r/DIY • • 19h ago

help Suggestions on how to make a art piece with billiard balls and a triangle rack?

0 Upvotes

My girlfriend’s cousin is having their engagement party soon and the couple loves to play pool together. We had an idea to make an art piece with a triangle rack and billiard balls with the numbers of their anniversary date. Any ideas on how to attach the billiard balls to the rack? Thinking of having the balls in the lower right corner and the bracket at the top point of the triangle.

Anything helps, thanks!


r/DIY • • 19h ago

help How to secure custom bespoke wardrobe to the wall ?

0 Upvotes

Hi all,

I’m currently assembling a custom 3-bay wardrobe (total width ~2448mm, height 2360mm, depth 600mm) made entirely of 18mm panels, including solid 18mm back panels. Each bay is built in two parts: a ~368mm drawer base unit on the bottom, with a ~1992mm tall wardrobe carcass sitting on top (fastened together).

Two of the bays are already built, joined together, and standing in place. Because of the skirting board and uneven walls, there is roughly a 30mm void/gap between the back of the 18mm wardrobe back panel and the wall. There's also only about a 70mm gap between the top of the wardrobe and the ceiling, so I can't easily get behind or over the top of it without dragging the whole thing forward.

The wall behind it is dot-and-dab plasterboard over brick/block.

What’s the cleanest and safest way to anchor this to the wall from inside the cabinets without bowing the 18mm back panels or dropping fixings down into that 30mm void? Would extra-long Corefix fixings work straight through the back panel, or is there a better trick for bridging that gap?

Thanks in advance!


r/DIY • • 19h ago

woodworking What is the best way to shave 1/8th of an inch off a pine common board?

65 Upvotes

I'm in the middle of a DIY project to add extra shelves to my out of production Kilby IKEA bookcases. So far things have been going pretty well, but out of the 16 shelves I just made and the 32 I already had that I am adjusting, about a dozen were too big to fit in the cases after I started using brackets instead of support columns. I was able to fix about half of the ones that were only slightly off, but I still have at least half a dozen common boards that are about 1/8th of an inch too wide.

I've tried using a metal file and a shaver, but both provide very little progress. I tried to get a rasp, but the only one I found locally was about twice as wide as the boards, and looked pretty similar in design to the shaver. What is my best option here to reduce these boards?

If it matters, this is for common boards (pine I think) that are 25" by 6" by 1" and I am trying to go down to 24 7/8".

Also, I don't really have a workbench I can use. The only friend that has one has it buried at the moment.

UPDATE: Thanks everyone for all the responses!


r/DIY • • 2h ago

home improvement Toxic gas from tub refinishing, bathroom has WALL on window, rainy, not dissipating

0 Upvotes

Not actually DIY, landlord hired someone.

Situation:

  • singular window in bathroom has big tall 'wall' (from which shower head was built from?) 6-10 inches away from the window. There's a sink on one end and something beneath it / there's very little room/access and the 'wall' is also high up. It is effectively blocked off and useless. I have tried to aim air into it, but the small bathroom's design makes this kind of impossible.
  • there's a vent we've been running, but I don't know that it actually works
  • apartment has no centralized air/heat/fans/anything. Narrow hallways, small rooms, no easy airflow.
  • bathtub was refinished. Was told the gases/paint were super toxic. Was told it'd be safe to come back around 2pm. Opened all windows and doors. Repair person brought a big fan, which he's thankfully left me with for now, but it was pushed into the wall/window tiny area while he was here with bathroom door closed, so I don't think any air actually left the bathroom. Came back around 4pm ish, initially thought maybe it was okay, but realized all toxicity initially still trapped in bathroom.
  • Toxic air has slowly been spreading into hallway etc.
  • Rooms / hallways around toxic tub smell like toxic paint. Had made my throat hurt yesterday

Have tried / are trying:

  • Moved into bedroom further away. This room's air feels good/clean
  • have HEPA air filter running in toxic tub bathroom with the fan on, window open as rain allows
  • have another HEPA air filter running, alternating its use between hallway/area outside toxic bathroom and room we sleep in
  • planned to keep all windows open and leave house again today in hopes it'd air out, but it rained all night last night, is due to rain all day today, and is due to rain again all day/night for next 3 days....
  • Room we're sleeping in is "far away", between that, window, and air filter, air feels good here. Immediately feels horrible when bedroom door is open. Kitchen is outside bedroom door and relatively better, but also noticeably toxic when first opening door into other rooms.
  • debating between staying home and opening windows as able with rain and leaving with filters fan etc on. Staying home can mean reduced exposure if staying in faraway safer air room, but means exposure. Not staying home means all windows need to be closed due to rain. Can only open windows for 10 mins or so periodically anyway due to rain, so not sure it's worth it.
  • debating between having bathroom door closed vs open. Open means toxic gases go elsewhere, but closed means it might. never get chance to air out period given window-wall situation. Have bathroom vent on and HEPA filter and fan on in bathroom regardless.

I don't want long term health issues here, obviously. I have no control over the insane design choice they made to put a WALL a couple inches blocking the window (also potential mold issues here because of that, and yeah, not a great landlord on multiple fronts). I have no control over the rain and timing of rain/repair. I'm doing what I can with the HEPA filters and strategic fan aiming and door closings and window openings, but so far, it has NOT been enough. I don't know what constitutes full on unsafe and what's just 'annoying' or 'bad' but not long-term bad. We have no reason to go into the shower-bathroom regardless for a couple days as the tub needs to dry regardless.

Advice on how to get this toxic gas out of our apartment?


r/DIY • • 3h ago

help Does anyone actually keep track of how much they've saved doing DIY?

0 Upvotes

Just something I was wondering about today.

Over the years I've done a lot of DIY repairs and projects, both around the house and on vehicles, and it got me thinking about how much money I've actually saved by doing the work myself.

I've never really tracked it. Once the job is done, I move on to the next thing.

Do any of you keep records of your projects, receipts, photos, costs, notes, etc., or do you just finish the project and forget about it?

I was thinking it might be interesting to have a way to look back through everything you've fixed or built over the years and see what you've accomplished.

Curious what everyone here does now. Spreadsheet? Notebook? App? Or nothing at all?


r/DIY • • 19h ago

Trade tips for garage insulation

37 Upvotes

I’ve been planning to insulate my garage and eventually drywall. The insulation process is pretty straightforward, but what advice or “trade tips” would you share with a DIYer? Is there anything specific about bug or water treatment prior to insulationi? Any advice on more accurate estimation of supplies? Commonly overlooked factors that delay the project?


r/DIY • • 22h ago

help Soundproofing on party wall in rowhome

41 Upvotes

Been living in my current home for the past year and a half. Before I continue on I have talked to the neighbor, it helped some but not all the way. Neighbor has obnoxious barking dogs and I am trying to figure out way to dampen the noise from their house into mine. The reason being is because I work from home and it can get a bit obnoxious being in meeting and hearing the barking. Any suggestions on possible solutions to this issue?