day. It came as a surprise as I used this film with og mju and results was great.


r/AnalogCommunity • • 6h ago

Repair Redoing gaskets on an Olympus XA2

Thumbnail drive.google.com
0 Upvotes

I recently found my dads old camera (An Olympus XA2) and i would like to start using it. I took it to a shop to see if it was still working and there I was told that i would have to shoot a roll to see if everything was ok but they could already tell that the gaskets would need to be redone

I shot a roll of Kodak ColorPlus200 and everything else seems to be in order and i was wondering if redoing the gaskets is necessary or if it would give noticeably better results since money is a little tight.

The only thing that seems wrong a purple hue but i can't tell if anything else is wrong or if its supposed to be different

Here are some photos i took with the roll of ColorPlus i took(on drive because the files were too heavy)

https://drive.google.com/drive/folders/1b6I1DvMvjeePAxybymD6w-pgTrFlwcqg


r/AnalogCommunity • • 8h ago

Discussion Nikon FA or Canon A-1?

5 Upvotes

Which would you buy?


r/AnalogCommunity • • 9h ago

Scanning Film photo storage (vintage/old) - keep or change?

1 Upvotes

No idea if this is the right community for this and I apologize if it isn't but google led me here. My elderly parents have tons of old photo albums. The photos are kind of stuck down on sticky paper with a like, plastic film on top of them. Hopefully someone knows what I'm referring to. It's not a scrapbook where you glue or tape in items, it's like the whole page is pre-glued or something sort of? Anyway, TONS of these albums and I need to figure out scanning them all and storing them. Does anyone know if it's best to scan them directly from the albums and keep them adhered to the pages or do I try to remove the photos and scan them and A) put them back on the pages or B) keep them stored some other way? I'm worried the backs of the photos might be sticky if I try to keep the photos stored another way? Feeling very overwhelmed but want to digitize these for family and then store them safely somehow. I am willing to invest in a scanner or other items necessary to do this correctly and will have some time off work for Thanksgiving. Just don't want to mess this up for them, as a lot of prior family items were lost to fires and other family uh, drama, shall we say. Appreciate any help or being pointed to a different community if this is not appropriate for this one. I have searched but I just keep getting things that turn out to be ads for photo scanning apps and stuff that includes photos stored in shoeboxes and not sticky albums. TIA.


r/AnalogCommunity • • 10h ago

Discussion Affordable, basic (but not barebones) film camera?

0 Upvotes

Hi Reddit, I'm looking to buy my younger brother a film camera for Christmas. He's never shot on film, but he has a passion for it, and I'd like to help him along.

I've been looking for an affordable film camera, preferably new, and so far the options have been either cheap & barebones or obnoxiously expensive. There doesn't seem to be an inbetween. It's like you jump from baby's first film camera to $500 options

One option I was looking at: the KODAK Snapic A1 is $100 on Amazon. But it's pretty limited. No zoom, no manual way to adjust aperture or shutter speed, and the focus is just 2 settings: near and far.

I'm not interested in getting him something too basic, that would hold back his growth. Ideally I'd like to get him a camera that he can practice the technical fundamentals of photography on , but other than that, it doesn't need any fancy/gimmicky features.

Lastly, I don't have a ton of money, $200 is my ceiling.

Are any of you aware of any basic, but not barebones, cameras that add a few more features than the KODAK Snapic, but don't have a stratospheric price tags? Ideally I'm looking for new cameras, but I'm willing to compromise and get something used if there are no other options

Thanks,

-Mr. Questions


r/AnalogCommunity • • 10h ago

Gear Shots Nikon SP

Thumbnail
gallery
7 Upvotes

I try to be modest day to day but I will make an exception for this camera. I have through lots of luck and genuinely kind people acquired this all in the span of about a month and all for pretty bargain prices. This all started because of the Nikkor - W 35mm F: 3.5 lens mounted on this camera. I realize its kinda like a tumor, it starts out small but then causes more financial investment and now has caused a camera to grow around the lens. Anyways I got really lucky and the guy sold it thinking it was just a extension tube or something. The SP here has a cloth shutter and is a pretty early example, the original prism had desilvering in the main finder but I got very lucky and met someone who had one on his spare parts body. The 35mm lens was not without issue though, that one had water get into it at some point and it had rusted the aperture blades somehow but I got very lucky and it was only light stuff. I took it all apart and the blades cleaned up with a little lighter fluid. The 50mm F1.4 came with the SP when I got it, its all there but the back element is a little scratched up and I have no idea where to get another one for this camera so I might just sell it off and find one in better shape. Who knows, thats the end of the camera info.

