r/sffpc • • 43m ago

Assembly Help Help

1 Upvotes

I ordered my pc parts which are:

AMD RYZEN 7 9700X

GIGABYTE B650I AX

Lian li sp850 v2 sfx psu

Corsair iCUE LINK H115i AIO 280mm (on the way)

And the Coolermaster NR200P V3

....

The case came totally damaged and i asked for return but requesting another one will take a lot of time since it's being shipped from outside the country I'm in

...

In considering changing into the lian li B4 since it's available here locally what do u guys think and will i have to change anything in my build

...

P.S I'll have a GIGABYTE WONDFORCE RTX 9070 SSF but maybe in a couple of months


r/sffpc • • 49m ago

Build/Parts Check YGT N195 Case with an rx 580

Thumbnail
reddit.com
1 Upvotes

r/sffpc • • 2h ago

Benchmark/Thermal Test New deepcool AN600 VC in jonsbo t9

Thumbnail
gallery
21 Upvotes

New 67mm king for am5 cpus,

I use it w 9700x and nf a12x25 g2 chrmx.

Short term it can dissapate up to 150w from 8 cores, in cb26 w side panel on it averages on 135w.

In games (uv -24, 5.5 Ghz all core, 1.27 Vsoc) it handles 9700x 65-70% on 105-110w and 80-83c.

Bcs of fin stack density it cools ram not so well, up to like 70-100% of fan. If you have lp and thin aluminium ram like me, you better be getting 25mm good fan.

In comparison w is-67xt it handles +10w avg all cores and 7-12 degrees lower in helldivers 2.

Also it handles instant heat much much better than is-67xt.

(Is-67xt was also used with nf a12x25 g2 chrmx)


r/sffpc • • 2h ago

Assembly Help What's the best case that isn't too restricting for the rx7900xtx

1 Upvotes

My only two requirements is that it has to have pretty good airflow and is compact but not restrictingly compact like the formdark t1 I love the case, but it's almost a little too small


r/sffpc • • 4h ago

Assembly Help [Parts Check] DIY Custom Cables for Thorzone Nanoq S + Corsair SF850 (Type-5)

2 Upvotes

Hi everyone,

I recently bought a Thorzone Nanoq S (which is supposed to ship today!) to downsize from a Lian Li B4. Because of my ASUS Prime RX 9070 XT and its three 8-pin PCIe connectors, I'm planning to make my own custom PSU cables to avoid a nightmare with cable management.

Based on the Thorzone Nanoq S custom cable manual (https://thor-zone.com/mini-itx/nanoq/), I put together a parts list from ModDIY for my Corsair SF850 (2024). I'd love to get your feedback or recommendations before ordering (every connector comes with his pins):

Motherboard cable:

CPU Cable:

GPU cable:

With:

  • Total of 15.2m of cables
  • 20-30 ATX female eps pins (the connectors already come with their own pins, so these are just spares in case I mess up a crimp)
  • 20-30 Micro fit female connectors (just spares)
  • Wire crimping tool
  • Wire stringer tool
  • Pin remover (or just a paper clip)

A quick question regarding the wire: Has anyone used ModDIY's 16 AWG soft silicone wire with Corsair Type-5 (Micro-Fit 3.0) connectors? Since Micro-Fit housings are pretty tight, I want to make sure the outer diameter of the 16 AWG silicone insulation isn't too thick to fit properly into the PSU-side connectors, or if I should step down to 17/18 AWG instead.

Does everything look accurate and compatible, especially regarding the Type-5 pinouts and terminals? Thanks in advance!


r/sffpc • • 4h ago

Build/Battlestation Pics Should I take out my GPU and cooler for carry-on plane luggage?

Thumbnail
gallery
8 Upvotes

Hi, recently I've built my own SFF. It's SSUPD Meshroom D, 15L case.

