r/diyaudio • u/Shrubluv • 6h ago
Selfmade monitor stands
Made some speaker stands for my monitors with mostly left-over materials. Very happy with how these turned out! Sound-wise the difference with no stands is night and day.
r/diyaudio • u/Shrubluv • 6h ago
Made some speaker stands for my monitors with mostly left-over materials. Very happy with how these turned out! Sound-wise the difference with no stands is night and day.
r/diyaudio • u/duobucha • 9h ago
I built an audio analyzer app in beginning of this year for ios and android as a small audio side project. I did not expect getting many users for a niche app like this. I made a [post] when passing 10k users, got some feedback then an added new features based on that. It has now has passed 50k users for android alone.
It can do RTA, spectrogram and sweep measurements and I tried to focus on simple user interface that works both in portrait as well as landscape mode.
Hope some of you have some use of it and feedback would be appreciated!
It is free without adds and an optional one time pro IAP.
r/diyaudio • u/Asleep_Investment962 • 3h ago
I've been working on LiveWDF for a while, and I've finally made the repository public.
LiveWDF is a C++ project built around Wave Digital Filters (WDFs), focused on simulating analog audio circuits in real time.
I've been working on the simulation engine, component models, tube models and a lot of the underlying stuff that makes circuit simulation possible.
There's no official release yet. The project is still under development, and there's quite a bit of work to do before it's ready for one.
That's partly why I'm opening it up now. I'd love to get other people involved, whether that's contributing code, testing things, working on circuit models, improving documentation, sharing ideas or just helping figure out where the project should go next.
If you're into C++, electronics, circuit simulation, audio DSP or any of this stuff, come have a look. I'd be happy to have you involved.
GitHub: https://github.com/Yahiake/LiveWDF
Discord: https://discord.gg/8CV9S2zAQ
Let's get this thing to its first release together.
r/diyaudio • u/elstuffmonger • 1h ago
r/diyaudio • u/Vast_One_4954 • 12h ago
Hi it’s my second version of the amp, would be great if you told me what you think about it.
Edit: I will change the arrangement of the output so the trace would be shorter
r/diyaudio • u/Ok_Discussion_5126 • 5h ago
I have a very awkward shaped room where I'm going to fit a tv built-in into a corner resulting in an even more awkward space for speakers. I will be using a sub.
I have some Elac Unifi EB5 bookshelf speakers that I picked up on sale but never found a home, I do remember I liked the sound when I did set them up but they will not fit in the awkward space.
I got to thinking about rebuilding the cabs to make them fit which i understand is not a problem as long as I maintain the same internal volume. They are rear ported so I initially planned to switch the port to the front, which I read was not a big deal, but then decided to do away with the port all together and fill in the low end with the sub.
I'm happy to hear people's thoughts on this but my real question is if I'm eliminating the port would it benefit me to change the cab volume?
I think not.
r/diyaudio • u/HM_Bert • 18h ago
Kinda just dumping my thoughts before I commit to ordering pre-cut wood, if anyone noticed something dumb I've done or missing do let me know, or if you have experience with a similar kinda sub in a home, I'm not quite sure how much room gain I'll get.
I've only built a little sealed sub so far, but my goal getting into DIY has really been to build an extra sub for my home theatre that can ideally play loud, and down to 16hz, but on a relatively modest budget.
The best way to achieve this is logically a big ported box for the efficiency it brings, however I'm a bit worried about chuffing and/or pipe resonance ruining it.
Also, I'm using A GRS 12SW-4HE, which whilst it models very well for this low tuning, but have seen a fair few posts of people saying the TS parameters don't match the manufacturer's, which could be an issue. There's also a dip in the frequency response at 16hz on the spec sheet but I'm hoping that may just be an artefact of the test process as it's also present on some other GRS/Dayton subs, and without a matching impedance blip.
I've decided on using 2x 100mm round ports to try and give me some flexibility if things go awry compared to a slot which is much harder to change after the fact.
Ideally, the 2 long ports with a tuning of 18hz will not resonate (~155hz pipe resonance for 1100mm tubes), because the crossover can be set low enough, and there won't be enough harmonic distortion to really excite it. If it does however, hopefully the amount of stuffing and changing the orientation of the port entrance relative to standing waves can mitigate this.
If it turns out the resonance is a problem, I can try shortening the port and just using 1 port instead of 2. Modelling shows this should be pretty much dead on 34m/s (rather than 17m/s with 2) at max output, which with the flares should not cause much chuffing, however the corners (which likely won't be 100% perfectly smooth) might mean it does.
If with the single port, chuffing is also an issue, then I can shorten both ports and have a chuff and resonance free subwoofer, but that won't really go to 20hz and below, certainly not 16hz.
r/diyaudio • u/Firm-Science9690 • 6h ago
Hi, im new to this group. Thanks for joining me.
