r/Creality_k2 • u/jaedav12 • 19h ago
Improvement Tips Desperate times calls for desperate measures
This seems to be doing the trick for me🤣 I’ve never had a prime fall until now. Does anyone have a better way of doing this?
r/Creality_k2 • u/jaedav12 • 19h ago
This seems to be doing the trick for me🤣 I’ve never had a prime fall until now. Does anyone have a better way of doing this?
r/Creality_k2 • u/TheAceVenturrra • 15h ago
I have tried to heat nozzle and force it through with no success. It appears to be firmly lodged into this piece of pipe above the hot end
r/Creality_k2 • u/Ordered-Chaos-1273 • 2h ago
This one is general curiosity. Im not talking about thermal grease onto the nozzle before replacing. I already did that however still having the 'Nozzle is heating unexpectedly' so I stripped the whole heater and found there is a little thermal grease between the ceramic heater and the headblock that holds the nozzle. Mine was dried up and virtually none existent.
Figured id try replacing the paste before buying a new heater and after PID tune seems to be doing alright again. Could find anywhere that suggested doing this and this is my 2nd full hot end in 800 hours.
r/Creality_k2 • u/InflationCurrent4288 • 8h ago
Ever since the newest update I’ve been having non-stop filament loading/ unloading issues and jams.
I can’t figure out why it keeps doing this. I’ve tried doing a factory reset but it won’t let me until I resolve the error code. I have already replaced the nozzle as well as took apart the upper portion of the extruder. I do not use my external spool and exclusively use my CFS which has also given me constant issues since updating. Please help.
r/Creality_k2 • u/thesneakerguy1 • 12h ago
Has anyone had this issue with the first few layers bubbling up on the edge? I switched from a 4 mm nozzle to an 8 mm nozzle and they started happening, and when I switched back to my 4 mm nozzle, it kept happening. I recalibrated it. Make sure it was changed on the printer and in my slicer and nothing I change fixes it. Any ideas or helps
r/Creality_k2 • u/raven-13011970 • 18h ago
hey peeps
how do i set up cura to use with my k2 printer and be able to use the multi colorer cfs system ...i used the creality print software (prefer Cura ) cant get the stringing issue sorted I've look on youtube but they all seem to point to creality print when i search using creality k2
anyone help a fella out plz
r/Creality_k2 • u/Visual_String_3425 • 3h ago
Why have I got this line every time I do a print. As of the last update, but decided to come up as a gcode error. Of course I'm a beginner haven't quite got to grips with all the technical jargon, but I put my own pants on this morning 🫡
r/Creality_k2 • u/ZeligD • 4h ago
I can’t seem to find any UK sellers of either device. Anyone know any?
Worst case, i end up buying a new plug for the AliExpress dryers as they’re all US/EU.