The build was considered transporting in the first place, due to I have to move between countries several times a year and my laptop died. So here's how it went:

CPU: Ryzen 7 9700x

Cooler: Thermalright SS110 (for a really light weight of 500g and small dimension for less twisting torque)

RAM: Lexar 48gb 6000MT/s CL30

MB: MSI MPG X870i edge Ti WiFi

GPU: Asus Prime RTX5070Ti OC (for less thickness and weight)

PSU: Deepcool PS850P

It worked great, and it wasn't that heavy at all. It's my time for transportation, I've added a metal GPU bracket to (not very tightly) clamp the GPU from the other side, stuffed foam under and around GPU to make it as stable as possible. I also stuffed foam all around my luggage case and stuffed some clothes as well. The whole luggage case is only for the Meshroom D basically, and the PC is definitely not moving afaik when dragging the luggage case inside my house.

Now, I'm trying to carry this luggage on the plane, I'll handle this luggage as carefully as I could, and I'll 100% not check in due to some horrible movements I've seen. However, I've saw people claiming that you should always take out your GPU and CPU cooler or it will definitely gonna fail. Like they say your PCIE is gonna break, your MB will be twisted, your CPU could get removed from the socket together with the cooler, like that.

Should I really take my GPU off in this case? It would be a hassle to do this and actually defeats the purpose of ITX. But, I don't really want to risk my GPU especially considering the price nowadays. What should I do?


r/sffpc • • 6h ago

Build/Battlestation Pics My oncall companion

Thumbnail
gallery
120 Upvotes

Not the best setup but it gets the job done


r/sffpc • • 6h ago

Build/Battlestation Pics Rate my tiny travel pc

Thumbnail
gallery
10 Upvotes

My Specification

Cpu: Ryzen 7 3700x

Gpu: Msi Rtx 5060 8gb

Ram: Fury 32gb

Mobo: Asrock 550m itx/ac

M. 2: Wd Black Sn850x

Psu: Lian Li 850w


r/sffpc • • 7h ago

Build/Battlestation Pics T1 Reference Deep-ITX Build

Thumbnail
gallery
126 Upvotes

CPU: AMD Ryzen 9800X3D
GPU: RTX Pro 5000 Blackwell 72GB
Motherboard: ASRock Rack AM5D4ID-2T/BCM Deep mini-ITX
Ram: 32GB Gskill Royals @ 6000c26
SSD: Sabrent Rocket 1TB
PSU: Corsair SF850 w/ zcooi cables
Cooler: Thermalright AXP100 Full Copper w/ noctua fan
Case: FormD T1 reference V2.0 - TG side panel

Currently running qwen 3.8 27B q8 for local inference. Also using this for gaming - roughly 5080 performance. Runs cool and quiet.


r/sffpc • • 12h ago

Assembly Help RX 9070 black screen in S300 itx build, help.

1 Upvotes

Hi everyone, I’m troubleshooting my first Mini-ITX build and could use some help.

CPU

Ryzen 7 9700X

Motherboard

ASRock B850I Lightning WiFi, BIOS 4.10

GPU

ASRock RX 9070 Challenger 16GB

RAM

Single 16GB T-Force Vulcan DDR5-6000, currently running at default 4800

CPU Cooler

Thermalright AXP90-X53 FULL Copper

PSU

Corsair 750W

Case

S300 with PCIe 3.0 riser

SSD

Samsung 980 PRO 2TB

Monitor

LG 27GL650F-B, connected via HDMI

Problem I'm having is that with the GPU connected through the riser and powered, I get a black screen—no logo or BIOS—from the GPU’s HDMI output.

What I’ve checked:

Disconnecting the GPU/riser from the motherboard lets me boot into BIOS using the motherboard HDMI and CPU’s integrated graphics.

I have changed this setting - >

Advanced → AMD PBS → AMD Common Platform Module → PCIe x16 Link Speed → Gen3.

Reconnected gpu with the mobo through the stock riser, still got the black screen after pcie Gen change.

Reseated the riser at the motherboard and the GPU in the riser. The GPU appears fully seated.

Does this sound like a faulty riser, or is there another BIOS setting or troubleshooting step I should check first? Would trying Gen2 help narrow it down before dismantling the build?


r/sffpc • • 15h ago

Build/Parts Check Rate my first SFF parts list?