My problem is while i update my zk ht21 3g amp, it says "OTA update Timeout" thru wuzhi app (android based) then my speaker's sub bass is likely reduced..
Im not using any VPN and my internet speed is very good.
Pls help me thanks
r/diyaudio • u/winnie_the_boo_music • 1d ago
I've been obsessed with the visual aspect of those massive altec inspired multicellular horns I've seen everywhere online. However people have very varying opinions on their sound, from soft and cloudy for some to tinny and like a giant kazoo for others. So I figured it would be best to build a prototype and see/hear for myself. Figured I'd go with 3d printing since it was the cheapest and fastest way to get it done, and with modern filaments and printers it's actually become a viable option for audio applications (see jw audio solana for example).
Two weeks later the build is done and currently serving as the hf band for my sound system. I am very pleased with the sound, great coverage and indeed very musical, not at all sharp or nasal. Print is also holding up very well. Will definitely build a second one!
r/diyaudio • u/R2D4Dutch • 10h ago
Hi,
Edit : version 5 is out now with more features .. Do upgrade
This is a quick reference guidance on how to install Shairport-sync.. (its relatively easy). Shairport is akin to Apple Airport you can use Apple Music with your stereo etc .. I thought this would be a great place to share
Please note I'm not an expert .. I would regard myself the 'select and paste brigade' to use Linux commands but I'm getting better at it.
It turned out great and its working like magic (well my magic) , before people start having a pop at anything at the moment the set-up fulfils a need that is it ..
So here it goes
you will need a cheat sheet for nano or vi commands you will be editing files
Hardware used
----------------------------------------------------------------------------------
software used
- Raspberry pi Imager
Steps to install everything.
Create Boot SD for your PI
This has to be done first as after you have inserted the PI in the case you cannot get to the SD slot.
Raspberry PI imager
Next step is important if you want to go 'headless' from the start,
Settings file
- Select that you want to include a settings file, ensure you have your
Save the file, start the build of the SD card (don't skip verify .. be patient)
-------------------------------------------------------------------------------------------------------------------
Hardware assembly
This is fiddly stuff,
- Place the DAC on the pi board on the header and screw in the standoffs
- insert the MicroSD in the PI
- Place the front of the case on the port side of the PI and then gently clip the PI into the base of the case followed by the top of the case. everything should click together. Don't force it
------------------------------------------------------------------------------------------------------------------
First boot up
- insert power supply - PI will boot.
- Check on your Broadband router, or Wifi who's connected if all is good your hostname that you selected will pop-up somewhere, Check for IP address
you now need to use your username and IP address
- SSH to your PI, command is :
SSH username@IP address of your PI- enter password, select yes that you want to save your SSH Key
(if you make a mistake somewhere on your build and you need to start from scratch, you might have to remove your SSH key of your laptop or pc google that)
----------------------------------------------------------------------------------------------------------------------
House keeping
So now you are looking at $ ... fantastic.
You need to use this command SUDO (Super Dooer) to run commands on your PI
----------------------------------------------------------------------------------------------------------------------
Update PI OS
yes , you need to update your PI OS on the terminal prompt you enter
sudo apt-get update ( hit enter)
sudo apt-get upgrade (hit enter)accept that you are happy to use extra space. let it run
now from here I'll post links to things to do. read it yourself and work through it
step 1. fix your IP address of the PI
https://www.tomshardware.com/how-to/static-ip-raspberry-pi
Step 2. Enable your DAC (this is for Hifiberry)
https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/
Please note on your most current OS, your settings file is at / boot/firmware/config.txt. follow the instructions to disable the sound paths of the other ports. There is a fix for on the ALSA side (linux - How to configure ALSA? - Super User) to steer audio to a predetermined path.
use VI and be patient..
Reboot
---------------------------------------------------------------------------------------------------------------
Step 3. Install all the extra software you need
1. GIT - https://git-scm.com/book/en/v2/Getting-Started-Installing-Git
2. ALSA - https://www.geeksforgeeks.org/how-to-install-alsa-tools-on-ubuntu
3 Auto conf - from the $ prompt -
sudo apt-get install autoconf---------------------------------------------------------------------------------------------------------------
Step 4: installing NQPTP - https://github.com/mikebrady/nqptp , follow the instructions to the end and enable auto start otherwise it will not work after the reboot
-----------------------------------------------------------------------------------------------------------------
Step 5: The main event .. installing Shairport-sync https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md
if you are planning to use. Airport 2 you need the top code snippet
sudo apt install --no-install-recommends build-essential git autoconf automake libtool \
libpopt-dev libconfig-dev libasound2-dev avahi-daemon libavahi-client-dev libssl-dev libsoxr-dev \
libplist-dev libsodium-dev libavutil-dev libavcodec-dev libavformat-dev uuid-dev libgcrypt-dev xxdfollow the instructions here https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md#3-build
down to letter, and the very end .. enable the service to start at the reboot
Enjoy your work and reap the approval of wife and children.
