r/MEPEngineering • • Aug 07 '26

Career Advice Anonymous Salary Database

25 Upvotes

r/MEPEngineering • • 6h ago

Question Engineering Retirement

13 Upvotes

Hello there!

I am an active electrical professional engineer in my state, licensed since 1999. I retire in a couple of years at age 65. I'm wondering whether to do a little electrical consulting work or something completely different. Several of my peers died shortly after they quit working completely.

What are your thoughts on this matter? Frankly, I love what I do, but dealing with customers is the hardest part of my work; I'm okay at that skill.

Thanks all and good luck.

Philip in Georgia


r/MEPEngineering • • 1h ago

Tips on finding revit 2020 families for Hvac, fire protection and plumbing equipment

0 Upvotes

Hello there fellow engineers, I am mechanical engineering graduate looking forward to start a career in MEP and I would appreciate some advice as to how to obtain free equipment families if possible or if I should create a replica for the following equipment: 45 ton VRF unit + 20 ton unit VRF 500 GPM diesel and electric fire pump 50 gpm jockey pump. I want to make a decision between creating replicas identical to real life equipment incase i Don't find available models or if i can find catalogs online. Revit is currently a requirement as of date and i am grateful to learn from your experiences as to how i can navigate my way through it. Thank you in advance.


r/MEPEngineering • • 1h ago

Does MEP life good in india ?

0 Upvotes

I am a mechanical engineer with BIM MEP experience for 7 months , how is the stream going , does it pays well in positions ? And whata are the opportunitys out there , if you read please reply I'm very confused.


r/MEPEngineering • • 23h ago

I built a 3D + 2D browser simulator (with Gemini Argon) to visualize pump flow-stealing, the 3D separator rule, and why Qp > Qs kills boiler condensation

4 Upvotes

I put together a single-file 3D + 2D hydronic simulator (Three.js + 2D Canvas P&ID) using Gemini Argon to help visualize primary-secondary decoupling and low-loss header regimes for junior engineers and students.

**What is modeled and analyzed:**

- **Direct-Coupled Pump Conflict (No Separator):** A primary boiler loop (DN65) tied directly to 3 secondary zone pumps with different shutoff heads: Z1 Panel Radiators (55 kPa), Z2 AHU Heating Coil (110 kPa), and Z3 Underfloor/FCU loop (38 kPa). When primary flow lags and Z2 ramps up, manifold pressure drops to `-30.7 kPa`, starving Z1 to `56%` and pulling `-0.68 m³/h` backwards through Z3 (with a toggleable non-return check valve on Z3).

- **Caleffi 3D / 10D Sizing Rule:** Adjustable `DN50–DN100` headers and `1.5D–4.0D` separator body ratios showing internal velocity (`v = Q/A = 0.100 m/s` at `3.0D` vs `≤ 0.15 m/s` threshold), air microbubble venting, and dirt separation efficiency.

- **Coupled Enthalpy Balance across the 3 Separator Regimes:**

  1. `Qp = Qs` (`12.0 m³/h`): `70.0 °C` supply / `52.5 °C` return (`< 54 °C` flue dew point → condensing active at `91.0%`).
  2. `Qp > Qs` (`13.8 > 6.95 m³/h`): Hot downward bypass mixes `70 °C` supply into `46.4 °C` building return, raising boiler return to `58.1 °C` and killing condensation.
  3. `Qp < Qs` (`7.2 < 13.45 m³/h`): Upward return recirculation blends secondary supply down from `70.0 °C` to `58.9 °C`.

