r/Physics • • 6d ago

Meta Careers/Education Questions - Weekly Discussion Thread - November 12, 2026

7 Upvotes

This is a dedicated thread for you to seek and provide advice concerning education and careers in physics.

If you need to make an important decision regarding your future, or want to know what your options are, please feel welcome to post a comment below.

A few years ago we held a graduate student panel, where many recently accepted grad students answered questions about the application process. That thread is here, and has a lot of great information in it.

Helpful subreddits: /r/PhysicsStudents, /r/GradSchool, /r/AskAcademia, /r/Jobs, /r/CareerGuidance


r/Physics • • 1d ago

Meta Physics Questions - Weekly Discussion Thread - November 17, 2026

2 Upvotes

This thread is a dedicated thread for you to ask and answer questions about concepts in physics.

Homework problems or specific calculations may be removed by the moderators. We ask that you post these in /r/AskPhysics or /r/HomeworkHelp instead.

If you find your question isn't answered here, or cannot wait for the next thread, please also try /r/AskScience and /r/AskPhysics.


r/Physics • • 7h ago

Question Is there a "skill tree" / dependency graph for learning physics (like one in the link here for math)?

36 Upvotes

I really like how it's laid out its topics on its start page. It's basically a visual prerequisite graph starting from basic set theory and branching all the way up to advanced/niche stuff like unbounded operators, with lectures attached to each node, and I saw a few videos and while they're not long enough IMO they do give a very good idea of the topics and order to learn.

Does anyone know of something similar for physics? Ideally, a visual roadmap or dependency chart that goes from intro mechanics all the way up to grad-level and specialized topics (QFT, GR, condensed matter, etc.), bonus points if it shows the math prereqs needed at each step.

I've already seen "Map of Physics" video, which is great, but I'm looking for something closer to an actual learning progression/curriculum tree rather than just a concept web.


r/Physics • • 7h ago

Advice or Guidance on coding/computer science

10 Upvotes

I recognize I have a problem. I love physics and got a degree in it, I hate the idea of coding. I don't really have exposure to it besides a C++ class that never got applied to anything so I don't know what to expect at a job. I'm sure it has to do with my ADHD, I find physics endlessly interesting, but coding for lack of insight into how it can be interesting or used.... I'm just stuck at this perception of it as a monotonous chore that I will hate if I attempt to find a job in the usual for our degree... data scientist/analyst or (software) engineering related. Admittedly I'm also more pessimistic because I don't view the tech/AI industry fondly.

Some aspects of computer science seem interesting, but I figure I'm not trying to double major here. So what parts do you guys find most important to know for what jobs?

I'm just wondering if anyone was on this same boat. What makes you interested in coding, is it a big part of your job? what do you use it for?


r/Physics • • 32m ago

News Natural photonic structures found in marine organisms could offer new approaches to solar energy harvesting, UV-resistant materials, and cosmetics.

Thumbnail spie.org
• Upvotes

r/Physics • • 1h ago

Question What should I choose, Math Or Physics?

• Upvotes

Hello! Recently, I've started thinking quite a lot about my future.

I love mathematics and physics, and I've started working on mathematical olympiad problems. I'm also preparing for various competitions in the hope of obtaining scholarships, since I'm currently in a rather difficult financial situation. However, that's not really the main point.

I've been looking at different degree programmes at KTH, particularly Engineering Mathematics and Engineering Physics, and suddenly I started wondering whether I actually want to pursue mathematics as a career in the future.

What I enjoy about mathematics is its ability to solve problems, perform complex calculations, and develop logical thinking. However, when I look at the career paths available to mathematicians after graduation, I find myself somewhat disappointed. They aren't quite what I had imagined. On the other hand, perhaps I'm dismissing the profession without even having given it a proper chance.

