r/diyaudio • • 9h ago

I can't believe my audio app side project passed 50k users

Post image
39 Upvotes

I built an audio analyzer app in beginning of this year for ios and android as a small audio side project. I did not expect getting many users for a niche app like this. I made a [post] when passing 10k users, got some feedback then an added new features based on that. It has now has passed 50k users for android alone.

It can do RTA, spectrogram and sweep measurements and I tried to focus on simple user interface that works both in portrait as well as landscape mode.

Hope some of you have some use of it and feedback would be appreciated!

It is free without adds and an optional one time pro IAP.

https://www.otsukare.se/spectralscan


r/diyaudio • • 1h ago

Where can I find reducer adapters for speaker drivers?

Thumbnail reddit.com
0 Upvotes

r/diyaudio • • 9h ago

ShairPort - Sync - How to play Apple Music on your Audio Systems

0 Upvotes

Hi,

Edit : version 5 is out now with more features .. Do upgrade

This is a quick reference guidance on how to install Shairport-sync.. (its relatively easy). Shairport is akin to Apple Airport you can use Apple Music with your stereo etc .. I thought this would be a great place to share

Please note I'm not an expert .. I would regard myself the 'select and paste brigade' to use Linux commands but I'm getting better at it.

It turned out great and its working like magic (well my magic) , before people start having a pop at anything at the moment the set-up fulfils a need that is it ..

So here it goes

you will need a cheat sheet for nano or vi commands you will be editing files

Hardware used

  • Raspberry Pi Zero 2 W (with header soldered on)
  • HiFiBerry DAC+ Zero (please don't use your headphone port as a line out .. not elegant , crummy quality, get a line out shim or the Berry here on the kit list)
  • UniPiCase Pi Zero Case - Tall (HiFiBerry DAC+ Zero)
  • (Raspberry) power Supply (it will not run from an USB port. trust me I tried) make sure you get the micro usb version
  • Standoff kit to support the board and DAC
  • Spare 32GB MicroSD card + USB adapter

----------------------------------------------------------------------------------

software used

- Raspberry pi Imager

Steps to install everything.

Create Boot SD for your PI

This has to be done first as after you have inserted the PI in the case you cannot get to the SD slot.

Raspberry PI imager

  • Download and install
  • insert the SD card in an USB adapter insert in your PC
  • select the following device Raspberry Pi Zero 2 W
  • Select OS, scroll down to PI OS Other and select OS Lite (this is the lightest version, 64bits)
  • Select the Storage - this is your Micro SD card

Next step is important if you want to go 'headless' from the start,

Settings file

- Select that you want to include a settings file, ensure you have your

  • Host name (give it a name Airport or location name kitchen for example easier for the rest of the family)
  • Wifi settings
  • username + password
  • second tab, activate your SSH access

Save the file, start the build of the SD card (don't skip verify .. be patient)

-------------------------------------------------------------------------------------------------------------------

Hardware assembly

This is fiddly stuff,

- Place the DAC on the pi board on the header and screw in the standoffs

- insert the MicroSD in the PI

- Place the front of the case on the port side of the PI and then gently clip the PI into the base of the case followed by the top of the case. everything should click together. Don't force it

------------------------------------------------------------------------------------------------------------------

First boot up

- insert power supply - PI will boot.

- Check on your Broadband router, or Wifi who's connected if all is good your hostname that you selected will pop-up somewhere, Check for IP address

you now need to use your username and IP address

- SSH to your PI, command is :

SSH username@IP address of your PI

- enter password, select yes that you want to save your SSH Key
(if you make a mistake somewhere on your build and you need to start from scratch, you might have to remove your SSH key of your laptop or pc google that)

----------------------------------------------------------------------------------------------------------------------

House keeping

So now you are looking at $ ... fantastic.

You need to use this command SUDO (Super Dooer) to run commands on your PI

----------------------------------------------------------------------------------------------------------------------

Update PI OS

yes , you need to update your PI OS on the terminal prompt you enter

sudo apt-get update ( hit enter)
sudo apt-get upgrade (hit enter)

accept that you are happy to use extra space. let it run

now from here I'll post links to things to do. read it yourself and work through it

step 1. fix your IP address of the PI

https://www.tomshardware.com/how-to/static-ip-raspberry-pi

Step 2. Enable your DAC (this is for Hifiberry)

https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/

Please note on your most current OS, your settings file is at / boot/firmware/config.txt. follow the instructions to disable the sound paths of the other ports. There is a fix for on the ALSA side (linux - How to configure ALSA? - Super User) to steer audio to a predetermined path.

use VI and be patient..

Reboot

---------------------------------------------------------------------------------------------------------------

Step 3. Install all the extra software you need

1. GIT - https://git-scm.com/book/en/v2/Getting-Started-Installing-Git

2. ALSA - https://www.geeksforgeeks.org/how-to-install-alsa-tools-on-ubuntu

3 Auto conf - from the $ prompt -

sudo apt-get install autoconf

---------------------------------------------------------------------------------------------------------------

Step 4: installing NQPTP - https://github.com/mikebrady/nqptp , follow the instructions to the end and enable auto start otherwise it will not work after the reboot

-----------------------------------------------------------------------------------------------------------------

Step 5: The main event .. installing Shairport-sync https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md

if you are planning to use. Airport 2 you need the top code snippet

sudo  apt install --no-install-recommends build-essential git autoconf automake libtool \
libpopt-dev libconfig-dev libasound2-dev avahi-daemon libavahi-client-dev libssl-dev libsoxr-dev \
libplist-dev libsodium-dev libavutil-dev libavcodec-dev libavformat-dev uuid-dev libgcrypt-dev xxd

follow the instructions here https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md#3-build

down to letter, and the very end .. enable the service to start at the reboot

Enjoy your work and reap the approval of wife and children.

