r/turning • u/300_chickens • 23m ago
After a couple of blow-aparts, I went with a simple shallow bowl to get some confidence back.
Wood: I have no idea
r/turning • u/300_chickens • 23m ago
Wood: I have no idea
r/turning • u/plumconchblower • 14h ago
Hi everyone. My Jet 1221 won’t run. When I try to turn it on, the drive center makes 1/4-5 revolutions and then stops. If I leave it unplugged for awhile, it seems to turn more before stopping. Sometimes it won’t turn at all. I noticed the belts squeaking the day prior and adjusted the belts, but that didn’t fix the squeak. Today when I went to turn it on as I was going to try a tiny bit of belt grease, but it simply won’t work. It’s still less than a year old so I’m a little surprised I’m having issues. Has anyone had this issue before or perhaps know what’s happening?
r/turning • u/FriJanmKrapo • 20h ago
Took some time today to use a piece of dogwood a friend gave me from his tree. It's a very good hardwood as far as strength, but wow, it doesn't like much else. Had to sharpen up the chisels to be able to work it properly, as even though they weren't dull, this stuff needs extra-sharp tools. The good part is that it's kind of hard to get it to tear out. Now I just need the epoxy I used to seat the HSS and the ring to fully set. So that'll be some time, about this time tomorrow. I left about 5 1/8 inches of HSS sticking out, so I should be good to go for a while.
I need to start getting longer pieces of HSS, though. I need to stick with 250mm at least.
Specs on this one: 7mm x 200mm, or just a hair over 1/4" and 7.8ish inches long. The completed piece is 5 1/8th inches long HSS, and the handle is 10 5/8ths inches long.
r/turning • u/cornwithnokernels • 21h ago
I use my Woodmizer to supply a group of turners and woodworkers with really nice stuff. Here’s some pictures of some recents- spalted sycamore, spalted Holly, figured maples of sorts, etc..
If you wanna tune into what I offer, feel free to join my Facebook group. This is the only place where I post
https://www.facebook.com/share/g/1Hs8nDY5fN/?mibextid=wwXIfr
r/turning • u/Herrben • 23h ago
It’s light and seems really well made. I’m pretty sure it’s turned wood. Does anyone know what the markings might mean and when it could have been made. Thanks.
r/turning • u/Artifex75 • 1d ago
Got lucky on the spalting, finished with my own wax blend. This is the first large bowl I've ever turned. Struggled with some tear out in the punky areas, but I think it turned out okay.
r/turning • u/RussTheWoodArtist • 1d ago
I made this vase from ribbonwood burl and purple epoxy. The video follows the build from making the mold and casting the resin through turning, shaping, hollowing, and finishing.
There were a couple of setbacks along the way: a small epoxy leak during curing, then a deep scratch near the neck that remained visible after the topcoat cured. I ended up shortening the neck slightly to remove it, which changed the proportions from my original plan.
Curious what you think of the final shape and the combination of burl and purple resin.
r/turning • u/Thrasher54 • 1d ago
So I wanted to get into turning wine bottle stoppers as christmas gifts, and what I believe to be the last piece I needed to get started is arriving today. I ordered this 3/8 x 16 mandrel from OTCC: https://turningnorth.ca/products/3-8x16-bottle-stopper-mandrel?srsltid=AYCX9vI9xla7pcjKrRFVL0xGXlOL3KaBzySB93WCVbMOWaotpzs6JaR_
My original plan was to use my Drill Chuck with a MT1 in the headstock, but I'm not positive that is the solution, as I'm not convinced this is the safe/appropriate solution for me to turn these bottle stoppers.
Is there a way for me to thread my chuck on with an adapter? I was reading in other posts to use a draw bar, but I unfortunately have a 1/4" threaded rod, and know it wont fit through the headstock hole on my lathe.
Any and all advice is greatly appreciated!
r/turning • u/Capt_Heinz • 1d ago
Norfolk Island pine. I'm getting ready to take this down a couple more inches and I'd like to know the best way to go about it. I've turned the log to a nice cylinder. It's going to be a utensil holder in the end if I can get it to keep together. My question is, how do I reduce the amount of tear out I get on this really dry piece of wood?
r/turning • u/Chadillac01 • 1d ago
Going to put a thin coat of resin on later today. Hoping it’ll give it a little shine.
r/turning • u/Help_SendLatinas • 1d ago
Question: anyone ever turn a “Memorial” ring? Where you get a ring blank with a groove, fill it with ashes, then turn it? I assume you would add layers of CA and ashes like you would do with any other filler?
Could you tell me any particulars? Id like to make a ring to wear with Otto, my since passed Golden Retriever. 🥹
r/turning • u/Sirocka • 1d ago
I got the walnut for free from Rockler and the cherry was leftover from some other projects. I knew the bowl was going to be shallow and I didn't have much room for a mortise, so I drilled a shallow one, turned a piece of maple to the exact diameter, and glued them together. This served the double purpose of giving me a solid tenon and giving me a lighter spot to brand the bottom. Unfortunately I messed up the bottom and my brand a bit, so I'll take it to a friend with a larger lathe and clean it up with their cole jaws when I get a chance. This was basically the max diameter of what my lathe can handle.
r/turning • u/citationstillneeded • 2d ago
Hi all, I'm posting a link to this video I've been working on for the past few days.