I essentially want to learn everything: chemistry, physics, and, above all, mathematics. Why? Because I love the idea of being able to create almost anything by combining knowledge of mathematics, physics, chemistry, and computer science (CS). For example, I would like to be able to develop some kind of useful device or technological invention.

However, if I choose pure or applied mathematics, my understanding is that my role would mainly involve performing calculations and developing mathematical models for researchers in other scientific fields, without actually participating in the practical research myself. At least, that's the impression I've got from looking into different careers in mathematics.

Let's imagine a project divided into three parts, with one part assigned to a physicist, another to a chemist, and the third to a mathematician.

The physicist begins by conducting experiments to investigate how physical laws influence what happens during the experiment. They then start developing models, possibly simulations, and so on.

The chemist investigates the properties and behaviour of different substances and examines what chemical reactions might occur when different materials are combined.

The mathematician, on the other hand, takes the available data, inputs it, constructs graphs, and tries to optimise material usage or calculate, for example, the maximum altitude a rocket could reach.

However, from my perspective, the mathematician seems to be doing rather boring and uninteresting work compared to the other two.

That's why I would really appreciate some advice on how I should approach this and what direction I should take.

I'm already studying mathematics independently. I also plan to start studying university-level mathematics independently to prepare myself for future studies and eventually pursue a PhD in mathematics.

I've already invested a considerable amount of time and effort into this path, but this question has suddenly made me question my entire plan.

Will I actually be in demand in the future with a PhD in mathematics? I can't help thinking that AI might be able to replace mathematicians much more easily than, for example, physicists.


r/Physics • • 1d ago

Static Electricity: New Research Into the Mechanisms of Contact Electrification

Thumbnail
allatra.media
40 Upvotes

Two pieces cut from the same slab of silicone can develop opposite charges after touching and separating. In the experiments described in this article, the piece that had touched other samples more often generally became more negatively charged than its partner.

We understand how electric charges behave, but explaining exactly how charge transfers between insulating surfaces, and predicting which surface becomes positive or negative, is still an active area of research. These experiments suggest that a material’s contact history matters alongside its composition. I find it fascinating that something as familiar as static electricity can depend on tiny differences in a surface and even what it has touched before.


r/Physics • • 3h ago

Energy isn’t conserved in an expanding universe and I think that deserves way more attention early on.

0 Upvotes

In school it’s drilled into you that energy is always conserved, no exceptions. Then you hit Noether’s theorem and find out it’s really a consequence of time translation symmetry. If the laws don’t change over time, you get a conserved energy. Fine, that makes sense

The problem is that an expanding universe doesn’t have that symmetry. light redshifts as space stretches, its energy goes down, and there’s no global accounting that gives it back anywhere. Sean carroll wrote a well known blog post about this if anyone wants the longer version.

Locally it all still works, which is why nothing breaks in a lab or in any normal calculation. It’s only the big global statement that falls apart

so how do you explain this to someone who has only ever heard “energy is conserved”? And is it still the right rule to teach first, or does it set people up for confusion later?


r/Physics • • 1d ago

Text book needed for 100 level class

9 Upvotes

I need a text book that can be used in a 100 level intro to quantum class. The class is for freshman with only algebra knowledge. It is intended to get students with a limited science background interested in our schools quantum program.


r/Physics • • 1d ago

Question What limits light moving through tubes?

8 Upvotes

I am a construction estimator by trade but for a short time was a physics student prior to this. I had a thought today while looking at an interesting design of a solar tube, thing that carries sunlight that enters at the roof through an attic down to the finished living space. I thought, well, what happens to the light as it moves through? If say 100 lumens were sent into the tube, then how many would end up at the other end?

My first thought is that the reflectivity of the tube is the major factor in how many lumens make it to the end, but it could be something more specific about the material's chemical composition and how the molecules are arranged in their array that "traps" the light within the tube as it travels. However, I would also think that if say you want to drop a solar tubes down through a skyscraper that at some point it would not matter how reflective the material but instead that the tube is so long that the light reflects off of enough air molecules or floating dust that they never make it through the tube unless the tube were under vacuum.