Live browser simulator (single HTML file, no install):

https://www.meptasarim.com/hydraulic-separator-simulator.html

*Disclaimer: Informational & educational model only — not for engineering design.*

For those of you commissioning condensing boiler plants: how often do you still find constant-speed primary pumps running in Regime 2 (`Qp > Qs`) and preventing the boilers from ever condensing?


r/MEPEngineering • • 23h ago

Steam Condensate Drain Below Pump Inlet

3 Upvotes

Title. I have 4 steam coils on the return of an AHU (don’t ask). The drain outlets on the bottom two sit about 6” off the ground and the inlet to my condensate pump sits about 18” off the ground. I do not have much experience with steam and haven’t had much luck asking colleagues. Would a solution be to drain the two coils into reservoirs and pipe that to the pump with a check valve downstream of the reservoir? Or do I need a pump for my pump…


r/MEPEngineering • • 1d ago

Confusion

Thumbnail reddit.com
2 Upvotes

r/MEPEngineering • • 1d ago

Typical industry? Or company specific?

16 Upvotes

Hi I’m the wife of an EE in MEP. I work a cushy gov engineering job so I’m not familiar with how things are in industry. He complains constantly about work, that he’s suffering, stressed, terrible clients, etc. It feels like just about every week, he works more than 40 hours and still has tons to do. He travels as well, which usually means he has to work nights or weekends to make up what he couldn’t get done since he was out of the office. This past week, he worked from home a day to pick up a buddy from the airport and then took one day off for a wedding. And is now complaining to me about how he’s egregiously behind and shouldn’t have even taken the time off or “done anything fun.”

is this solely a company issue? The unspoken expectation seems to be that 40+ hours is normal. Anything less than 40 is somewhat frowned upon. I have tried to encourage him to find a different job, at least one closer to home (his commute is ~60m one way). But before I brought it up again in response to his complaints, wanted to ask other MEP engineers. Is this just the industry norm or is the grass really greener elsewhere?


r/MEPEngineering • • 1d ago

PMs Wasting Time and Scope Stealing

14 Upvotes

Need to rant a little and hear other peoples experiences on this. Work at a medium size firm with differnt mechanical groups (MEP, process, etc) Working on a large industrial steam boiler system, admittedly not something usually covered by MEP, but my boss asked me to lead it because I have some experience in it. It's a fast timeline so I spent a good deal of overtime getting the project moving only to find out that a process mechanical team have been working on it for a while and are nearly done. Sure, I learned alot, but with alot of extra time and stress I didnt need.

That's annoying sure, but the bigger issue is this is probably the third time this year another group has tried to muscle us out of our scope. On top of that, the other lead tried to talk down to me like I didnt know what I was looking at only for us to have nearly the same sketches and drawings.

Anyone deal with scope fighting like this? Company culture overall is lacking discipline between middle and upper management, but wondering how others have dealt with it.


r/MEPEngineering • • 23h ago

Magicad cracked

0 Upvotes

Does anyone know where to get magicad cracked version for autocad?


r/MEPEngineering • • 2d ago

A free practice problem for the Mechanical Engineering PE Exam (TFS and HVAC&R). Post your answer in the comments!

Post image
6 Upvotes

r/MEPEngineering • • 1d ago

Engineering THIS IS GOOD

Post image
0 Upvotes

cross posting this:
I might just get bashed for trying out an "ai tool" but i am going to ignore those. just tried out what my friend built. im championing this tool for my firm and it's been p helpful so far. i use it for it's QAQC, submittal review and specs extraction; but i believe they also have one line generation, tag placements amongst others which i haven't tried as it's not being taken by our firm. What i found most useful was that it would auto generate markups with the exact location to collaborate with my team or export to bluebeam (attached a screenshot).

the analysis was across 44 drawing sheets, 501 pages of project manual & 36 maker sheets (around 150MB of files), and the results came back in 10 min

DM if you wanna try it out, i can put u in touch w the founders. they're doing free trials. if you don't have anything nice to say, please ignore this anyway. only intended for those who want to try it out

p.s: there's no gain for me to post this, i just know the founders personally from school


r/MEPEngineering • • 2d ago

Revit/CAD is revit hanger modeling worth it on a hospital job?

8 Upvotes

BIM coordinator for a mechanical trade contractor. GC on our hospital job put fully modeled and coordinated hangers in the BIM execution plan and my detailers are already pushing back on the hours.