----------------------------------------------------------------------------------------

Couple of conclusions at the end

Q: Is it difficult? No, I did this over breakfast. 1.5 hrs tops to get everything done on the PI

Q: Was it worth it? yes, feeling of achievement is great, I could have spent about 15 euro extra for a WIIM mini but what is the fun in that ?.

Q: What is it like? it's actually a lot easier to use than Google Chromecast.. I have been a Android Dude for a long time and with the move to apple and my move to apple One to save money I had to make wholesale changes on how we cast music. This is very seamless experience, chrome cast can be utterly finicky.

Q: What is the sound like? It's okay, one in the kitchen for background while we are cooking, working and living in the kitchen and one hooked up to a set of AudioEngine a5 with a resurrected Subwoofer in the living room. it's not hifi but it gives me the joy to listen to music ( next plan is to build my own speakers and get proper set-up + amps etc).

Q: what's not to like? If there is an update of sorts, there is the potential it will break .. eg we're back SSH in the Shairports figuring shit out. not great but do able.


r/diyaudio • • 17h ago

Has anyone tried this?

0 Upvotes

Ill be setting up a new jam room soon at my new place, could I hang a couple sheets of plywood on the walls with exciters as a PA system for vocals, or to run my guitar through it? It seems like they excel in this frequency range, but could they handle competing in volume with the drums?


r/diyaudio • • 21h ago

Help w/Subwoofer Design

Thumbnail reddit.com
0 Upvotes

r/diyaudio • • 5h ago

Subwoofer, Passat V6 2006

Thumbnail gallery
0 Upvotes

r/diyaudio • • 19h ago

help designing the crossover

3 Upvotes

I'm building a diy 2 way speaker with coax Dayton Audio CX120-8. I'm now to the point where I need to design the crossover filter to make these speaker sound decent, but I've ogt no knowledge at this, can you help me with it?

My goal is for it to sound as analytical as it can.


r/diyaudio • • 21h ago

DIY Planar Headphones

3 Upvotes

Heads up: I have zero audio background. This is my first time building any kind of driver, and I picked planars for some reason. Still kind of shocked it actually plays music.

For a school project I’m building a pair of Bluetooth over-ear headphones (closed back), and of course my mind went straight to planar magnetic drivers, because I’d seen that they’re pretty “easy” to make DIY.

So here I am. I made my first voice coil with a pattern I came up with myself, roughly based on what I’d seen online and on YT. I ordered 50 × 3 × 3 mm magnets from AliExpress (they turned out to be 48 mm long) and built my first ear with a single-sided 8-magnet array. For the diaphragm, I laminated normal household aluminium foil onto 25 µm Mylar and etched the coil with copper sulfate and salt. The etch resist is permanent marker, drawn with my CNC.

To my surprise, it worked and didn’t sound too bad. But I wasn’t getting much low end, and I found out I was probably over-tensioning the membrane. My next build used a push-pull magnet setup, which made it more sensitive, but still no bass.

First coil design with wrong spacing relative to the magnets (fixed in current design) and tensioning rig

Where I’m at now: I used IPA surface tension on the back of a 3D printer bed sheet to get the film flat without tensioning it at all, and now I’m getting pretty decent mid-bass.

Current almost untensioned design
Tested a back mesh proposed by Claude

Don’t kill me for these measurements. I used my HyperX QuadCast and REW just to get a rough idea of what the driver is doing.

 

(with a bit of Claudes help)

My questions:

  • How can I measure more accurately (and cheaply)? I’m guessing it needs a tight seal with the earpad?
  • Is there anything else I can try to make it sound better?
  • Would a thinner membrane and thinner aluminium foil help?
  • How much gap should I leave between film and magnets? Right now its only about 0.3 mm per side.

r/diyaudio • • 11h ago

40W LM3886 Amplifier progres

Thumbnail gallery
5 Upvotes

Hi it’s my second version of the amp, would be great if you told me what you think about it.
Edit: I will change the arrangement of the output so the trace would be shorter


r/diyaudio • • 3h ago

I’ve open-sourced LiveWDF

5 Upvotes

I've been working on LiveWDF for a while, and I've finally made the repository public.

LiveWDF is a C++ project built around Wave Digital Filters (WDFs), focused on simulating analog audio circuits in real time.

I've been working on the simulation engine, component models, tube models and a lot of the underlying stuff that makes circuit simulation possible.

There's no official release yet. The project is still under development, and there's quite a bit of work to do before it's ready for one.

That's partly why I'm opening it up now. I'd love to get other people involved, whether that's contributing code, testing things, working on circuit models, improving documentation, sharing ideas or just helping figure out where the project should go next.

If you're into C++, electronics, circuit simulation, audio DSP or any of this stuff, come have a look. I'd be happy to have you involved.

GitHub: https://github.com/Yahiake/LiveWDF

Discord: https://discord.gg/8CV9S2zAQ

Let's get this thing to its first release together.


r/diyaudio • • 6h ago

Selfmade monitor stands

Thumbnail
gallery
41 Upvotes

Made some speaker stands for my monitors with mostly left-over materials. Very happy with how these turned out! Sound-wise the difference with no stands is night and day.


r/diyaudio • • 9h ago

Alpine MDA-W892J + СНА-1204

5 Upvotes