If anyone could guide me in the right direction for information on this topic, I would greatly appreciate it.


r/Physics • • 18h ago

Random magnetic field around me

0 Upvotes

I was wondering what could cause a magnetic field around me. I put an unconnected antenna next to a magnetometer and the magnetometer had a reading. The antenna wasn’t connected to anything but moved my magnetometer. The weird thing is I went to a different place and this effect did not occur.


r/Physics • • 1d ago

Oxford's Molecular Motors Research Group

Thumbnail physics.ox.ac.uk
6 Upvotes

r/Physics • • 1d ago

[ Removed by Reddit ]

1 Upvotes

[ Removed by Reddit on account of violating the content policy. ]


r/Physics • • 1d ago

Exchange heat with outside but not air

19 Upvotes

It’s winter which means my building is blasting the radiators. I’ll open the windows to cool down the place but it has a few problems. It gets cold on the floor near the window and it makes the apartment even drier and the windows are a pain to shut. So that has made me curious, how can I transfer my indoor heat outside without exchanging outside air for inside air? Short of adhering a massive heat sink to the glass my next idea was run a window AC in the winter which would be pretty efficient until it freezes and seizes up. This isn’t really a practical question since I should probably just figure out how many radiators to shutoff to make my apartment comfortable, but I thought it was funny to think about ways to make thermal insulation worse.


r/Physics • • 1d ago

Question Incoming physics undergrad aiming for sustainable energy & moving to Denmark—how to spend the summer productively?

6 Upvotes

Hey guys,

​I’m starting my physics degree next year and want to get into sustainable energy down the line, hopefully working in Denmark at some point. Because of that, I really want to keep my GPA high from the start and not get completely wrecked by first-year courses.

​For anyone currently in uni or who already graduated, what would you actually recommend doing over the summer to prepare?

​Should I just grind single-variable calculus and basic Python, or is there something specific you wish you knew before day one? Also trying to figure out how much to study so I don't burn myself out before classes even start. Thanks🫪


r/Physics • • 3d ago

why does this green laser pointer reflect orange light when shone on wool?

Thumbnail
gallery
2.7k Upvotes

Two pictures with the same green laser pointer. When shone on red wool, it gives off an orange reflection. When shone on red cotton, it retains the normal green colour.

Why would a green laser give off a different coloured reflection?


r/Physics • • 1d ago

With the road blocks we’ve hit in Physics today, what are the constraints and limitations and how likely are we to overcome them soon.

0 Upvotes

Is the math too complex Or certain substances are unobtainable (dark matter/energy) etc to reproduce experiments Or we can’t produce enough energy.


r/Physics • • 3d ago

Image how does refraction works here? how is it possible to see rainbow from other angle from same place?

Post image
163 Upvotes

Photo credit: Nigel Danson.

I can confirm that this is real. You can also check the original post on the Instagram account (from the ss)
I got it from to verify it for yourselves. 💁🏻‍♂️ (no promotion)
and i have taken permission from the photographer to post it here
... sorry if this violates any rules let me know ill delete it after i got the answer🫶🏻


r/Physics • • 2d ago

Question Why Beryllium has such low resistivities under liquid nitrigen temperature?

29 Upvotes

https://en.wikipedia.org/wiki/Electrical_resistivities_of_the_elements_(data_page))

0.75 nΩ·m is alot lower than any pure metal in this sheet. I didnt find any source for this wiki page. Is this low resistivity real? If so, what mechanism produces this result?


r/Physics • • 2d ago

Video The Rise & Fall of Caloric Theory - five-part series about the obsolete model of heat

Thumbnail
youtube.com
5 Upvotes

r/Physics • • 2d ago

Going from stupid to A-Level

0 Upvotes

Helloo! So i just realized to get into the uni I want to, I have to write some CIE A-Level subjects as they dont accept my GED. I am basically starting from nothing to be completely honest. Do you have any advice to make learning the physics easier? Any tips or basics I have to know?


r/Physics • • 3d ago

Interested in cutting edge aerospace R&D, exploring physics minor and graduate school

14 Upvotes

Hi folks, I’m an aerospace major but I am interested in going beyond industry and into more experimental research (which might be better with a physics degree) while also keeping an industry backup (which is better with an aerospace degree).