----------------------------------------------------------------------------------------
Couple of conclusions at the end
Q: Is it difficult? No, I did this over breakfast. 1.5 hrs tops to get everything done on the PI
Q: Was it worth it? yes, feeling of achievement is great, I could have spent about 15 euro extra for a WIIM mini but what is the fun in that ?.
Q: What is it like? it's actually a lot easier to use than Google Chromecast.. I have been a Android Dude for a long time and with the move to apple and my move to apple One to save money I had to make wholesale changes on how we cast music. This is very seamless experience, chrome cast can be utterly finicky.
Q: What is the sound like? It's okay, one in the kitchen for background while we are cooking, working and living in the kitchen and one hooked up to a set of AudioEngine a5 with a resurrected Subwoofer in the living room. it's not hifi but it gives me the joy to listen to music ( next plan is to build my own speakers and get proper set-up + amps etc).
Q: what's not to like? If there is an update of sorts, there is the potential it will break .. eg we're back SSH in the Shairports figuring shit out. not great but do able.
r/diyaudio • u/botteas • 1d ago
Whether it be jellyfin, roon, plex, navidrome - they have some features here and there, but not a complete package for what I need, so here's Sterio:
It has a client for iOS/macOS/iPadOS/Android and a server for docker/macos. What it does, in a single package:
And many more stuff. If you are interested, I am running a public beta. Your feedback would be great!
Here's more information and if you want, download links: https://www.sterioapp.com/
r/diyaudio • u/andreakxs42 • 19h ago
I'm building a diy 2 way speaker with coax Dayton Audio CX120-8. I'm now to the point where I need to design the crossover filter to make these speaker sound decent, but I've ogt no knowledge at this, can you help me with it?
My goal is for it to sound as analytical as it can.
r/diyaudio • u/0krizia • 1d ago
Just finished my dual 8 subwoofer. Drivers are ground zero gziw series. I added new dustcap on them to look more plain. Its tuned to 36hz, if i block one port, its tuned to 25hz. I use PA speakon connector so its easy to unplug it if I need the space in the back of the car, or if I want to use it in social hangout settings which I do once in a while.
r/diyaudio • u/Sensitive-Sherbet-91 • 21h ago
Heads up: I have zero audio background. This is my first time building any kind of driver, and I picked planars for some reason. Still kind of shocked it actually plays music.
For a school project I’m building a pair of Bluetooth over-ear headphones (closed back), and of course my mind went straight to planar magnetic drivers, because I’d seen that they’re pretty “easy” to make DIY.
So here I am. I made my first voice coil with a pattern I came up with myself, roughly based on what I’d seen online and on YT. I ordered 50 × 3 × 3 mm magnets from AliExpress (they turned out to be 48 mm long) and built my first ear with a single-sided 8-magnet array. For the diaphragm, I laminated normal household aluminium foil onto 25 µm Mylar and etched the coil with copper sulfate and salt. The etch resist is permanent marker, drawn with my CNC.
To my surprise, it worked and didn’t sound too bad. But I wasn’t getting much low end, and I found out I was probably over-tensioning the membrane. My next build used a push-pull magnet setup, which made it more sensitive, but still no bass.

Where I’m at now: I used IPA surface tension on the back of a 3D printer bed sheet to get the film flat without tensioning it at all, and now I’m getting pretty decent mid-bass.



Don’t kill me for these measurements. I used my HyperX QuadCast and REW just to get a rough idea of what the driver is doing.

My questions:
r/diyaudio • u/Straight_Ad3417 • 18h ago
Ill be setting up a new jam room soon at my new place, could I hang a couple sheets of plywood on the walls with exciters as a PA system for vocals, or to run my guitar through it? It seems like they excel in this frequency range, but could they handle competing in volume with the drums?
r/diyaudio • u/Riziom • 1d ago
I just acquired a technics SL-10 record player, and now the fun part - the amp and speakers.
A few important things:
For speakers, I’m looking at building a set of DMLs. Lots of resources on this, but interested if anyone here has a good experience with nice-looking wall-mounted versions. My personal experience with them is minimal at best.
My other thought is to fix up an old set of Magnepans, but that’s also easier said than done.
For the amp, I’m kind of stumped. I’d love to build a tube amp, but I’m having trouble finding anything wall-mountable with minimal depth. I don’t mind tubes sticking out, but a thick base is a deal breaker.
Any thoughts are appreciated!
r/diyaudio • u/bebiodicionario • 2d ago
This is my first loudspeaker project: an open-baffle system built around a Lii Audio Crystal-8 (the red version, which I rarely see posted around) and a SB Audience BIANCO-12OB150-01 , with digital filtering and bi-amplification. After about a year, the design is fairly settled, while the electronics are still evolving.