I see it for slab on deck where the inserts go in before the pour, since a miss there means drilling and anchors later. Same for congested corridors and above ceiling, and if the layout crew is shooting points with a total station from the model. Open mechanical rooms and open floors I'm not sure about. In my experience the field moves hangers anyway when the model doesn't match what's there, and nobody updates the model after.

Has anyone done this on a full job and thought it was worth it? Also wondering if anyone uses hanger placement automation or if everyone is still placing them by hand.


r/MEPEngineering • • 2d ago

Career Advice Electrical design jobs

1 Upvotes

Hello everyone!

I am an EE that got let go from their company and am taking it as an opportunity to grow. I have 2 years of experience leading our team’s electrical design. I am looking for work preferably around Texas and wanted to put myself out there through here as well. Let me know if you have any leads you may know of or opportunities as well as tips for me. Thanks in advance.


r/MEPEngineering • • 2d ago

Career Advice How stressful is it to be a senior mech engineer at Google datacenter

0 Upvotes

r/MEPEngineering • • 2d ago

10 free beta spots for a platform that can 10x your MEP productivity

0 Upvotes

I’m a young founder of an Artificial Intelligence Research Lab that has a specific focus on MEP and the broader AEC domain

I’ll keep it brief. We built a platform powered by the model & harness we’ve built. We’re currently working with several small-mid MEP firms out of US and an $8 billion dollar EPC contractor.

The platform does full set QA/QC, Submittal reviews, RFI drafting, Code compliance and a host of other things. And early feedback suggests 5-12x productivity gains across several tasks, but you don’t have to take my word for it

We’re looking to onboard 10 MEP engineers from the US, who believe the way forward is humans+AI (please don’t start an AI doomer thread here) and have been super curious to explore this frontier. Your AI usage on the platform will be covered for a whole year and we’d love to work closely with you

DM me if this sounds like your thing


r/MEPEngineering • • 2d ago

Engineers who work away from their desks: What electronics do you actually carry and use?

Thumbnail reddit.com
0 Upvotes

r/MEPEngineering • • 4d ago

VVT vs. VAV in HAP: Why is Central Heating in system components available for VVT but not for VAV?

4 Upvotes

r/MEPEngineering • • 5d ago

Free LEED practice exams, and Simplified LEED Exam Prep

12 Upvotes

I am a USGBC Faculty and LEED trainer at Archiroots (USGBC education partner).
Become LEED Accredited in 2 weeks rather than months using the below:

Free practice exams:

Exam prep courses

Questions about the LEED v5 exams or WELL AP? I'm here to help.


r/MEPEngineering • • 5d ago

Incompetence

32 Upvotes

Anyone leave a job because they realized a pattern of incomplete and half baked major projects being delivered? I'm in a group with a sink or swim PM, and several team members sink, but their work still gets issued and then becomes a pain in the ass in CA. BIG mistakes, and I feel I'm doing my best to keep my own discipline afloat. It's a lot of stress and I feel I'd be better off mentally elsewhere.


r/MEPEngineering • • 5d ago

What is your company’s gross margin?

12 Upvotes

Our place is charge out rate + 25% margin. Let’s say it is 130$/hr + 25%
Before I started helping with proposals I thought charge out rate is like ~ 1/3 my salary , 1/3 benefits, office rent, admin and 1/3 margin.
Is it just my place?


r/MEPEngineering • • 6d ago

Discussion Over 2,400 supporters have now voted for MOCingbird's LEGO IDEAS model "The Urban Water Cycle". Featuring some above-ground pumps and a pump mechanic, the model received endorsement from Sulzer and other water industry companies. It needs 10,000 votes for the chance to become an official LEGO set.

Thumbnail gallery
15 Upvotes

r/MEPEngineering • • 6d ago

Has anyone worked at all 3: consultant, contractor, and client side?

22 Upvotes

Would like to hear your experience and what role you liked best, what paid best, what was least stressful, what required the least overtime hours!