I have had a lot of trouble getting good shots of my pole lathe turning but I think this shows the process very well.
Interested to hear your thoughts.
r/turning • u/MaxeBooo • 2d ago
Hi there everyone!
My parent is very much into wood turning and I was thinking of getting them a gift for it! One idea I had was getting a local piece of wood (I live in BC Canada currently) for them to turn. If you have any advice it would be greatly appreciated!
r/turning • u/BreadcrumbsandRoses • 2d ago
There's a saw mill/slab sales place near me that's very generous with their offcuts, and I get greedy, so I have all these odds and ends of exotics, cool grain patterns, etc. I'm stuck on what to do with wide pieces of endgrain, like cross-section cookies or the last few inches cut off of big beams.
I've thought about cutting along the cracks (there are usually some cracks, that's why they're offcuts) to make small pieces like pen blanks, or cutting them into strips, then cutting the strips into wedgies as soon as I work out how to orient everything so the grain points the right way in the end.
Any tips? Favorite projects that either incorporate endgrain or require a lot of short (1"-4") pieces? I mostly do turning, but I guess there's always cutting boards.
r/turning • u/BlueValk • 2d ago
There's a very tall elm in my yard (not pictured, this is just an example) which needs a rather intense cut before winter because it is unfortunately dangerous. Fingers crossed it will survive the cut, somehow.
Now, I'm new to turning and I'd love to keep the tree pieces to turn them. At least I could change the wood into some beautiful pieces, maybe. Is there anything I should know? Can I just keep the pieces under my deck throughout winter until I'm ready to turn?
r/turning • u/mrsmedistorm • 2d ago
Hello, looking for some help identifying a part off what I think was a told a Rikon band saw and what im guessing is around 14" based on how it was described to me. I was asked if I could 3D print a new piece as shown but I'm not exactly sure where this piece is on the band saw. I was told there are two of these near the Blade and that one had gotten sucked up by the guys family member by the vacuum when cleaning up the saw after use. Does anyone have a Rikon saw that recognizes this part that could give me a clearer picture of where this part goes and its function and maybe a picture of what a complete part looks like? I have to model up a new one in Solidworks and 3D print one which is fine but I think im missing a portion of it judging by the cut marks on the one I have been given to model off of.
r/turning • u/Resipsa251 • 2d ago
I left this 15 inch in diameter piece of Bradford pear for three years in perfect conditions hoping it would dry. Probably about three years short of what it would take. Not one crack in it. I was hoping to do an end grain bowl. I turned to remove the bark. Next day the cracks. I have another one the same size. Not one crack in it, but it still has the bark. Another one bites the dust.
r/turning • u/FriJanmKrapo • 2d ago
I already filled it up a good 7 times this weekend just cutting up the pile of firewood. I have a couple of cords of cherry to process, and I made a decent dent in it this weekend. I was using a stack of pallets as my work surface, as it put the pieces at the right height to work on them, and I have loads of pallets around as it is...
The second photo is most of the cut-offs from the shenanigans this weekend. There are also a lot of pieces that fell into the stack of pallets. Regardless, I had fun making large piles of sawdust and shavings. I just need to clean up the blanks and get them trimmed out better.
Just in the last day, though, I noticed one of the blanks really started drying crazy fast, or it just had a lot of tension as it started cracking weirdly already, so that will likely get recut into pen blanks.
r/turning • u/FriJanmKrapo • 2d ago
I was looking for a smaller tool to reach tighter spots and add some fine details, and I'm quite happy with it so far.
I finished it last night and quickly tried it on some parts I had been meaning to finish for another project, and I'm really pleased with the results and how easily it gets into tighter spots.
With the steeper angle of the grind, I'm able to get into some nice tight spots to help clean up the beads or just make some finer detail. I got a couple of these 7mm x 200 mm bars, so I'll also be grinding out a mini skew as well. I also gave them a slight hollow grind on the "flat" surface.
For the normal SAE people 7mm is just a hair over 1/4" and they are 7.87" long. Perfect for most detailed work. And at 3 dollars each, I've got some good detail tools; well, I'll have some nice detail tools once I grind one of the other rods. Right now, it's just the one. I would have done one other last night, but it was getting too cold in the shop, and I was playing too much with the new tool.
Now I just need to make some more handles for them... I'll have to check to see if the branches I cut off the red maple last year have dried out enough yet.
r/turning • u/emiel1741 • 2d ago
Turning bowls is fine and fun. But wanted to make some Christmas ornaments.
Mistakes made:
- used too crappy wood (foot of a palet)
- did to many unsupported grain cuts
- using my bowl gauge wrongly and too aggressively
- removed back center while the ornament wasn’t running true in chuck
- didn’t wet sand or treat the wood before painting so form very smooth it went back to super rough once the water based paint touched it
I’m very happy that I was wearing a face shield and in the end i still got one very rough ornament so I’m happy with the proof of concept and will keep learning
Any advice is always appreciated
Sorry for posting an amateurish project between all these masterpieces but i gotta start somewhere:D