r/Machinists • • Apr 10 '26

Buy/Sell/Trade megathread. Post your classified ads here! NO COMMERCIAL ADVERTISING.

15 Upvotes

We have decided to permit personal classified ads here (and only in here) without requiring moderator permission first. Machine shops looking to sell a used machine or tools etc. are also permitted to post here.

Please provide as much information as possible up front for potential buyers. Prices and pictures MUST be included in your post. Linking images off-site is fine (e.g. imgur.com). Please delete (or mark your post as sold) once a sale is complete or if the item is no longer available.

Commercial advertising of products and services is NOT permitted here. This rule will be strictly enforced.

NO CARBIDE SCRAPPERS. You WILL be permanently banned on sight.

You can also try /r/MachinistToolsForSale


r/Machinists • • 1h ago

Safety glasses. Bun. Everybody happy now!? šŸ˜†

Post image
664 Upvotes

Just in time for the draw bar to fully shit the bed, so the Trak's out of commission... šŸ™„


r/Machinists • • 2h ago

Snapped my first tap today. And my second. Goddammit.

Thumbnail
gallery
105 Upvotes

Got one successful hole, broke two taps. It's 1/4-20. One snapped power tapping on the bridgeport even with the chuck not very tight (which i knew was dumb but i felt lucky) and one snapped by hand using only 3 fingers to turn the damn thing. I wonder if someone had already damaged the things, or if this piece from the shorts rack was not the type of steel it should've been. I've power tapped M3 threads in wood and sheet metal with a drill before (obviously thick blocks of steel are different but still) and not had issues so i feel like a real dumbass right now. This is the 5th or 6th part of a personal project, i might start this part over or we may burn them out with the EDM. I'm sure I'll do it plenty more times and at least my first time was on my own project instead of an assignment.


r/Machinists • • 17h ago

It's so nice to get out of the QC lab and run a mill for a while!

Post image
1.3k Upvotes

r/Machinists • • 4h ago

Shitpost Close call

58 Upvotes

Clearance is clearance. It either touches or it doesn't.šŸ˜†


r/Machinists • • 4h ago

Finally got my 16ā€ southbend lathe home, and surprised with its capabilities!

28 Upvotes

For context, I a have a 1942 southbend 8117D lathe that has the original 1-1/2hp dual voltage 3 phase motor wired for 220v with a peak amp draw of 4.8ams according to the motor plate. I have it running on a VFD that takes 110v and converts it to 220v 3 phase that’s rated for a 2hp motor, after some adjustments to the belts tension to remove the slipping, I am please to say this is taking a 110 thou depth of cut at 390rpm and a feed of .0105 feed rate for the power feed without struggling on steel


r/Machinists • • 1h ago

My coworkers setup

Post image
12 Upvotes

Pretty smart if you ask me


r/Machinists • • 3h ago

QUESTION Math question

Post image
15 Upvotes

Im making a sine fixture for my Harig spin fixture. How do I calculate the arc/radius needed for the swing/lock arm?


r/Machinists • • 3h ago

Turned this threaded rod today. How’s the surface finish looking? šŸ‘€

10 Upvotes

Fresh off the lathe! What do you guys think of the finish? Anything you'd improve?


r/Machinists • • 12h ago

How do you deal with good employees who keep breaking expensive equipment?

48 Upvotes

I run a small engineering/manufacturing business, and I’m having an issue with employees damaging expensive metrology equipment and other people’s tools. These aren’t necessarily bad employees. Some are genuinely good at their jobs, which makes the situation more difficult.

When I was an apprentice, there was an unwritten rule that if you broke another tradesman’s tools through carelessness, you were expected to replace them. It taught you to respect other people’s property. Obviously, times have changed, and as an employer, I can’t simply expect employees to pay for damaged equipment.

I’m not talking about genuine accidents. Those happen, and that’s part of running a business. I’m talking about avoidable damage caused by people not taking sufficient care.

How a workshop handle this?


r/Machinists • • 22h ago

Race to the Bottom HR: Leave me alone.