I have a roll of Cinestill 800t loaded only because I end up going out late at night more than daytime lately. I guess that is my test roll which is crazy to say. But I think the camera will work fine and I am very excited to make this my new workhorse. The case only came in the bottom half and it was pretty beat up. I wiped it down a bit then put leather conditioner on it. Should extend the life a little bit hopefully.


r/AnalogCommunity • • 11h ago

Gear Shots I just really wanted to show off this beauty 😌🫰🏼

Post image
78 Upvotes

Scored this one for a whooping 150$ and it came with a

- Tokina RMC Tele-Auto 135 mm f/2,8

- Tokina RMC 35-105 mm f/3,5-4,3

- Vivitar MC Macro Focusing Zoom 75-300 mm f/4,5-5,6

- 2x CFE Teleplus teleconverter

AND a Nissin Capital D400Ti lightmeter!

The catch was that the camera was sold untested, but after a quick check, it fired up! I'm yet to test it with film.


r/AnalogCommunity • • 14h ago

Troubleshooting - Gear Broken Yashica T4 Super Weatherproof Film Door

1 Upvotes

Like the title says, I have a Yashica T4 Super Weatherproof with a broken film door. The hooks that keep it closed are gone. I've been using it with gaffer's tape keeping it closed for a while, but it's become one of my favorite cameras and I want to repair it. The only problem is I can't find any donor cameras to steal a door from! With that option out the window, does anybody else have any suggestions on how to fix this?

Also, for some context, this camera used to be my father's. When we were cleaning out our childhood home I found it and decided to give it a try, despite the broken door, and I'm glad I did. This thing effortlessly takes awesome pictures every time I turn it on.


r/AnalogCommunity • • 15h ago

Darkroom What happened to my Adonal?

Thumbnail
gallery
10 Upvotes

Hey, so I bought this Adox Kit in september and now it has exploded.

I only used this adonal bottle once and it was all tightly sealed... or so I thought.

I was away from home for a while and never even remembered to check the bottles since my CS-41 color devs are doing all fine in their bottles.

I had it in a corner of my room in the bag it came in, next to some film cannisters I turned into keychains. The bag was open btw and it isn't leaking when I press the bottle. Everything was covered in developer. Really weird.

Does anyone know how this may have happened?


r/AnalogCommunity • • 16h ago

Troubleshooting - Gear Need help with my Pen D

Thumbnail
gallery
1 Upvotes

I hope I could get some help.

I bought an Olympus Pen D last year and I was able to use almost a full roll with it and parked it with the film inside while waiting for an event to use up all the film.

6 months later, the rewind lever would not work. I assumed the film was exhausted so I removed the film. Rewind wheel still would not work. So does the shutter button. (I'm assuming because it is not rewound). I removed the top cover to check if there is a jam but I didn't find anything. Sharing some pictures I took of the camera.

(Last picture: this button pushes in and springs out which is normal)

I really hope someone could help out.

Thank you.


r/AnalogCommunity • • 16h ago

Troubleshooting - Photos Film stock and settings advice for a rehearsal dinner: 35mm, Minolta X-700

0 Upvotes

Hello!

I have been asked to help shoot some pictures for a friend’s wedding rehearsal dinner on my film camera and I just wanted some recommendations on film stocks and maybe some settings advice.

I have shot on a Minolta X-700 for the past two years on a variety of stocks, and I absolutely love it. Including: Kodak Color Plus 200, Kodak Gold 200, Kodak UltraMax 400, Kodak Ektar 100, Portra 800, Candido 800, Kentmere Pan B&W 200/400, Fujifilm 200/400/800.

I loved all of these but have generally miscalculated as to what stocks I should use in certain settings. I’m always getting really shaky/blurry shots, mostly from trying to shoot indoors with too low of an iso. For this rehearsal dinner- it will be nighttime and mostly indoors. Somewhat fluorescent lighting and outdoor patio area type deal.
- luckyrabbitbar.com (here’s the place). Any recs on what stock would be pretty/steady would be awesome! I love lush colors film provides and don’t shoot in B&W a lot.

I also would love some recommendations as to what settings I could adjust on the camera with to adjust for the settings. Admittedly, I have been a “AUTO” warrior with this camera for a while. I’ve gotten some great shots on this with not really playing around with the settings, but I’m wanting to learn more. Anyone with some Minolta experience and tips would be greatly appreciated.

Thank you!


r/AnalogCommunity • • 16h ago

Discussion It came today!

Thumbnail
gallery
66 Upvotes

It finally came after about a month. I guess that isn't too long a wait considering how hard it is to get it. Maybe I'll put one into my Fuji GA645zi fittingly enough.