Thumbnail pcpartpicker.com
1 Upvotes

Go ahead and give any honest thoughts. I’d appreciate feedback now so I don’t regret anything in the future.


r/sffpc • • 15h ago

Assembly Help Ncase M2 question

1 Upvotes

Just did a build in the M2, but while gaming I ran HWINFO & saw my chipset hits 73c & the ssd hits 68-70c. Also, my ram hits temps of 58-60c. How are you guys managing to cool the ram? I had trefi at 65535 thought that might be the issue & swapped it back to 32767 temp lost -1c. Any tips on how I can possibly have a ram fan in there?

For reference, I have an Astral 5080 in the build.
Or am I overthinking these temps for normal gaming use. Thanks!


r/sffpc • • 18h ago

Build/Parts Check I plan to buy motherboard with x8/x8 bifurcation option. Does MSI MPG X870I EDGE TI EVO support this feature?

Thumbnail
reddit.com
3 Upvotes

r/sffpc • • 19h ago

Build/Battlestation Pics NFC 4TF Mk. 3.1

Thumbnail
imgur.com
29 Upvotes

Fully 3d-printed 4TF extra-long. I used NFC Josh’s MkIII, and added another 10mm of chassis and panel stretch with splices in the slicer. I added mesh sections as well to let pieces breathe better. I also used the motherboard tray from the 3DLP chassis and cut it to size in the slicer - that’s the lime peeking out to the left of the SO-DIMMs. This allowed me to run two Arctic P9 Max fans as front intakes, which produce an insane amount of static pressure if full load is needed. CPU intake is a Gen 1 Arctic BioniX. Yes, I know the lime is gaudy. Yes, I’m aware it’s not everyone’s cup of tea. Yes, Snorlax is the best Pokemon. The lime is almost a perfect match for Corsair yellow though, so it’s a nice little color pop.

Build as set up:
- Minisforum 790i 7945HX3D, -25 all-core undervolt, boost +150 core
- 64GB Crucial SODIMM, OC to 6000. CL is still dog water at 46, but the best available is 40 at lower frequency mhz.
- Vastarmor 9060XTLP at time of photos, thanks to a friend loaning it. -100mv, +150 core boost, +2850 memory, no change to board power limit. It’s replaced with a monster of a binned 5060LP that runs like a scalded dog.
- Enhance 8345 450W Platinum PSU
- 2x 2TB Predator GM7000 NVME SSDs


r/sffpc • • 20h ago

Assembly Help Dan Cases A4-SFX – experiences with 92mm AIO on 9800X3D?

1 Upvotes

I'm planning a refresh in my A4-SFX and considering a 92mm AIO for the 9800X3D instead of the usual air cooler. Main goal is lower noise under sustained loads without losing too much cooling headroom.

I’ve seen a few people run similar setups but not many long-term reports on pump noise or VRM temps in this specific case. If you’ve tried it, how did the acoustics and thermals turn out compared to a good air cooler like the Noctua NH-L12 or AXP90? Any particular AIO you’d recommend or avoid?


r/sffpc • • 22h ago

Build/Parts Check Need some case recommendations

1 Upvotes

Can you guys suggest a great SFF case for me?

the CPU and GPU components that I have right now and want to build the SFF around are:

Intel i9 12900k and
Gigabyte 6750xt OC (281 mm in length)

I need a case that has a low footprint like the KXRORS S300 but I know that having a low profile CPU cooler wont be good enough for the 12900k.

need help on this. But i really do love the S300 or at least at the same size but can fit a better cooler for the CPU..

I also need something in the budget friendly side like below $100 if that is possible.

thank you in advance.


r/sffpc • • 23h ago

Build/Parts Check AXP90x47 in NCase T1 - questions on fan modding with duct

3 Upvotes

I know there are variations of this thread on here, but I'm trying to get a solid answer on something.

I am planning to use the axp90x47 with a regular Noctua 92mm on a 9800x3D build. I know this doesn't necessarily improve temps but can improve acoustics.