For a while now I was teetering between studying aerospace engineering for the sake of being able to have a good job or studying (astro)physics since the department has more resources and it is what I wanted to do originally, but not so great job prospects. My goal is to try and work in aerospace R&D as I feel like industry work is not quite right for me outside of necessity. Most aerospace R&D positions are quite physics heavy (advanced detectors for instrumentation, plasma propulsion, etc).

I decided to come up with a compromise in staying in aerospace but minoring in physics. I will take a full classical mechanics sequence, a full E&M sequence, and quantum I, while hoping and praying I can get into an applied physics program for a masters to make up for quantum II and thermo/statmech while also exploring aerospace-relevant physics topics like plasmas.

This might also keep doors open for PhDs in aerospace, applied physics, or astronomy (specializing in instrumentation in the latter). This way I can pursue the physics research needed for aerospace R&D while also keeping industry positions open, addressing the weaknesses of both degrees.

Is this a good idea? Would it be better for me to just switch to physics/astronomy and join engineering groups/research?

Thank you


r/Physics • • 3d ago

Undergraduate project: measuring laser beam waists using the knife-edge method

6 Upvotes

Hi everyone!

I wanted to share a project I worked on as part of my undergraduate physics studies.

We were interested in measuring the beam waist of two lasers using the knife-edge method. As part of the project, we put together an automated measurement setup using a Thorlabs translation stage, an ESP32, an optical power meter, and some custom electronics.

We tested it with a diode laser and a HeNe laser. Our measured beam waist values were:

  • Diode laser: approximately 9.8 µm
  • HeNe laser: approximately 30.8 µm

I also wrote Python scripts for data acquisition, curve fitting, and beam propagation analysis. I've uploaded the code, experimental data, PCB designs, figures, and our lab report to GitHub.

Repository: https://github.com/turtushig22-blip/thorlabs-esp32-laser-beam-profiler

This was an undergraduate project, so I'm sure there are things that could be improved. I thought I'd share it in case anyone is working on something similar or is interested in the knife-edge measurement technique.

I'd genuinely appreciate any feedback, suggestions, or comments on the measurement approach and analysis.

Thanks for reading!


r/Physics • • 3d ago

In a heated debate with MotoGP fans

Thumbnail
gallery
16 Upvotes

Most people are saying on MotoGP starts, the riders kick their feet back so they can use their chest and torso to "press" more on the front of the bike, therefore increasing weight on the front wheel and preventing wheelies (which is a big no no for starts). I just cant seem to picture how kicking your legs out back puts more weight on the front. First of all, i imagine it acts like a seesaw, the hips being the pivot and the legs weight pulls the torso off the bike like a lever. And second, just simply by distributing weight backwards, theres no way that CG doesn't shift rearward, therefore taking weight off the front wheel.

(The first image is generated with chatgpt but the second slide is a real image of the stance that riders take on motogp starts)

Basically i'm convinced that this stance helps with balance and stabilization, but everyone saying it puts more weight on the front wheel has me absolutely dumbfounded.


r/Physics • • 3d ago

Question What's the practical potential of dielectric laser accelerators?

0 Upvotes

I recently came across dielectric laser acceleration (DLA) and started wondering about potential applications beyond research demonstrations.

Could this realistically become useful for electron microscopy or other industrial applications? What are the main technical hurdles preventing that today and what type of performance milestones would need to be met?

Appreciate your thoughts on this.