226 Upvotes

Leave me alone while I’m balls deep in a project, proving out a program on a lathe and handling code.

Your position isn’t sacred. I do not care. Come back when I’m not busy. Thanks.

Anybody else have management that has absolutely zero respect/understanding that distracting a machinist can have catastrophic consequences? I had to start back at square one this morning over a completely useless interaction with HR. Just ranting.


r/Machinists • • 14h ago

Grandpas tap, die and handle box. Forgot I even had it. Most going into my tool box!

Post image
26 Upvotes

r/Machinists • • 12h ago

How do you Turn Long shafts?

Thumbnail
gallery
11 Upvotes

Hi folks,

I wanted to ask the hivemind If there is a way to Turn a Long shaft in one go, without having to Reposition the steady in Order to avoid steps/visible seams.

I know there are following steadies and we even have one for this machine but to Turn the whole length (610mm, length of the Stock is 650mm) wont be possible due to Clearance. Is there a Trick i am Not seeing or do i have to live with it?

Also i tried turning the Last third without the steady (since there is no room for it) but it vibrated severely...


r/Machinists • • 23h ago

How would you machine this part?

Thumbnail
gallery
81 Upvotes

This is a cap for a shock absorber. Aluminum 6061. It has several lathe operation that are no problem. The milling operation are a headache because my CNC mill doesn't have a tool change. I made a fixture for it but still changing tools is taking a lot of time. (Also I have only 3 holders so I have to change the endmills too and offset them again).Ā on top of all that the surface finish is awful.

Right now my strategy consists of 8 operations:

  1. Roughing one side with 20mm endmill area clearance
  2. Finishing with 6mm ball nose pattern project

Turn 180 deg.

3. Roughing the other simiar

4. Finishing the other side simiar

5. Finishing the bearing seat 6mm endmill zlevel

6. Grooving for the internal ring

Turn 90 deg.

7. Drilling 7mm

8. Rough & Finish the hole 6mm endmill zlevelĀ 

Also a logo will be machined later so that's 9 operations.

The hole is for a thread that will be tapped manually.


r/Machinists • • 17h ago

QUESTION Ingersoll Gold Twin

Post image
30 Upvotes

Anyone use these indexable drills with a center pilot style insert? Any other brands that make something similar in ~1.250" diameter 5xd+

The self centering at longer depths is pretty great for stability. And they are a true 2 flute so feeds can be higher


r/Machinists • • 3h ago

Shitpost Your CAT40 tool vs the one she tells you not to worry about.

Post image
2 Upvotes

r/Machinists • • 7h ago

Mazak FJV250 atc arm back lash

4 Upvotes

Our 2002 Mazak FJV 250 has started throwing tools out of the ATC arm, the arm is solid at home position but when off home as shown In the video there’s play in the cam box. I’ve not got much experience with these but I’m guessing the cam followers are worn and the unit needs replacing / rebuilding? Any advice appreciated


r/Machinists • • 20h ago

QUESTION Need help drilling a 5/8 hole in 6061

Post image
41 Upvotes

I make these parts on a CNC 3 axis mill but can't (safely) make the hole in the end that is dimensioned on this print on a 3-axis mill.

We've got a manual lathe but I've not got any meaningful experience running the thing, only a few plastic parts here or there. I'm lost on what to look for when buying a drill, the 0.625 diameter regular flute 118° uncoated stainless drill I bought wore down waaayyy too quickly to use in a serious production run (40-50 parts).

  • Workpiece is 6061 aluminum, using dry lube
  • Trying to drill a 0.629 diameter hole to a depth of 1.25"
  • Preferably would finish the hole using a reamer
  • Trying to find a way to be able to run about 40 parts in an hour, I can take longer but someone's got to keep the CNC machine running.

Any input would be appreciated,

Thx gang, I love you <3


r/Machinists • • 11h ago

SpaceX Machinist

7 Upvotes

Hello everyone,

I got an email from SpaceX in Torrance, CA for a Machinist Job Offer. It is a 30 miles drive from my house.