I have also seen people who make a 120mm fan adapter duct (not just a flush mount, but a duct to better force air through the cooler). I think with my parts, I can squeeze in a 2 or 3mm tall duct

Has anyone tried this solution? If no improvement in temps, is there an even better reduction in noise? I'm aiming for silent during day to day tasks and no jet engines during gaming.


r/sffpc • • 1d ago

Assembly Help Jonsbo Z20 black-and-white build concept

2 Upvotes

Hi!

I’m planning to move my PC from an ATX case to something smaller in the near future. I’ve had my eye on the Jonsbo Z20 for quite some time now - the version with the glass side panel.

My main concern is aesthetics. I’m not sure which color scheme to go for. My current components are:
- Silver and white motherboard
- White RX 9070 Sapphire Pure GPU
- Black Arctic CPU air cooler
- Black RAM

I’m also planning to get a Corsair SF1000 PSU. Unfortunately, it’s only available in black where I live, but I found white replacement cables on Corsair’s website.

I’m wondering whether these components would look good in a black case and whether it’s worth trying to achieve a mostly white interior (with white PSU cables, white case fans and a white CPU cooler/AIO), or if I should simply stick with black for the remaining components and let the existing white ones serve as accents.

I’d like to see your builds and hear about your experiences. Any inspiration would be greatly appreciated!


r/sffpc • • 1d ago

Assembly Help I need help

Post image
0 Upvotes

I have a current build that's about 24 months old, I want to build some smaller but don't know where to start curious if I post my built will you guys assist in recommending cases and parts needed (I know I'll need a new MB for sure) picture below are what my current PC build I'm sorry I don't have a list.


r/sffpc • • 1d ago

Assembly Help For those of you that build your own cases, how do you do it?

6 Upvotes

I see that a lot of you use 3D printers, but my understanding is that those are mostly printing in PLA / PETG. What about those of you that use metal in your builds? Can you actually 3D print metal parts? Which printers are you using? And is the upfront cost of the equipment worth it?


r/sffpc • • 1d ago

Assembly Help Will a Sapphire Pure RX 9070 XT fit in the ZZAW D3? (1.5mm width clearance issue)

Thumbnail
gallery
21 Upvotes

Hey everyone! Has anyone built a system in the BRAVEMAN ZZAW D3 case? (Note: you can search for it on AliExpress, I didn't include the link so the spam filter doesn't delete this post).

I really like the look of this case and already have all the hardware for a Mini-ITX build. Right now, my PC is in a Thermaltake TR100 with a Sapphire Pure RX 9070 XT. It’s a pretty chunky GPU, so it obviously won’t fit into just any ITX case.

Looking at the specs for the ZZAW D3, the GPU width exceeds the case's stated limit by about 1.5mm. How critical is this in real life? Is there usually enough wiggle room to close the side panel, or is it a hard no? I tried asking AI, and it basically told me it's a 50/50 gamble, so I’m hoping someone with hands-on experience with this case can chime in.

Thanks in advance for any help or advice!


r/sffpc • • 1d ago

Others/Miscellaneous Next size up from A4-H2O to support dual 240mm rad?

3 Upvotes

I currently run an A4-H20 with a 13700k and a 3080Ti (the rest of the specs are unimportant/normal. My CPU has a EK-240 attached which works fine, and is in the standard top blower configuration, but my GPU is air cooled. I do already own the EK-Quantum Vector WB for the GPU, but I can't see how this case can support two 240mm rads.

Any thoughts on the next step up in case which would support a dual 240 configuration? I looked at the NR200 but it looks like it only supports 240 + 120? I don't like the configuration of the NZXT H2 and then the rest get a bit confusing as to support? Possibly the A3?


r/sffpc • • 1d ago

Build/Battlestation Pics Помогите советом!

Thumbnail reddit.com
0 Upvotes

r/sffpc • • 1d ago

Build/Parts Check Is My T1 V2.5 Optimized?

Thumbnail reddit.com
1 Upvotes