I’m a photographer by trade, and the project started when my Klipsch RP-600M II developed an irritating tweeter buzz. Off-the-shelf speakers are expensive in Brazil, so I went down the DIY rabbit hole and started sourcing components.
I call it Painel Sonoro Oito-Doze, Portuguese for “Eight-Twelve Sound Panel.” It’s actually a DIO—do it ourselves—project: I had help from two friends, a carpenter/furniture designer and an architect, with the wooden fronts and metal fabrication drawings. I also learned a lot from lurking here (so in the spirit of giving back, here's my report).
The main influences were Leon Huijgen’s early open-baffle work, Decware’s Zen Master series, PureAudioProject, and builds shared by other DIY enthusiasts. There’s an obvious resemblance to the PureAudioProject Duet, although mine uses less expensive components, a different side profile and a heavier baseplate.
The 8-inch Crystal-8 handles the full range, running unfiltered, with no high-pass. It has a paper cone and a 25 mm voice coil; published parameters include Fs of 37.5 Hz, Qts of 0.625 and Vas of 120 litres. It’s rear-mounted, with a smooth roundover around the cut-out. It's attenuated by 8db to level match.
Below it, the 12-inch SB Audience woofer supplements the bass. It’s designed for open-baffle applications, with a coated paper cone, a 60.5 mm voice coil and published parameters of Fs 41 Hz, Qts 0.68, Vas 80 litres and Sd 530 cm². It’s flush-mounted on the front.
The wooden fronts are louro-faia, commonly traded as Brazilian lacewood. Its pronounced ray figure gives it that distinctive flecked pattern against a brown to reddish-brown background. Appearance was part of the choice; I’m not attributing a particular sonic benefit to the species. They are 480x920x20mm.
The steel side wings form a U-shaped baffle around the woofer, tapering to a shallower profile around the Crystal-8. This extends the front-to-rear acoustic path mainly in the woofer section. The calculated cavity resonance is around 343 Hz, above the woofer’s 250 Hz low-pass setting, though the gentle filter slope won’t eliminate excitation at that frequency.
We made two prototypes to work out the proportions, cut-outs and mounting details before producing the final fronts. The woodworking took considerable effort, but I believe it's the main point of attraction of this design.
The signal chain is:
WiiM Ultra → Raspberry Pi Pico 2 / RP2350 running DSPi → two PCM5102 DACs → two AIYIMA A07 Max amplifiers → speakers
The two DACs provide four analogue channels for the stereo full-range and woofer sections, with DSPi handling routing and filtering. Its support for multichannel digital output on RP2350 hardware makes it useful for this kind of setup.
The woofer receives a first-order Butterworth low-pass at 250 Hz, giving a 6 dB/octave asymptotic electrical slope. Since the Crystal-8 remains unfiltered, there’s broad overlap between the drivers, and their acoustic sum depends on the mounted responses, relative levels and phase. The woofer also doesn’t relieve the Crystal-8 of low-frequency excursion; trying a high-passed alternative is on my list.
For now, the electronics are still boards and wiring in a cardboard box. It’s convenient for experimenting, but the packaging has some catching up to do with the speakers.
My main listening reference was Keith Jarrett’s trio recordings at the Blue Note in 1994. Jarrett probably accounts for 80% of my listening, so I started with music I knew well. Those recordings sounded encouraging, but the bigger surprise was when I listened to other albums with strong vocal presence: Patricia Barber singing Miss Otis Regrets, Tracey Thorn and Everything but the Girl, Nick Cave Boatman's Call, Milton Nascimento's angelical voice on Angelus and vocal works by Philip Glass (Songs from Liquid Days) and Arvo Pärt (Stabat Mater, Lamentate).
What I enjoy most is the spatial presentation: music feels detached from the panels, with substantial stage width and depth, and clearly positioned performers. As a photographer, I find myself thinking about how sound, like light, changes the way a room is perceived.
This is a system for sitting down and listening, alone or with a few friends. It gets loud, but high output and uniform coverage around the room weren’t the goals, and deep sub-bass isn’t its strength.
I have a measurement microphone and will gather measurements soon. Next comes refining the driver integration, giving the electronics a proper enclosure or creating a dedicated crossover.
r/diyaudio • u/Kleact • 2d ago
80w Valve driven horns, (tweeter, upper mid range, lower Mid range).
200w transistor bass amp. Bass Ball 2 inch thick concrete 8.75 cub ft. volume.
Clean down to 19Hz..
Studio for production of video composition for soundtracks studio.
r/diyaudio • u/02AccordCoupe • 2d ago
Hooked the bass knob and wire up. (Came in the box with it) lost all bass. If I turn the bass up on the head unit it works but barely metering at the speaker terminals I get like 3 volts.