I also have another job offer from Amphenol Corporation for a CNC Setup Programmer. This will be my first time becoming a cnc programmer after 10 years being a machinist. It is only a 10 miles drive from my house, but the pay is 5$ less than SpaceX

I'm not quite sure what to choose between these two, both will look good in my resume.

I was just wondering if anyone in this group ever works for them before, especially SpaceX at their Facility as a Machinist in Torrance, California ? How was it and did you really like it ? What are the pros and cons ? Is it worth it ?

Thank you everyone for the advice.


r/Machinists • • 14h ago

QUESTION BMC metal works

Post image
9 Upvotes

Probably a long shot but it’s worth a try, does anyone here work for BMC Metalworks in Columbia TN? I had a phone interview recently and liked what I heard. I’d like more insight before I make a follow up phone call after the first of the year (without going into a ton of detail, I am unable to leave my current job until that point and they were understanding).

Pic unrelated


r/Machinists • • 15h ago

Time to choose a spindle for my manual mill rebuild. What could have been here originally? Suggestions for something new/ belt drive? 38mm

Thumbnail
gallery
9 Upvotes

I've included some photos of the spindle mount. I could make a new one or mill this one down and add a new bracket, but it's already built and the pins are placed to locate it pretty accurately.

I'm having trouble finding something that could have fit it though. 38mm is a bit of an odd duck size.

I know Biddle and Gepy made some small spindles, but nothing is quite right. Maybe there was an inner sleeve at some point? It looks like it could have possibly been a quill.

I also thought about boring it out to 40mm, to accept something more easily available, but I would then have to reinforce it, as there would only be a few mm holding it down.

If anyone has ideas or suggestions for something around the 500$ range I would be very thankful. Price negotiable; id like something with decent bearings and sturdy construction.

Heck any ideas or opinions at all are super welcome!

Thanks everyone!


r/Machinists • • 1d ago

A story about blame and jumping the gun.

46 Upvotes

Recently I had a situation where an employee from another shift ran an inconel part and created a sloped edge on the top that wasn’t flush with the surface finish like on the other 4 parts that I ran the previous shift.

The only variable that changed that he even said so himself was replacing the EXACT endmill that creates the slope before he ran it.

This employee also has a history of half assing work and being an annoying shift change partner to clean up after.

My immediate assumption was that he either fucked up or is lying about retouching it off. BUUUT my more senior coworker advised that we just focus on a traditional backtracking method to figure out what exactly went wrong.

LO AND BEHOLD the tool touch off was perfectly fine, barely a change in height from the previous offset. AND the part also started cutting a good chunk off the top when we reran the whole program without TOUCHING ANYTHING.

So I looked down underneath and yep…the whole stock piece had been moved by one of the drill holes because this specific stock piece had horrible flatness on it thus making contact with the vice very sparse across the front and back.

None of the others were as bad and this one didn’t even look that egregious from the naked eye.

SO…even if you have valid reason to immediately dogpile on someone, assumptions will always be assumptions unless given actual evidence.

Thankfully I kept my thoughts to myself so I didn’t look like an asshole after the fact.


r/Machinists • • 5h ago

QUESTION Y axis adjustment?

Post image
0 Upvotes

Good morning everyone!

The company I work for uses these blocks on their lathes and I cannot seem to find the proper way to adjust the Y on them (Chevin tools, Capto model). The lathes I run now unfortunately dont have a Y axis so tramming in drills in X is the only thing I can really do for now. Ive looked through Chevins website but havent come across any diagrams or instructions for this. They seem like really nice blocks though!

One solution a few guys around here have found (which I disagree with) is loosening the 4 bolts holding it to the turret, and tapping Y in with a hammer. It works, but I know there must be a proper way to accomplish this. Any advice would be greatly appreciated.

Thanks!


r/Machinists • • 1d ago

PARTS / SHOWOFF 12" OD, 12" Long. Gets a 3.4375 bore all the way through. Fun times, lol.

Post image
33 Upvotes